WIDENING , RE-SURFACING , RE-ALIGNMENT OF EXISTING ROADS AT OLD AIR FIELD SRINAGAR

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation over areas not exceeding 1.50m deep and getting out in soft / loose soil complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with roller 8 to 12 tonne complete all as specified and directed.

M&L for soling (or sub base), 200mm thick spread thickness with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber using 8 to 12 Tonne power & vibratory roller complete all as specified and directed.

M&L 150mm thick (compacted thickness) WBM in two layers of 75mm thick each, with coarse stone aggregate (Granite, trap or Basalt) of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size) spread, watered, rolled with 8 to 12 tonne power roller & vibratory roller and consolidated to required gradient and camber complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm & depth exc 50 mm and n exc 100 mm complete all as specified and directed.

Screening road metal, chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) complete all as specified and directed.

M&L for 75mm thick (compacted thickness) WBM, with coarse stone crushed aggregate (Granite, trap or Basalt) of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size) spread, watered, rolled with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.

All as per description of item No. 9.00 here-in-before but except materials. Note:- Serviceable materials retrived vide scarifying existing road against item No. 7.00 here-in-before shall be re-used.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen (VG-30) @ 4% by weight of total mix, mixed in hot mix plant, laid by the mechanical paver over a priming/tack coat with bituminous primer (VG-10) @ 5kg per 10 sq metre applied evenly and compacted to required camber and gradient complete all as specified and directed.

M&L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat of paving bitumen (VG-10) @ 5 kg per 10 sq m, putting in premixed bituminous macadam using paving bitumen (VG-30), well rammed and sealed with paving bitumen (VG-10), with 8 to 12 Tonne power roller and vibratory roller, 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.30mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed.

M&L for preparing un-surfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/ tack coat of paving bitumen (VG-10) at the rate of 10 Kg per 10 square metre of road surface and providing 40mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% of paving bitumen binder (VG-30) by weight of total mix, mixed in hot mix plant, laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 Tonne power road roller & vibratory roller complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/ tack coat of paving bitumen (VG-10) at the rate of 5 Kg per 10 square metre of road surface and providing 40mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% of paving bitumen binder (VG-30) by weight of total mix, mixed in hot mix plant, laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 Tonne power road roller & vibratory roller complete all as specified and directed.

M&L for painting lines, dashes, arrows , letters etc on road pavements and the like exe 10cm wide using thermoplastic road marking paint with 8% glass beads applied hot using special applicator machine with heating arrangement upto 160 degree centrigade complete all as specified and directed. Note:- The painted surface shall stand out boldly and solidly without showing signs of brush marks or surface underneath. If necessary, the surface shall be re-painted untill the desired result is obtained.

M&L for continuous brick edging with burnt clay bricks, old size, sub class 'B'; with width equal to the depth of the brick, laid dry, on end vertically, embedded in ground, including necessary excavation & earthwork and temping complete all as specified and directed.

S&F ABS speed breaker / rubber rumbler, 500mm wide of size 425/350 x 50/75mm, tough, strong, weather resistant, capable to withstand weight of vehicles comprising of segments of colour Black/Yellow fixed on road surafce with zinc plated 12mm x 120mm size nails complete all as specified and directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fixing polycarbonate convex road safety mirror of 600mm dia duly plastic framed back covered and provided with holding clamp arrangement having wide field of vision, exterior weather proof, bright reflection, anti glare and easy to maintain, suitable for installing on blind curves on the wall or pole etc. including 2.00 long stand of 50mm dia, made out of 1.65mm thick steel CRC sheet with hold fast at bottom end duly embedded in PCC top end clossed with MSD sheet, exposed steel surfaces painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Manufacturing, supplying and fixing Retroreflective regulatory sign board of 900 mm dia metre, made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders etc. shall be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40mmx40mmx4 mm. The boards shall be fixed to 1 No. 50mmx50 mm square post made of M.S. angle 50mmx50mmx4mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge, complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles not exc 5 Kg each complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed.

Manufacturing, supplying and fixing of retro reflective Overhead informatory road signage and board, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet (n exc 8 sqm each) only shall be measured for payment if more than 8 sqm each shall be measured as two No.) complete all as specified and directed.

M&L for factory made pre-cast kerb stones of M-25 grade cement concrete, laid in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. Note:- Sand cushioning shall be measured and paid for separately under respective item of this schedule.

M&L for Sand filling under floors / paver blocks or in foundations including watering and consolidation complete all as specified & directed.

Excavating in trenches, in soft / loose soil, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Excavation over areas exc 1.5m deep and not exc 4.5m deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in hard / dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated materials soil to a distance not exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed.

