R/R damages on Kupvi to Dhotali Deiya road km. 0/0 to 25/0

Providing and applying primer coat with Bitumen SS-I grade on the prepared surface of granular base including cleaning of road surface and spraying primer @ 0.90-1.2 kg / sqm using mechanical means as per technical specification clause 502. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification Grading 3 including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. By Manual Means. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing, laying and rolling of close-graded Mix seal surfacing material of 25mm thickness composed of 11.2 mm to 0.90 mm (Type-A) @ 0.338 kg/per ten square meter aggregates using penetration grade bitumen @ ie binder content @ 27.50 kg/10 sqm or 5.11% by weight and minimum density of MSS should be 2.10 gm/cc to required line,grade and level to serve as wearing course on a previously prepared base,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and gradient as level to as per Technical specification clause 509. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Road marking with applied thermoplastic compound with refectorising glass board on bituminous sueface providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectrising glass beads @ 250gms/ sqmt. Area thickness of 2.5 mm in exclusive of surface applied glass beads as per IRC 35. The finished surface to be uniform and free from streaks and holes. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.