Procurement of spares of CompAir make air compressor

AIR INTAKE FILTER ELEMENT

CYLINDER ASSEMBLY 1ST STAGE

CYLINDER ASSEMBLY 2ND STAGE

1ST STG VALVE ASSY

2ND STG VALVE ASSY

ADAPTOR

PULSATION DAMPER

BEARING HOUSING ASSEMBLY

BEARING HOUSING ASSEMBLY

WASHER

EXTENSION PIPE

WASHER TAPER

SETSCREW

SETSCREW

HOSE CLIP

BEARING OUTER, BEARING S/E

PISTON RING SET 1ST STG

PISTON RING

OIL CONTROL RING

FAN GUARD INNER

FAN 5 BLADE 25°

FAN GUARD INNER

AFTERCOOLER COIL

INTERCOOLER

COMPRESSOR OIL ONLY REAVELLITE 'S'

SUCTION VALVE - 1ST STAGE

DELIVERY VALVE - 1ST STAGE

SUCTION VALVE - 2ND STAGE

DELIVERY VALVE - 2ND STAGE

VALVE COMPLETE- 3RD STAGE

VALVE ASSY

JOINT KIT (C5408,9,9H & IND)

BREATHER / FILLER CAP

SUCTION FILTER HOUSING

OIL FILTER ASSLY

PIPE, OIL FEED

PIPE, OIL RETURN

PIPE, OIL RETURN

SUCTION REGULATOR ASSEMBLY

8000 HR MAINTENANCE KIT

OIL PUMP - 220 - 240 / 380 - 420 V,50HZ.

OIL PUMP - 380 - 415 V, 50 HZ SIEMENS M*

AFTER COOLER D110-D150

AFTERCOOLER D110-D150

OIL COOLER D110-D150

O-RING LINER 2ND STAGE

COUPLING - RUBBER SET(8PC)

OIL FILTER - WITH SWITCH

FILTER, AIR INLET D55A - D150A

INTAKE AIR FILTER

PIPE AIR FILTER INLET DRYCLON AC

MOISTURE SEPARATOR

MOISTURE SEPARATOR

SILENCER - DISCHARGE

FLEXIBLE HOSE

DIAPHRAGM THRUSTER BALANCE PISTON

DIAPHRAGM - THR.- BAL.-PISTON

FILTER - AIR LINE WITH PRESSURE R

G3/8 VACUUM GENERATOR

GAUGE PRESSURE R 1/8" 0 - 10 BAR

FLEXIBLE HOSE

O-RING

OIL FILTER & O - RINGS

RETRO FIL KIT AIR-OIL SEPA FILTER D55-D*

EDGING SEAL

G 1/4" S/C BONDED SEAL

G 3/8" S/C BONDED SEAL

JOINT - OIL RETURN

JOINT - SUCTION VALVE

SEAL - PNEUMATIC ROD

O RING 229.3 I/D X 5.7

ORIFICE PLUG 8 MM (PART OF C21325-242)

PLUG - ORIFICE 13MM (PART OF C21325-242)

O-RING 54.5 ID X 3.0

VALVE DISC

JOINT - SUCTION REGULATOR

SWITCH - AIR FILTER

O' RING VITON 85.32 ID X 3.53 S

SAFETY VALVE 3,5 BAR 11/4"

G1.1/4" S/C BONDED SEAL

O RING 15.6 X 2.4 SECT

G 1" S/C BONDED SEAL

SERVICE KIT DRYCLON NRV

EXPANSION JOINT - FLANGED

SAFETY VALVE 11,4 BAR 1"

VALVE ASSEMBLY - RELIEF 12BT

O RING - 31.6 I/D X 2.4 SECT.

ELBOW, BLOW DOWN

FLEXIBLE HOSE

G1.1/2" S/C BONDED SEAL

SPRING AA

'O' RING 39.5ID X 3 SECT.

JOINT

JOINT - HP OUT

SUCTION REGULATOR SEAL

DIAPHRAGM

JOINT - SUCTION VALVE

SUPPORT, BALL VALVE

SEAT - BYPASS

ASSEMBLY - FLEXIBLE HOSE

CONED UNION G 3/8" X G 1/2"

COUPLING - TEE

ASSEMBLY - FLEXIBLE HOSE

ASSEMBLY - FLEXIBLE HOSE

ASSEMBLY - FLEXIBLE HOSE

G 1/2" S/C BONDED SEAL

BALL VALVE K 84 - 1/2"

VALVE - BYPASS - DISC

SEAL - BONDED

CONED UNION G1" X G1"

DOUBLE FITTING 1/2" X 1/2" BRASS

FLEXIBLE HOSE

SUPPORT BY - PASS VALVE

DUMP SILENCER

FLEXIBLE OIL HOSE ASSY D55A - D150A

SPRING - SUCTION REGULATOR

HOSE 13 ND 16

FLEXIBLE HOSE

FLEXIBLE HOSE

SPRING - SUCTION REGULATOR

MOUNTING - AVM

ANTI VIBRATION MOUNT 70SHORE ZS1064997

MOUNTING - AVM

SEAL - STARTER DOOR

HOSE OIL DRAIN, ZS1076567

HOSE CLIP - STEEL WIRE

MAINTENANCE SWITCH

JOINT - OIL BREATHER TO GEARBOX

PIPE, BLUE NYLON - 10MM

IPE NIPPLE 241-1/2X1/4

If the bidder is authorized distributor (Indian/Foreign) of OEM (foreign origin) for supply to India/ ONGC then bidder to provide the details of price being charged by foreign manufacturer either on Ex-works or FOB or CFR basis, as the case may be, in its bid.

i) Prices quoted by bidder shall be firm during execution of the contract / order and not subject to variation on any account. ii) If different unit ex-works prices/packing and forwarding charges are quoted by bidder for multiple items having same manufacturer part no and item description , then the lowest unit ex-works price/packing and forwarding charges quoted will be considered for evaluation and placement of order. iii) Interchangeability certificate shall be provided by bidder wherever there is change in part numbers. iv) Bidder to quote merit rate of GST applicbale as on bid submission date. However, Concessional rate of GST shall be payable by ONGC against submission of EC. In case EC is not provided by ONGC then the merit rate of GST will be applicable. v) Option Clause: ONGC reserves the right to increase or decrease the quantity to be ordered up to 25% of tendered quantity at the time of placement of contract/PO. ONGC also reserves the right to increase the ordered quantity by up to 25% of the contracted quantity during the currency of the contract/PO at the contracted rates. Supplier shall be bound to accept such enhancement in order quantity. The Delivery Period/Completion period shall be as per contract/PO delivery period from date of such enhancement in order quantity or as mutually agreed between ONGC and supplier.