REPAIR/MAINTENANCE OF LIGHTNING PROTECTION, OTHER CONNECTED WORKS AT HIGH RISE BUILDINGS AND REPAIRS/REPLACEMENT TO INTERNAL ELECTRIFICATION, LED FITTING / FIXTURES IN OTM ACCN, JCO/ORS MD ACCN AND DEF CIV QTR AT COLABA UNDER GE (WEST) COLABA

Amount

Taking down and up for old unserviceable earthing of GI plate from trenches all as specified and directed.

Taking down and up for old unserviceable earthing of copper plate from trenches all as specified and directed.

Taking down and up for old unserviceable copper strip of any size from pole wall/roof/trenches all as specified and directed.

Taking down and up for old unserviceable aluminium strip of any size from pole wall/roof /trenches all as specified and directed.

M&L in reapir excavation of old existing earthing including removal of old earthing plates, earthing materials, earthing strips etc and returning filling the same after replacement of earthing plate, earthing materials like coke, salt etc all as specified and directed. Note: (i) All the earthing materials like earthing plates, earthing strips, coke, salt etc will be measured and paid seperately under relevant items.

M&L for replacement in repair refilling of earthing materials charcoal, salt in sufficient quantities at par the satisfaction of Engr - in- Charge for better results in existing earthing all as specified and directed.

M&L in repair PCC (1:3:6) type C-1, 40 mm thick chamber all as specified and directed by Engr - in - Charge.

M&L in repair RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as specified and directed.

M&L for earthing complete with copper plate electrode 60 cm X 60 cm X 3.15mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the earth plate not less than 1.50 metre below normal ground level but using copper strip 20 × 3.15 mm as earthing lead by means of copper bolts, nuts, check nuts, washers, all as shown in electrical plate No 3 of MES schedule part-I, earth lead strip connected to indicated position including concrete pit in PCC 1:3:6, type C1, precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in precast slab and 20 mm bore galvanised iron pipe "medium grade" for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil complete all as specified and as directed and testing on completion all as specified and directed.

M&L for earthing complete with using GI earth plate electrode 60 cm X 60 cm X 6 mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the earth plate not less than 1.50 metre deep below normal ground level but using galvanised iron strip 25×4mm as earthing lead by means of GI bolts, nuts, check nuts, washers made out of GI/steel, all as shown on electrical plate No 3 of MES schedule part-I, earth lead strip connected to indicated in position including concrete pit in PCC (1:3:6) type C1, pecast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe medium grade for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil all as specified and as directed and testing on completion all as specified and directed.

S&F earth continuty conductor fixed by sadles not more than distatance of 50 cm between two saddles with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop earthing by 25 X 4 mm GI strip all as specified and directed.

S&F earth continuty conductor fixed by sadles not more than distatance of 50 cm between two sadles with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop earthing by 20 X 3.15 mm copper strip all as specified and directed.

S& earth continuty conductor fixed by saddles not more than distatance of 50 cm c/c with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop earthing by 25 X 3.15 mm aluminium strip all as specified and directed.

S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long fixed on GI pole by nuts, bolts, washers all as specified and directed.

S&F Air termination, single pointed copper rod 12mm dia and 300mm long fixed on GI pole by nuts, bolts, washers all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screws for fixing strips all as specified and as directed.

S&F in repair 4 digital electromechanical lightning event counter in weather proof resistance all as specified and directed. Make:- JEF Techno or erico as approved by GE

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in hard/dense soil all as specified and directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point all as specified and directed.

M&L GI pipe light grade 50 mm dia laid in trenches for cable /strip protection all as specified and directed .

M&L GI pipe light grade 40 mm dia laid in trenches for cable /strip protection all as specified and directed .

M&L GI pipe medium grade 15 mm dia laid in trenches, fixed on wall for watering of earthing pits including connecting up existing nearby pipe all as specified and directed.

M&L for cutting existing steel tubing of size 20/25 mm dia bore for alterations or additions for tapping new connection all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm bore dia all as specified and directed.

Supply and fix bib taps, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm bore dia all as specified and directed.

S&F integral LED aviation light comprising of aluminium housing with polycarbonate enclosure including necessary fixing arrengements all as specified and directed. Make:- Bajaj-BGAV 302 LED/SHAKTI/HAVELLS

Material and labour for Sub main wiring in repair, with two run of 2.5 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires including taking down old unserviceable submain with all associated fixtures complete all as specified & as directed Make : Polycab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 2.5 sqmm cable and one run of 2.5 sqmm cable with PVC conduite shall be measured as one length.

