COMPREHENSIVE MAINTENANCE OF TILING, PLUMBING, SANITARY FITTINGS, JOINERY, ELECTRICAL FITTINGS/ FIXTURES AND ALLIED WORKS OF TOILETS AT AIRMEN BILLETS AT 8FBSU, AF

B/R PORTION

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish of the premises complete.

M&L 25mm PCC 1:2:4 Type B-0 (Using 12.5 mm graded crushed stone aggregate) as in sub base floor, complete all as directed and specified .

M&L coloured/printed non skid ceramic tiles 7 mm thick (square/ rectangular) area of each tile exc 0.11 but not exc 0.16 Sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.

M&L coloured/printed ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450x300x7mm / 350x250x7 mm / 450x350x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10 mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 18-20 mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15 mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, complete all specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

Demolition of cement concrete to ground floor (unreinforced) and paving n.exc 15 cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in plinth protection even and smooth without using extra cement, complete all as specified and directed.