M&L for reinforced cement concrete (RCC) M-25 Design mix using 20 mm graded crushed stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (RCC) M-25 Design mix using 20 mm graded crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for reinforced cement concrete (RCC) M-25 Design mix using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished flat surfaces of concrete, complete all as specified and directed .

Use and waste of form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for rough finished flat surfaces of concrete, complete all as specified and directed .

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for rough finished flat surfaces of concrete, complete all as specified and directed .

Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, for rough finished flat surfaces of concrete, complete all as specified and directed .

Supply and fixing Mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required inluding cranking, bending spiraly for hoops for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia complete all as specified and directed.

Supply and fixing Mild steel TMT bars, 8mm dia, cut to length, bent to shape required inluding cranking, bending spiraly for hoops for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Preparation of new or previously untreated steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia, ISI marked, single socketed in any length with rubber ring joints fixed as in weep holes, 110 mm dia complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for rendering 15mm thick on brick masonry or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Taking up or down steel tubing and connections 150mm bore, CI / DI water mains including fittings any grade, in any position with spigot and socket ends and lead joints / tyton joints and connected sluice valves / non return valves / foot valves complete all as specified and directed.

Taking up or down steel tubing and connections 100mm bore, any grade, in any position including fittings and connected gate valves / sluice valves / non return valves / foot valves complete all as specified and directed.

Taking up or down steel tubing and connections 80mm bore, any grade, in any position including fittings and connected gate valves / sluice valves / non return valves / foot valves complete all as specified and directed.

Taking up or down steel tubing and connections 50mm bore, any grade, in any position including fittings and connected gate valves / sluice valves / non return valves / foot valves complete all as specified and directed.

Taking up or down steel tubing and connections 25mm bore, any grade, in any position including fittings and connected gate valves / sluice valves / non return valves / foot valves complete all as specified and directed.

Supply, laying and jointing pipe ductile iron, spigot and socketed end including fittings class K-9, 150mm dia suitable for tyton joint including jointing material complete all as specified and directed.

Laying only ductile iron / cast iron water mains, spigot and socketed ends including fittings, 150mm dia suitable for tyton joint including jointing material complete all as specified and directed. Note : Serviceable pipe retrieved vide taking down existing pipe shall be re-used.

Taking out XLPE underground electric cable 11000 volts grade 95 sqmm 3 core from the existing trench / duct / pole etc and re-laying the same in trenches, duct, along poles or passing through roads etc. including provn of cable lugs, glands, thimble, insulation tape and connecting up with existing control gears, panels etc. as per site requirement complete all as specified and directed. Notes : Excavation, returning filling, cable protection etc shall be measured and paid separately.

Supply and laying un-reinforced precast PCC cable Cover on the cable in the trench, ISI marked, class LV, type-1, size 250mm x 150mm x 40mm (for 1100 volts LT cable) laid dry flat on sand cushioning complete all as specified and directed. Note : Sand cushioning shall be measured and paid for separately under respective item of this schedule.

Taking down old concrete / steel tubular pole 9 m / 11 m long including demolition of concrete foundation and re-fixing in new location wherever required as per site requirement, etc complete all as specified and directed. Note : Excavation/earth work, foundation concrete, preservative treatment, necessary connection, connected works, etc are deemed to be included in quoted rate.

Supply, laying, jointing and testing steel water tubing medium grade, galvanised 100 mm bore with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc) in trenches, under roads or ground etc, complete all as specified and directed.

Supply, laying, jointing and testing steel water tubing medium grade, galvanised 80 mm bore with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc) in trenches, under roads or ground etc, complete all as specified and directed.

Supply, laying, jointing and testing steel water tubing medium grade, galvanised 50 mm bore with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc) in trenches, under roads or ground etc, complete all as specified and directed.

Supply, laying, jointing and testing steel water tubing medium grade, galvanised 25 mm bore with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc) in trenches, under roads or ground etc, complete all as specified and directed.

Supply and fix cast iron sluice valve flanged ends heavy duty class PN 1.6 suitable for 150 mm (6") dia pipe including 6mm thick 2 Nos rubber insertion ring with GI nuts, bolts and washers of suitable size complete all as specified and directed.

S & F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 80mm bore complete all as specified and directed

S & F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm bore complete all as specified and directed

S & F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm bore complete all as specified and directed.

