GE 874/EWS-37/2019-20

Amount

Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as specified.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in any type of soil complete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed.

Walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.

All as per Ser item No. 6 here in before but except stone ie, using serviceable stones as obtained under demolition complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and jointed as specified of random rubble walling uncourced or brought up to courses with maximum depression on face from straight edge held against the dressed surface n. exc 20 mm, complete all as specified and directed.

Brick work with subclass ‘B’ straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.

Extra for forming fair finished drain or channel 30 cm or more inner girth in cement concrete using extra cement including forms, moulds mi-tred/stopped ends etc all as specified and directed.

RCC M-25 Design Mix, (using 20mm graded crushed stone aggregates), as in foundations including raft, foundation beam, plinth beam etc, complete all as specified and directed by the Engr-in-charge

RCC M-25 Design Mix, (using 20mm graded crushed stone aggregate), as in beams, cantilevers, bressummers, lintel over 1.5 mtr span, complete all as specified and directed by the Engr-in-charge

RCC M-25 Design Mix, (using 20mm graded crushed stone aggregate), as in columns, pillars, piers, posts and struts complete all as specified and directed, complete all as specified and directed by the Engr-in-charge.

Form work to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete complete all as specified & directed.

Form work to sides and sofits of floor or roof beam, beam hanuchings, girders, bressummers, lintels, contilever, shelves including supports, overhangs etc also splay between floors and beam, complete all as specified & directed by Engineer-in- charge.

Form work to sides of pillars, posts, struts piers, columns and stanchions and similar works fair finished surface of concrete complete all as specified & directed by Engineer-in- charge.

Supply and fixing TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

All as Ser item No. 18 here-in-above, but 5 mm dia and over upto and including 10 mm dia in stirrups/spacers/binders complete all as specified and directed.

Mild steel rolled sections for roof trusses (framed) purlins crane guntries rail & fastening and heavy bracket (beam, tee, angle, channel or flat section) incl distance pieces cleats etc conforming to Fe-410W (Gde-E-250) quality complete all as specified and directed by engr-in-charge.

M&L for 16 to 20 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and diameter of bolt 16-20mm complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed

15 mm thick rendering in CM 1:4 on external surface plastering of fair faces of brick masonry or concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified.

15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry or concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified.

M&L Preparation of new plastered surface of walls including cornices plaster etc, and applying two coats of cement base paint over a coat of approved primer, complete all as specified and directed.

M&L one coat of primer with wall putty to obtain through true line and to achieve the surface smooth and applying two coat of OBD incl preparation of new plastered surfaces complete all as specified.

M & L preparation of new steel and iron surfaces over 10 cmwidth or girth not other wise described and applying two coats of synthetic enamel paint over a priming coat with red oxide complete all as specified

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile trength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified.

Pre-coated GI frame work GI perimeter channel 0.55 mm thick with two un-equal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall and screwed 600 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit and fixed with 4 mm dia GI suspenders 1.3 mtr centre to centre including 6.0mm thick E- board of size 600x600 mm as in ceiling board including two coats of oil bound distemper including primer coat on exposed surfaces , complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering, complete all as specified.

Hard core of broken stone/boulders of gauge exc 63mm but n. exc 100 mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified.

75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of floor finishing surface even without using extra cement complete all as specified and as directed.

M & L light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not less than 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed CM 1:6 over and including 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in sub base complete all as specified and directed..

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/rectangular area of each tile exc 0.11 Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM (1:6), over and including 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as specified and directed

2nd class softwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

Mild steel FI as in hold fasts and similar small articles fixed to chowkats, of size 25mm x 3mm coforming to Fe-290 Gde E-165, complete all as specified and directed.

35mm thick 2nd class soft wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers supplyed and fitted with chowkats, complete all as specified and directed.

30mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (divided into square with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete, all as specified.

S&F Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.

Alumimium anodised barrel tower bolt, 150mm long of extruded section and fixed complete all as specified.

