WBPWD/EE/CKHED/ eNIT-78/23-24 3rd call

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (KEI/ Havels/ Finolex/ Glow star) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switchfixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. (E-14/2)

a. Average run 10 mtr

b. Average run 8 mtr

c. on board

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (KEI/ Havels/ Finolex/ Glow star) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (E-14/1)

a. 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

b. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

C. 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. (F-5/9)

i) 6 sqmm

ii) 4 sqmm

iii) 2.5 sqmm

iv) 1.5 sqmm

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works. (E-16/7)

I) 20 mm SIZ

II) 25 mm SIZ

Supplying & Fixing CRC sheet metal (16 SWG) JB-cumSwitch Board of the following sizes complete with three no.suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl.bakelite/Perspex/coloured Perspex (wall matching colour) topcover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment,painting and mending good damages to building works. (E-3/10)

a) 175 mm x 100 mm x 65 mm

b) 200 mm x 150 mm x 65 mm

c) 240 mm x 200 mm x 65 mm

S & F of Copper socketing bar for switch board.

S & F 240 V, 6A plug socket (Anchor), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/ persp-ex top cover and making necy. connections with PVC wire and earth continuity wire etc. (E-5/15a)

DO- 240v, 16 Amps plug socket ---do-- do--do---do.(E-5/15b)

DO- 240v, 6 Amps Piano key type switch ---do-- do--do---do.(E-5/14a)

DO- 240v, 16 Amps Piano key type switch ---do-- do--do---do. (E-5/14,b)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-6/22)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover And making necessary connections as required. (E-7/25)

Supply & Fixing 240 V, 4 nos. 20A plug socket with separate 4 nos. 20A Piano key type switch, indicator & 16A kit-kat flush type fuse (Anchor) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-8/31)

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. (E-6/18a)

Supply & delivery of commercial type indoor mounting retrofit rail for double LED tube light fitting Philips make complete with all accessories as required. Philips-TMC - 501-P-2XT-LED-P3241.

Supply & delivery of commercial type indoor mounting retrofit rail for SINGLE LED tube light fitting Philips make complete with all accessories as required. Philips-TMC - 501-P-1XT-LED-P3241.

Supply & delivery of 240v, 18W, 2100lm, 4feet LED tube light Philips make Master LED tube 1200mm 18W-865 T8.

Supply & delivery of 240v, 30W,T8, 4000lm, 4feet LED tube light Philips make Master LED tube 1200mm 30W-865 T8.

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required. (C-2/14/D)

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. (C2/15)

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.( C-2/16)

Supply & delivery of 48", 1200mm, 230volt single phase AC ceiling fan ( Brown colour) incl.all accessories Crompton Riviera hi speed.

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages. (C-3/27)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) (D-14/29)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (C-3/21A)

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. (C-3/21 B)

S & D of 450mm, 18", 1420RPM, 230Volt, 85watt Padestal fan(EPC Make) comprising with 4nos blade, metal body, heavy duty fan complete with all accessories.

S & D of 450mm, 18", 1420RPM, 230Volt, 85watt Wall bracket fan (EPC Make) comprising with 4nos blade, metal body, heavy duty fan complete with all accessories.

Fixing the wall bracket fan into the wall by fastnuts screws etc. as per direction of EIC.

S & D of (12'' ) 1420RPM, 230Volt, 80watt (EPC Make)metal body heavy duty Exhaust fan complite with all accessories.