Material and labour for construction of brick valve pit of size 90cmx90cmx90cm (internal dimensions) including all excavation and earth work in any type of soil, returning filling in and disposal of soil to a distance not exceeding 50m and depositing where directed to a distance n exc 50m, PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregateas in foundation , PCC as in coping in 1:2:4 type B-1 using 20mm graded crushed stone aggregate incl necessary form work, brick masonary in cement mortar 1:4 using sub class 'B' bricks old size, rendering internally with 12mm thick cement mortar 1:4 finihsed even and fair and externally pointing flush upto GL in the same mortar as the work proceeds and 15mm thick cement plaster in cement mortar 1:4 on external surfaces above GL, valve pit cover with MS sheet cover 3.15mm thick welded to mild steel angle iron 40mmx40mmx6mm frame with handle and locking arrangement, painting all the exposed surfaces of steel with two coats of synthetic enamel paint over a coat of primer and the portion embedded in concrete with two coats of black bituminous paint complete all as specified and directed.

Material and labour for construction of brick valve pit of size 60cmx60cmx60cm (internal dimensions) including all excavation and earth work in any type of soil, returning filling in and disposal of soil to a distance not exceeding 50m and depositing where directed to a distance n exc 50m, PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregateas in foundation , PCC as in coping in 1:2:4 type B-1 using 20mm graded crushed stone aggregate incl necessary form work, brick masonary in cement mortar 1:4 using sub class 'B' bricks old size, rendering internally with 12mm thick cement mortar 1:4 finihsed even and fair and externally pointing flush upto GL in the same mortar as the work proceeds and 15mm thick cement plaster in cement mortar 1:4 on external surfaces above GL, valve pit cover with MS sheet cover 3.15mm thick welded to mild steel angle iron 40mmx40mmx6mm frame with handle and locking arrangement, painting all the exposed surfaces of steel with two coats of synthetic enamel paint over a coat of primer and the portion embedded in concrete with two coats of black bituminous paint complete all as specified and directed.

M&L for Cutting, welding and soldering existing DI/GI tubing 150mm bore for alterations or additions for inserting Tee / branch piece (Each cut measured) complete all as specified and directed. Note : Cost of Tee / branch piece including jointing shall be deemed included in unit quoted rate.

M&L for Cutting, welding and soldering existing DI/GI tubing 80mm bore for alterations or additions for inserting Tee / branch piece (Each cut measured) complete all as specified and directed. Note : Cost of Tee / branch piece including jointing shall be deemed included in unit quoted rate.

M&L for Cutting, welding and soldering existing DI/GI tubing 40mm to 50mm bore for alterations or additions for inserting Tee / branch piece (Each cut measured) complete all as specified and directed. Note : Note : Cost of Tee / branch piece including jointing shall be deemed included in unit quoted rate.

S&F for DI/GI bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, etc complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed.

Supply and fixing mild steel round bars, 10mm dia, cut to length, bent to shape required inluding cranking, bending spiraly for hoops for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Concertina coil galvanised, punched tape, 600mm to 610mm dia metre wire of short profile with HTGS spring core wire of diametre 2.50mm pitch between the barbs 24.5mm. Tape shall be 0.5mm thick hot dip galvanised upto 20 micron. Weight of each coil 7.0 Kg to 8.5 kg,. Tensile strength shall be 1600 N/sqmm (Minimum), number of spiral turns per coil shall be 50. Short baded profile of minimum blade length 11mm and width before crimping 18mm minimum including dovetailed clips @ 5 No. per 2 spiral turns approx 125 clips per coil maximum extended length of each coil is 6.00 RM complete all as specified and directed. Note :- BOO will be convened by CWE for assessmement of length of concertina coil.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire as per IS 2721 (2003) complete all as specified & directed. Note:- Supply of Chain link fencing shall be measured and paid for separately.

Supply only Chain link MS galvanisd fencing, any size or type as per IS-2721 (2003) and TD No. 1055/2011 having aperture of 100mm - 100mm and wire dia 4mm complete all as specified and directed. Note :- BOO will be convened by CWE for assessmement of weight of chain link fencing.

M&L for reinforced cement concrete (RCC) M-30 Design mix using 20 mm graded crushed stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (RCC) M-30 Design mix using 20 mm graded crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for reinforced cement concrete (RCC) M-30 Design mix using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild Steel screw bolts of size 12mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M/S GHULAM AHMAD WANI (BID ID -3142608)

M/S Rather and Sons (BID ID -3141800)

Hassan Road Construction Co Pvt Ltd (BID ID -3142517)

M/S SUHEEL CONSTRUCTIONS (BID ID -3142618)

M M SHAWL Engineers and contractors pvt ltd (BID ID -3141359)

ALCO Engineers Private Limited (BID ID -3142632)

mirco builders (BID ID -3149239)