M&L Machine cut kota stone as in cill of window 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Steel windows with side hung shuttesrs including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

M&L Framed work such as grills , guard bars with ends of bars shouldered and/or riveted/welded etc conforming to Fe 290 Gde E-165 complete all as specified.

S & F Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring jointed, laid in floor/walls/trenches as soil pipe(vent pipe), fixed, complete all as specified and directed.

PVC (SWR) gully trap of 125/100mm, setting & jointing with solvent cement fixed, complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches or in floor/walls as soil pipe, fixed, complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore, complete all as specified.

PVC (SWR) WC connector with lip ring 110mm bore, complete all as specified.

PVC (SWR) reducer 110/75mm bore, fixed, complete all as specified.

PVC (SWR) vent cowl for 75mm dia fixed in repair, all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm, complete all as specified.

PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed, complete all as specified.

S&F Steel water tubing 15mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified.

S&F Steel water tubing 20mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified.

Lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh, and covered with 0.01mm aluminium foil, complete all as specified.

Lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh, and covered with 0.01mm aluminium foil, complete all as specified.

S & F European WC china ware with cistern single piece WC, size 840x390x720mm, trap distance S-300mm/ 180 mm complete all as specified. Make:- Jaquar cat Part No. VGS-WHT-0207/VGS-WST-0207P or equivalent make as per Appx E of particular specifications.

Health faucet with 1 mtr long easy flex tube in chrome finish and wall hook all as specified and directed Make:- Jaquar cat Part No. ALD-CHR-585 or equivalent make as approved by GE

Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, and fixed, complete all as specified and directed.

M&L for Vitreous china wash basin pedestal type, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste pipe complete.

15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule and fixed complete, all as specified & directed

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Harrison rails (Curtain rails) mild steel, Chromium plated with fixing brackets, stops, rollers etc complete all as specified

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 15mm dia

Soap dish, vitreous China white, approximate size 160x 160x90mm

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F Extruded Aluminium alloy handles, fabricated type anodised 150mm long, complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 200mm long.

Two coat of synthetic enamel paint over a coat of pink primer on new wooden or plywood surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

S&F MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete

75mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, joints filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

S&F15mm bore stop valve, fancy type, chromium plated screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified.

S&F Brass chromium plated shower rose 125mm size

S&F coloured Toilet paper holder, vitreous China, box type fixed to wall with chromium plated CP brass screw complete

M & L for second class soft wood as in scantling clean sawn fixed in position complete all as specified.

M&L Prelaminated particle board 25mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. complete all as specified.

M & L for second class soft wood plain fillets exc 3 and nexc 6 sqcm square, wrought rectangular, triangular, in section, clean sawn, secured with nails complete all as specified.

S & F Continuous (piano) hinges 40mm width of flaps (when open) mild steel, bright finish or electrogalvanised complete all as specified by Engr-in-charge.

S&F Hasp and staple, safety type125mm long, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F rendering 15 mm thick on external stone masonry or surface other than fair face of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified.

M&L for cement concrete bed (1:3:6) type C2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested.

Supply and fixing salt glazed stone ware drain pipes, of grade'A', laid in trenches and jointed as specified 150mm bore pipe.

M&L PCC 1:2:4 type B-1 (20mm graded crushed stone aggregates) for coping, including weathering slightly rounded or chamfered using form work (straight or curved) and finishing exposed surfaces complete all as spd in relevent caluse of SSR Part-I.

Supply only integral water proofing compound.

TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia, complete all as specified

Construction of soakage well of size 1.8 m internal dia x 3m effective depth, excavation in any type of soil, foundation in PCC 1:3:6 type C1, as in footing, wall of honey combed/ solid masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as specified and shown in Drg No. CESZ/TD- 01/2015 Sh 3/3 dated 22/2/15 & revised on 06/06/15.

