Providing syntex tank and motor arrangements for the well in ward no 48 in Sivakasi City Municipal Corporation

Amount

Supply and delivery of PVC and GI Specials as Per Standard Specification Asper TWAD P.No. 37 (5.1B)

a) 6" Dia PVC Pipe

b) 6" Dia Cowl

d) 32 mm G.I. Pipe

e) 20 mm G.I. Pipe

f) 15 mm G.I. Pipe

g) 1" G.I. Elbow

h) ½" G.I. Elbow

i) ½" M.S. Union

j) 1" G.I. Union

k) ½" G.I. Union

l) 1" G.I. Hex Piple

m) ½" G.I. Hex Nipple

n) 1" G.I. Coupling

o) 1" G.I. Tee

p) 1" Ball Valve

q) ½" Coupler

r) ¾" G.I. Elbow

s) ¾" x ½" G.I. Elbow

t) ½" Ball Valve

u) ½" G.I. Bend

w) 32 mm HDPE Hose

Supply and delivery and fixing of 1000 Liter HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers b Hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil complete etc..,

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain cement concrete 1:4:8 (One cement four sand and eight aggregate) using 40mmH.B.G.metal for foundation and flooring including dewatering if 'necessary and laid inlayer of not more than 15 cm thick complying with standard specification.

Brick work in cement mortar 1:5 (One cement and Five sand) using country bricks of size 8 ¾" x 4¼"x2¼ " including cost and conveyance of allmaterials to site and all other labour charges and incidential charges etc., complete complying with standards specifications.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and run of 4.0 sq.mm PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE The above cable should be adopted for Bore well submersible pumpsets only

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Supply and fixing of 15 A arial fuse unit on suitable MS plate with hylem sheet on thetapping pole with necessary clamps. only.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator)

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days..

PANDIMURUGAN S (BID ID -1440722)