Zone No. 1 Annual Sectional Contract for repair and maintenance work and supply of material under ADEN/LAR from JHS(Excl.) to BINA(Excl.) for the year 2026-27.

Item Breakup - 2-All items of supply CPWD-DSR-2023

Blacksmith 1st class

Mason 1st class

Portland Cement (OPC-43 Grade)

Block board construction flush door with commercial Sqm ply on both faces 30 mm thick JHANSI DIVISION-ENGG/NORTH CENTRAL RLY

Acrylic distemper 1st quality , having VOC content Kg less than 50 grams/ litre

Acrylic emulsion, having VOC content less than 50 Litre grams/ litre

Synthetic enamel paint in black or chocolate shade

Synthetic enamel paint in all shades except black or Litre chocolate shade

Water proofing cement paint

Fine sand (zone IV)

M.S. Wire nails

Bleaching powder

G.I. pipes 15 mm dia

G.I. pipes 20 mm dia

G.I. pipes 25 mm dia

Polyethylene water storage tank with cover and Per suitable locking arrangement Litre

Unplasticised P.V.C. connection pipe with brass union Each 30 cm long 15 mm bore

H.P. or L.P. ball valve with polythene floats: 15 mm Each dia

H.P. or L.P. ball valve with polythene floats: 20 mm Each dia

20 mm dia Gunmetal gate valve with wheel

Vitreous china flat back wash basin 630x450 mm

CP Brass waste 32 mm

Float glass panes of nominal thickness 4 mm (weight Sqm not less than 10 kg/sqm)

Ply wood 5 ply with commercial ply on both faces Sqm 6mm thick

12 mm commercial ply

Common burnt clay F.P.S. (non modular) bricks class 1000 designation 7.5 Nos.

C.I. sluice valve (with caps) class II : 100 mm di

Vitreous china 10 litres low level cistern without Each fittings

Galvanized wire mesh of average width of aperture Sqm 1.4 mm and nominal dia of wire 0.63 mm

Aluminium hanging floor door stopper with twin Each rubber & stopper

Hydraulic door closer tubular type Aluminium section Each body

Coloured orissa pattern W.C. pan 580 x 440 mm

Coloured Pedestal type W.C. pan 580x440 mm Each (European type)

Rectangular shape 453x357 mm Mirror with Plastic Each moulded frame

Flexible (coil shaped) PVC waste pipe for sink and Each wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings

U-PVC pipes (working pressure 4 kg / cm²) Single Metre socketed pipe 110 mm dia

C.P. Brass bibcock 15 mm

C.P. Brass stop cock (concealed) 15 mm

C.P. Brass angle valve 15 mm

3 mm thick translucent white acrylic plastic sheet

15 mm PTMT bib cock

PTMT push cock 15 mm dia

PTMT grating 100 mm dia

PTMT Pillar cock (fancy) 15 mm foam flow JHANSI DIVISION-ENGG/NORTH CENTRAL RLY

PTMT - Waste Coupling 31/32 mm

PTMT Angle Stop cock with Flange 15 mm

Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm Metre nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm Metre nominal dia Total 910713.00