Construction of 10 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-1/2015 Sheet No 1/3 and 2/3 dt 22/02/2015 revised dt 21/03/2015.

M&L 75 mm thick PCC type D2 1:4:8 (40 mm graded crushed stone aggregates as in sub base of hard standing all as specified and directed by Engr-in-Charge

M&L 50mm consolidated thick sand cushion under paving block including watering and consolidation for interlocking tiles all as specified.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L PCC 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified (20mm graded crushed stone aggregates), including weathering slightly rounded or chamfered using form work (straight or curved) and finishing the exposed surfaces complete all as spd in relevent caluse of SSR Part-I.

Cutting of existing steel tubing for alteration or additions and insertion of Tee 40x40x25 mm , union , socket all as specified and as directed.

S&F Steel water tubing 25 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified.

S&F 40mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe or brass ferrule fixed, complete all as specified.

S&F 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe or brass ferrule fixed,complete all as specified.

Rotational moulded polyethylene water storage tank tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug, complete all as specified and directed.

Construction of brick masonry staging for over head water tank 2.4m height from ground level including necessary earth work in any type of soil complete all as shown on drawing No. CESZ/TD-1101/2011 Sheet 1/1 dt 01/12/2011 and complete all as specified and directed.

Point wiring for one light point/fan point/socket controlled by one switch with 1.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi stranded flexible cable as earth lead (using colour coding) in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/fan point/socket including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the distrubed surfaces to match with the existing specification complete all as specified.

Point wiring for 3 pin socket outlet 5 Amps on same board controlled by one switch with 1.5 sqmm FRLS insulted un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm FRLS insulted un-sheathed copper conductor single core multi stranded flexible cable as earth lead (using colour coding) in and including cable 1100 volts grade including casing and capping (ISI marked) including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the distrubed surfaces to match with the existing specification complete all as specified.

Point wiring for 3 pin socket outlet 15 Amps on the independent board controlled by one switch with 4.00 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core cable (using colour coding) as earth lead in and including non metalic PVC capping casing meduim grade with all fittings (ISI marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engineer in charge including 3mm thick plastic laminated top sheet cover,, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.

Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including 9 watt LED bulb complete all as specified and directed.

S&F for decorative LED battens for surface and pendent applications , anodized extruded aluminium housing and integrated electric driver high lumen out pot luminaries ( 4 FT ) of 20 W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells Cat part No.LUMILINEPLUSBS20WLED865SPCSS or equivalent makes of Bajaj/ Crompton/Philips/Syska.

Supply and fix LED light fittings 1X9W bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 volt 50 HZ make Havells, Bajaj, Phillips, Syska complete all as specified.

S&F Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Ceiling rose, surface backelite 65x50mm two or three terminals complete all as specified.

Socket outlet 2 in 1, 3 pin, 5A, flush type universal, all as specified and as directed.

S & F Switch Socket combination 2 in 1, 5 pin and 5 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

S & F Switch Socket combination 2 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

S&F Rectangular wooden boards/blocks 30x25x4cm depth closed recessed, complete all as specifed and directed.

Sheet metal enclosures factory made, (Double door) for DBs, single pole and neutral, 240 volts, 8 ways with 200Amp rated busbar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging and testing complete all as specified and directed.

S&F MCB single pole and neutral, 240 volts 6 to 40 Amps all as specified and as directed by Engr -in-Charge.

S&F MCB single pole 240 volts 6 to 32 Amps all as specified and as directed by Engr -in-Charge.

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10Sqmm, complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 as in earthing pit, CI pit cover 5.5mm thick, common salt, charcoal etc complete all as specified.

Exhaust fan plastic 450mm sweep with louvers 240 volt single phase including PVC flexible wire connecting to ceiling rose including making hole, groting nuts & bolts and plastering & making good the disturbed surface complete all as specified. Make : Havells model No .TURBO force SP or equivalent in makes as spd in particular specifications.

M/S MOHAMMAD JAMAL WANI