Repairs to roof, Brickwork, plastering ,false ceiling and joinery of JCO quarters and MES quarters at Mil Station Bhusawal under GE (South) Ahmednagar

Amount

Dismantling of single layer mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.

Dismantling battens for tiles, shingles etc. of any size including tilting fillets spaced exc 15 cm complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.)or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

Galvanised corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275, complete all as specified and directed.

All as per serial item No. 10 here-in-before but except sheets

Roof tiles mangalore pattern, interlocking at side joints laid dry complete all as specified and directed .

All as per serial item No.12 here-in-before but except tiles.

Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6, complete all as specified and directed.

All as per serial item No.14 here-in-before but except tiles.

Second class hard wood wrought scantling fixed in position complete all as specified and directed..

Clean sawn second class hardwood battens for tiles sectional area exc 5 Sqcm and not exc 15 Sqcm fixed at 30 cm centres complete all as specified and directed.

All as per serial item No.17 here-in-before but except batterns (using old retrieved battens).

Preparation of new wood and wood based surfaces, new of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Preparation of new wood and wood based surfaces of tiles battens any size and spacing, prepared and teated all over creosote oil (measured overall on one side only, spaces not deducted) complete all as specified and directed.

Second class hard wood boarding planned one side with edges tongued and grooved or rebated, 15 mm thick as in eaves board/ barge board etc. complete all as specified and directed.

Rolled mild steel sections as in main and cross beams, hip and jack rafters: purline where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete all as specified and directed.

Mild steel work as in wind ties for roof including securing bolts complete including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws (colour and design as approved by GE) complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws (colour and design as approved by GE ) complete all as specified and directed.

6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

6 mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/Aluminium framework with screws complete all as specified and directed.

Anodised aluminium snap grid framework for false ceiling, size of grid 605 x 605 mm complete all as specified and directed.

Preparation of new surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

15 mm thick rendering in CM 1:4 on fair faces of brick / concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

15 mm thick rendering in CM 1:4 on stone masonary surfaces or other than fair faces of brick / concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and directed.

Dismantling floor .hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.

Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed..

Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Framed work as in framed guard bars; barred iron doors and similar work con forming to Fe.290.Gde-E-165 hung as gates, including pintle hinges, stops, hand made sliding bolts etc. complete all as specified and directed.

Mild steel, plain, black sheet in wall cladding, steel gates and similar work 1 mm thick, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Taking down shutters exceeding 1 and not exc 2 Sqm each and removing from site complete all as specified & directed.

Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 40 mm thick, fixed in position complete all as specified and directed.

Mild steel butt hinges, medium weight, colled rolled, ISI marked and fixed, of size 100 mm complete all as specified and directed.

Aluminium anodised tower bolt of extruded section of 200 mm size, fixed complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type anodised 150 mm size, fixed complete all as specified and directed.

300 mm long aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new steel or iron surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M/s S.R lahoti

Bhirud Electric Stores

CHAUDHARY AND ASSOCIATES