Supply and fix white Metal flush box 1/2 module all as specified & as directed

M&L fabrication work with cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specifeid and diredted.

M&L for Sub main wiring in repair, with two runs of 10 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from panel / Main DB to house SPN DB including taking down old unserviceable submain with all associated fixtures all as specified & directed by engr-in-charge. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

M&L for Sub main wiring in repair, with two runs of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from panel / Main DB to house SPN DB including taking down old unserviceable submain with all associated fixtures all as specified & directed by engr-in-charge. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M&L for Sub main wiring in repair, with two run of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from Internal DB to DB including taking down old unserviceable submain with all associated fixtures all as specified & as directed. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length.

M&L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, passing through PVC casing caping including modular PVC Gang box of suitable module for mounting of modular Switchs & Sockets as required at site along with one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLSH as earth wire connected to earth dolly complete all as specified & as directed by engr-in-charge for one light point/ Exhaust fan/ Wall Fan controlled by one switch including taking down old unserveceable point wiring. Make of Wire : Anchor / Havells / Finolex of ISI mark as approved by GE

All as per item No. 34 above but One bell point controlled by one bell push.

All as per item No. 34 but One ceiling fan controlled by one switch & regulator

All as per serial no.34 here-in but for one light point controlled by two way switches (two way switch point wiring)

All as per item No. 34 but One 3 pin socket point 5 Amps on independent board

All as per item No. 34 but One 3 pin socket point 5 Amps on same board

All as per srl item No 34 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified and as directed.

All as per srl item No 34 here-in-before but for AC point 20 Amp with 4 sq mm PVC unsheathed FRLSH wire along with 4.0 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & directed.

M&L for point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module including taking down old unserveceable point wiring all as specified and directed. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Conduit : Precision/ Prestoplast/ Polycab

All as per serial item No.42 here-in before but for bell point controlled by one switch.

All as per serial item No.42 here-in before but for one light point controlled by two way switches (two way switch point wiring)

All as per serial item No.42 here-in before but for One ceiling fan by one switch & regulator

All as per serial item No.42 here-in before but for One 3 pin socket point 5 Amps on independent board

All as per serial item No.42 here-in before but for One 3 pin socket point 5 Amps on same board

All as per serial item No.42 here-in before but for one socket point 15 Amp with 2.5 sq mm PVC unsheathed FRLS wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed.

All as per srl item No 42 here-in-before but for AC point 20 Amps with 4 sq mm PVC unsheathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed.

S&F in repair Moduler Switch, flush type single pole, one way 6/10 Amp all as specified & as directed.

S&F in repair Moduler Switch, flush type single pole, one way 16 Amp all as specified & as directed.

S&F in repair Moduler socket 2/3 pin 6 Amp all as specified & as directed.

S&F in repair Moduler socket 6/16 A 2/3 pin all as specified & as directed. .

S&F in repair Moduler stepped type electronic fan regulator 450 watt flush type, two module all as specified & as directed.

S&F in repair Moduler bell push, 2 modue, 10 Amp all as specified & as directed.

S&F in repair ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and as directed.

S&F in repair Modular blank plate 1 module all as specified & as directed.

S&F in repair Modular blank plate 2 module all as specified & as directed.

S&F in repair Moduler Switch , flush type single pole, two way 6 Amp, 1 module all as specified & as directed.

S&F white modular cover plate with frame 1 module all as specified & as directed. Make for Item No 50 to 64:- Crabtree(Athena)/Anchor(Roma)/Legrand(Britzy)

S&F white modular cover plate with frame 2 module all as specified & as directed.

S&F white modular cover plate with frame 3 module all as specified & as directed.

S&F white modular cover plate with frame 6 module all as specified & as directed.

S&F white modular cover plate with frame 8 module all as specified & as directed.

S&F in repair Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top complete all as specified and directed. Make : Anchor Model No : 98498 or equivalent model in Havells/ Legrand.

