REPAIRS TO JOINERY, PLUMBING, FLOORING AND MISC ALLIED WORKS AT 3U DET AND CGDHQ-10 UNDER GE (I) CAMPBELL BAY

Amount

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided for including removal of debries to outside MD land and disposed off all as specified and directed.

Demolition of Precast RCC cover slab and precast cement concrete block walling of any description and in any position not otherwise specifically provided for all as directed.

Taking down Chowkhats or frames with shutters of any description not exc. 1.5 sq. m each all as specified and directed.

Taking down Chowkhats or frames with shutters of any description exc. 1.5 sq. m but n exc 4sqm each all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each all as spcified and as directed

Dismantling wrought iron or mild steel work any description not otherwise provided for all as directed.

Providing precast cement concrete 1:2:4 type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for man holes/drain covers etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:6 complete all as specified and as directed.

M &L providing cement concrete type C-1, 1:3:6 (20mm graded stone agg) as in coping benching, bed plate, plinth protection including necessary form work complete all as specified and directed.

M&L for Rolled mild steel sections conforming to Fe 410 -W (Gde E- 250) as in main and cross beams, hip and jack rafters; purlins, Wind ties, Eves gutter,Flag post with pulley at the top and shear bars to the sides etc where connected to common rafters fixed with angle cleats or other connecting plates all as specified and directed.

M&L Painting steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of new surface and applying two coats of synthetic enamel paint over redoxide primer all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators , aluminium partition and aluminium ladder ,staircase, railing of any description etc with one or more rebates including joining cleats for fixing etc., complete all as specified and directed.

M&L for Pre-cast cement concrete hollow block masonry with hollow blocks, type C1 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in Cement mortar 1:4, complete all as specified and directed.

S&F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws,door side beading to air tightness etc. complete all as specified and directed.

S&F of Anodised aluminium window,sliding window and ventilator shutters glazed and gauged, side/top hung type without sash bars for aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles etc., complete all as specified and directed.

S&F of 100 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-21 all as specified and directed.

S&F of 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S & F 150mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S & F Aluminium (extruded section ) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S&F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of Ms tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. Make - Rajashree

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. Make - Rajashree

S & F flush shutters, 25 mm thick, solid core construction, with block board core and plywood face panels, commencial type on both sides all as spcified and directed.

S&F 30mm thick, 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather dged), or of veneered particle board medium density, wood parfticle board with commencial veneers ; suplied and fitted to chowkat all as specified and as directed by Engineer-in-Charge.

S&F 2nd class HW, 35mm thick glazed and skeleton shutters, open rebated and rebated and prepared to receive glass or gauge etc., without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for screwing glass / gauge etc., sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) all as specified and directed.

S&F for 2nd class HW plain, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S & F 100mm size MS hinges, medium weight, cold rolled mild steel, and fixed woodewn door shutter complete all as specified and directed.

M&L extruded aluminium alloy handles 150mm, fabricated type, anodized complete all as specified and directed.

M&L aluminium anodized barrel tower bolt of extruded section length of bolt 150mm complete all as specified and directed.

M&L aluminium anodized barrel tower bolt of extruded section length of bolt 100mm complete all as specified and directed.

S&F of 4 mm thick sheet glass, Figured glass and glazing fixed with aluminum windows all as specified and directed.

M&L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions all as specified and directed.

S&F of 5.5 mm thick Sheet Glass, ordinary quality and glazing with aluminum doors / partitions all as specified and directed.

Taking up or down steel water tubing and connection 15mm dia complete all as specified and as directed.

S&F tubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections new or old position (wall, ceiling, floors etc.,) of 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connection 20mm dia complete all as specified and as directed.

S&F tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections in new or old position (wall, ceiling floors etc.,) of 20mm bore complete all as specified and directed.

Dismantling of wall and ceiling boards( fibre,pulp,insulations etc) or insulation boards/ slabs/ blankets any thickness including cover fillets and framework of any description all as directed.

S&F of 4 mm thick designer Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework in ceilings including Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling, suspended with hangers from roof trusses and fxied to wall by aluminium T/L section with all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness in sloping roof, valley and ridges all as directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof ridges, valley covering /cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 all as specified and directed.

All as per item No 45 above but on vertical surfaces as in skirtings over 10 mm thick rendering in cement mortar 1:4 all as specified and directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6 complete all as specified:

M&L for nonskid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 all as specified and directed.

All as per item No 48 above but on vertical surfaces as in skirtings /dados over 10 mm thick rendering in cement mortar 1:4 all as specified and directed.

Dismantling of eaves boarding, any description, fixed in any position with screws frame work all as specified and directed.

S&F of 2nd class hard wood 20mm thick clean swan with butt joints planed both side as in eaves board fixed in screws etc all as specified and directed.

M&L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement, incl taking down existing plaster including racking out joints all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of chalk whiting primer complete all as specified and directed.

S & F in repairs for Stainless steel sink , made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets and connecting union to pipe, overall size 495mm x420mm bowl size 410mm x330mm x160mm all as specified and directed.

S&F curtain rod of anodised aluminium alloy fixing with brackets, stop, rollers etc all as specified and directed.

S&F in repair of angle cock/Stop valves fancy chromium plated type15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F of 15mm bore Bib taps,fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair all as specified and directed.

S&F in repair of Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, chromium plated, waste fittings ,waste pipe and all connecting items all as specified and directed.

S&F in repair of CP Pillar taps 15 mm bore fancy type, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe all as specified and directed.

S&F Chromium plated Health Faucet with tube and hook ABS faucet fixed in repair all as specified and directed

S&F in repair 10 lit capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed.

S&F in repair of PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2, (using 40 mm graded aggregate) as sub base complete all as specified and directed.

S & F Rotational moulded polye thylene water storage tanks 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including Dismantling of old water tank all as specified and directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for rain water /PVC bends including necessary fixing arrangements with and including MS clamps for support etc all as specified and directed.

S&F of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repair European type WC (Pedestal Pattern) complete inlcuding pedestal pan and trap inlcuding connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as spefcified and directed.

S&f in repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed.

S&F in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

S&F in repairs Vitreous china bowl urinals, bowl type (back or corner wall type), Size 465 x 355 x 265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing

Note : An amount of Rs 23,290.00 towards Schedule of Credit shall be deducted to arrive the Contract sum.

KCM BUILDERS & CONSTRUCTIONS (INDIA) PVT.LTD