Renovation of IEI to Kitchen cum store of BJR Hospital Car Nicobar.

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR LS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch,modular plate, suitable size G.I/PVC box and earthing the point with 1.5 sq.mm. FR LS PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 x 6 Sq.mm + 1 x 6 sq.mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Wiring for light / power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying of Prewired LED Batten lighting Fixture 20watts (Ready to Use Pack) with white acrylic cover sleek design and high efficency suitable for wall and surface mounted application similar to Bajaj Model BCLSB 20 W WH or its euiqvalent as per IS Standards approved by EIC

Supplying and fixing PVC Batten/angle Holder including connections etc. as required

Supplying of Following lamps

LED Lamp 09 Watts for Batten holders.

Supplying of AC Ceiling fan of 1200mm sweep for operation at 230v, 50HZ i/c wiring, down rod standard length (upto 30Cm) with all accessories etc as required. Make:- Havells/Bajaj/Usha / Crompton /Orient or its Equivalent to ISI as approved by EIC.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of Exaust fan 300 mm i/c protective guard with all accessories required (Make:Bajaj/Usha /Crompton/Orient.) or its equivalent as per IS Standards approved by EIC

Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc, directly on ceiling / wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhuast fan in the existing opening, including making good the damage, connection, testing, commisioning etc as required

a) upto 450 mm sweep

Supplying and fixing 3 pin 5 Amps ceiling rose on the existing junction box/wooden block including connections etc as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface / recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way,Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, double poles, 240 volts, isolater in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) 40 Amps

Supplying, Installation, testing and commissioning of ASHLOK make SEE brand safe earthing electro type-19, 50mm dia,length 2 mtrs and inner space to be filled with crystaline conductive mixture including filling up with electrodite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supplying of LED Street light 36 watts with pressure die cast housing, high performance polycarbonate optics and IP 65 ingress protection with all acessories similar to Bajaj Model No ENXT P 43L WH PO PC SD MT or its equivalent as per the above specifications

Supplying and fixing street light bracket made out of 40 mm dia. 1.0 mtr. Long 'B' class GI pipe ISI marked on the existing street light pole for mounting of LED street light fittings with suitable size collar at the top including bending the pipe to the required shape wiring with1.5 sq.mm PVC insulated copper conductor cable in medium class PVC conduit as required.