Fixing only 12" exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. (c-4/28)

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (c-4/30-b)

S & D of 240V, 36/40W recess mounted decorative high efficiency LED clean room luminaries of 2'x2' Crompton make Cat No- RC370B LED 30S-6500 G6 LW 60 PSU OD S6/equivalent make-philips as per approval EIC

Supply & delivery of 240v, 18W, Slim LED Recessed Ceiling downlight (Make - Wipro ) (Cat - LD95-221-XXX-65-G1, Wipros Iris Neo Nextgen is Slim LED DOWNLIGHTER, 18W) / PHILIPS

Supply & delivery of 240v, LED Driver for street light of following watages (Philips/ Crompton)

i)100watt

ii) 150watt

Supply & delivery of 10kv, Surge protection device for street light fittings (Philips/ Crompton)

Supply & delivery of 250v, 50hz,16Amp digital daily & weekly time switch (Make L &T- 67DDT0/ Equ. Legrand)

Supply & delivery of following type of power contractor of L & T Make

i) 40A DP Make L & T MNX 40-2P

ii) 25A DP Make L & T MNX 25-2P

iii) 25A Four pole Make L & T MCX 04

iv) 40A Four pole Make L & T MCX 04

Supply & delivery of 230v LED Indication lamp for existing timer DB.

Supply & delivery of the following 1.1KV grade PVC insulated FRLS stranded copper wire as below ( KEI/ Finolex/ RR/ Havells) ( 1 Coil =180mtr)

i) 6sq mm. ( K-2/73)

ii) 4sqmm. (K-2/72)

iii) 2.5sqmm. (K-2/71)

iv) 1.5sqmm. (K-2/70)

Supply & delivery of the following electrical accessories as below:-

100A(10ka) FP Isolator. (D-5/6) legrand C type

1) 40A (10KA) FP Isolator. Legrand. (d-5/6)

2) 40A (10KA) DP Isolator. Legrand. (d-5/6)

3) 63A (10KA) TP MCB. Legrand. (d-6/7)

4) 40A (10KA) FP MCB. Legrand. (d-6/7)

5) 40A (10KA) DP MCB. Legrand. (d-6/7)

6)6--32 A (10KA) SP MCB. Legrand. (d-6/7)

7) 20A , 230v, switch type SP MCB (Havells/ Legrand/Anchor)

8) 32A, Cylindrical HRC Cartridge type fuse L & T Make

9) 63A, Cylindrical HRC Cartridge type fuse L & T Make

10) 100A, Din type HRC fuse L & T Make

11) 125A, Din type HRC fuse L & T Make

12) 200A, Din type HRC fuse L & T Make

13) 250A, Din type HRC fuse L & T Make

14) 230V,16Amps Anchor make Kit-Kat Fuse . (K3-85)

15) North-West 240v, 20/25 A Modular starter. (K-3/112)

16) North-West 240v, 20/25 A Modular Socket. (K-3/111)

17) North-West 240v, 20/25 A plug top. (K-3/113)

18) 240v, 5A, 5Pin, Anchor make Socket. (K-2/82)

19) 240v, 16A, 3Pin, Anchor make Socket. (K-2/83)

20) 240v, 6A, Anchor make Piano key switch. (K-2/80)

21) 240v, 15A, Anchor make Piano key switch. (K-2/79)

22) 240v, 6A, 3Pin, Modular Socket. (K-3/103)(make Legra-Myris/arteor)

23) 240v, 16A, 3Pin, Modular Socket. (K-3/104)(make Legra-Myris/arteor)

24) 240v, 6A, 3Pin, Modular Switch. (K-3/101)(make Legra-Myris/arteor)

25) 240v, 16A, 3Pin, Modular Switch. (K-3/102)(make Legra-Myris/arteor)

26) 240v, 6A, 3Pin, Anchor make Top.

27) 240v, 20A, 3Pin, Anchor make Top. (k-3/113)

28) 240v, AC Buzzer Anchor make. (K-1/24)

29) 20/25mm Precision make PVC Rigid conduit Pipe. (E-16/7)

30) Tibcon metal body 2.25MFD Capacitor.(P2 type)

31) 240V, Step type Anchor make Fan regulator. (K-2/84)

32 3ft long heavy duty lock chain.

33) Godrez make 6liver pad lock.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

ELECTRO MECHANICAL CORPORATION (BID ID -5791888)

OVERSEAS TRADING AND SUPPLIES CORPORATION (BID ID -5791882)