S&F in repair Bell ding dong, in repair, AC, 230 volts, single pole all as specified and as directed. Make: Anchor /legrand / Crabtree

S&F non-metallic PVC casing capping of size 25X12mm dia (for fixing the telephone cable and lan cable) Make : Precision/ Pressfit/ Prestoplast /Asian

S&F 20 watt LED in repair, 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Havells Model No :E-Lite LED Pride Plus Neo Cat pat NO : LHEXACP7IN1W020 /Bajaj-IVORA LED Batten 20 CDL / Philips/ Wipro/

S&F surface mounted 9/10 watts LED tube light fitting in repair, mirror light fitting with lamp and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting all as specified & as directed. Make:- Havells Model No E-lite LED Pride Plus NEO Cat pat NO : LHEXACP7IN1W010 or in equivalent model in Wipro / Philips/ Bajaj-IVORA LED Batten 10 CDL.

S&F 20 watt smart extruded aluminium LED batten high efficiency in built sensorin in repairs, 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multi stranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Bajaj No- BCLAB 20W LED PS /Havells / SHAKTI/ Wipro.

S&F in repairs decorative wall mounting fitting, working on 240 volts, 50 hz ac supply fittings comprising with stainless steel finish fixture including with opal glass diffuser and with led bulb of capacity 7 WATT all as specified and directed. Make : Havells Cat NO-LHFOAJD1YTZ1C060

S&F LED strip IP 65 non-integral flexible light 25 watt 3000 K, with high brightness by cutting required length and connecting up with driver of suitable range of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj .nxt 25W PROFFESONAL LED STRIP IP 65 WW /Havells / or equivalent model of Wipro

Supply ,fix and testing complete for LED Driver for LED Strip 25 watt connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj :- .nxt 25W LED STRIP driver IP 65 / Havells / Wipro.

S&F for wall mounted Exhaust fan metal body having 70 watt power double ball of bearing high speed of sweep size 300 mm, inbuilt bird gaurd and air delivery 600 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj BAHAR 300MM METTALIC GRAY / Havells / CROMPTON.

S&F for wall mounted Exhaust fan metal body having 70 watt power double ball of bearing high speed of sweep size 225 mm, in built bird gaurd and air delivery 600 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj BAHAR 300MM METTALIC GRAY / Havells / CROMPTON.

S&F for wall mounted Exhaust fan PLASTIC body having high speed 1325 rpm of sweep size 200 mm, inbuilt bird gaurd and air delivery 500 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj MAXIMA DXI 200MM / Havells / CROMPTON.

S&F for wall mounted Exhaust fan PLASTIC body having high speed 1325 rpm of sweep size 300 mm, in built bird gaurd and air delivery 500 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj MAXIMA DXI 300MM / Havells / CROMPTON.

S&F LED 18 Watt 3000K/6500 K ,circular type Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement complete all as directed. Make - Havells (Cat part No - LHEAAKP7IL1W018) or equivalent model of Wipro/ Philips sample as approved by GE.

S&F LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51

S&F LED 12 Watt recessed mounted circular downlighter fitting in repair, 110 Lumin per Watt, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement all as specified and directed. Make : Havells, Cat Part No : EDGEPRORDDLR12WLED840S or equivalent model of Wipro Model No LD90-141-XXX-65-XX* / Philips Model No -DN393B LED12S-6500 PSUWH / OSRAM

S&F 8 watt adjustable spot light LED New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life COB LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output along with connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement all as specified and directed. Make : Havells Uneco Adjustable Spot light Cat Part No: UNECOADJDLR8WLED830S24 or equivalent model of Wipro/ Philips

S&F in repair DB vertical type 4 way TPN in repair, doubble door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / MDS sample as approved by GE.

S&F in repair MCB TPN 100 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs all as specified and directed. Make : Havells / Legrand / Schneider / MDS sample as approved by GE.

S&F in repair sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 2 way without bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 08 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection all as specified and directed. Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair MCB SP, 240 volt, 16 to 40 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair MCB SPN, 240 volt, 40 to 63 Amps, C series, all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair for 10 watt, PDC Housing 6500 K Bulk head luminaire with opal diffuser LED, IP 65 protection working on 240 volts, 50 hz AC fittings comprising inbuilt surge protection all as specified and directed. Make: Bajaj Cat NO- BIBWP 10W LED /Havells / Wipro.

shree arihant constrution

NOEL ENGINEERS

GANGAJAL

Bidder Name

NOEL ENGINEERS

shree arihant constrution

GANGAJAL

N.S.ENTERPRISES