SPECIAL REPAIR TO BLDG NOS. P/145 AND C/1/138 AT PANAGARH MIL STN UNDER GE PANAGARH

Amount

B/R PORTION

Excavating in trenches, not exc. 1.5 mtr wide and not exc. 1.5 mtr depth for cesspits, manholes etc. and getting out soft/loose soil even in foul position complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Demolition of brick work built in cement mortar for cracked wall of manholes, septic tank,soak pits etc. in foul position complete all as specified and as directed.

Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:4 for cracked wall of manholes,septic tank, soak pita etc. in foul position complete all as specified and as directed.

All as per item No 5 here-in -above but except bricks complete all as specified and as directed. Note : Old serivceable bricks obtained from Srl No 5 shall be reused after proper cleaning.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in trench filling and mass concrete for bottom of Drain complete all as specified and directed.

Cutting into existing manholes for pipe connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & as direcetd.

Demolition of reinforced cement concerte as in cover slabs of manholes or septic tanks, soak pits etc. complete all as specified and as directed.

M&L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and as directed.

Providng cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in copings, kneelers, apex stone, bed plates and all other similar works including necessary form work complete all as specified and as directed.

Demolition and breaking up 150 mm dia drain pipes in foul position sewage pipes set in cement mortar complete all as specified and as directed.

Supplying and laying of 160mm dia UPVC drainage sewer system pipe bearing 160 mm dia minimum 4mm wall thickness including jointing with couplar ,bend tee as per site requerement complete laid in trenches or floors complete all as specified and as directed.

M&L for concrete bed to 160 mm dia drain pipes including packing under, haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc. Complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and as direcetd..

S&F for mild steel work in nosing to steps, rungs including bedding in concreting etc and all other similar works CONFORMING TO Fe 290 Gde E-165 complete all as specified and as directed.

Cleaning of existing manhole of any size of depth of manhole exc 3.00 but n exc 4.50 mtr by bailing out water/sewage by mechanical pump or manually including mouth of sewage line and removing the deposited residual sludge/debries to a distance not exc. 50 mtr and buried in the ground complete all as specified and as direcetd.

Demolition of RCC ( other then ground floor )chajjas similar suspended work.and removing unserviceable material exc 100 mtr complete all as specified and as direcetd.

M&L Reinforcement cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) for Chajjas complete as specified and as directed.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as direcetd.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

S&F multi shutter turn windows are made out of upvc multi cavity frames sections of 60x60x2.5 mm suitable reinforced and double multi shutters division are made by shash mullion having 50x85x2.5mm multi cavity upvc section suitable reinforced with GI and shutters are made out of 50x85x2.5mm upvc section reinforced and welded in corners with EPDM gaskets provision for glass and for air tight at frames and outer side of shutter with single glaze window shutters and using suitable glass bead with perfect hardware like hinges handles stays etc complete,mosquito mesh shutter is made out of upvc extruded section of 61x27x2mm with GI chanel of 1.2mm thick welded in corners mosquito net of fiber is fitted in shutter with proper required accessories lick hingis MS grill of 12 mm round pipe are inserted in main frame & screwed by hidden screwing system with powder coating etc complete all as specified and as direcetd.

S&F providing solid PVC double door frame (choukhat) of size 120mmx50mm with thickness of 5mm made out of extruded 5mm thk pvc sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos heat moulded pvc section the inside section of size 110x30mm shall be made from plain colour pvc sheet of 5mm thk,the inside section will be covered with 5 mm thick pvc sheet c shape covered section of size 120mmx35mm.at center top position 15mm thick &50mm wide pattern section should be pasted with solvent cement adhesive to make double pattam of frame.all as specified as directed.

S&F Providing internal(prelam) single door frame of size 100mm x 45 mm with a wall thickness of 5 mm,made out of extruded 5 mm thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos heat bent PVC sheet sections.the inside section of size 90 x 30 mm shall be made from plain colour PVC sheet.the frame shall be mitre cut at two corners and joined with 4 nos of 150mm long brackets of 15mm x 15 mm MS squre tube.the two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 gauge through out the frame.the door frame shall be fixed to the wall using 8/100mm long MS screws through the frame by using anchor fastners.a minimum of 4 nos of screws to be provided for rach vertical member & minimum 2 nos for horizontal member etc complete as per manufacturer specification and direction of Engr-in-Charge.

S&F providing 30mm thick factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top bottom & lock rail MS frame shall have a coat of metal primer of approved make & manufacturer.the inside panel shall consist of 20mm thick multichamber hollow pvc section of 1mm wall thk bounded using solvent cement /cynoacrylate adhesive with 5mm thk moulded pvc sheet manufactured by an ISO 9001-2008 certified company complete all as specified and as direcetd.

S&F Providing 30mm thick factory made wire mesh solid pvc door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stiles and 15mmx15mm for top lock&bottom rails MS frame shall have a coat of metal primer of approved make and manufacturer 19mmx19mm MS squre tubes shall be covered with heat moulded plain sheet c channel made from 5mm thick pvc sheet manufactured by an ISO 9001 2008certified company complete all as specified and as direcetd.

S&F Louward windows are made out of frames section 60X60X2.5mm multi cavity section suitably suitably reinforced by GI and welded in corners and glass can be fixed on aluminum louward blades.complete all as specified and as directed.

S&F steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

M&L 5.5 mm thk froested Sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 40mm thick Solid PVC Sandwich Panel with both side 2mm single side prelam PVC sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed..

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & as directed.

M&L Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&LSand filling under floors or in foundations including watering and consolidation levelled in layers, complete all as specified and as direcetd.

M&L PCC (1:3:6) type C-2 (using 40mm graded aggregate),75 mm thick as sub base in flooring finished fair and even without using extra cement complete all as specified and as directed.

M&LPCC (1:2:4) type B-1 (using 20mm graded aggregate), 75 mm thick as in flooring finished fair and even using extra cement complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and as directed.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw and washer in roof, wall etc complete all as specified and as directed.

S&F 0.50 mm thick pre- painted galvalume aluminium zinc coating GI based corrugeted steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering / cladding to wall fixed with self tapping screws complete specified and as directed.

M&L Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd..

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as direcetd. Note : Form work required for this item included in the unit rate quoted of this item.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L Vitrified Ceramic dark shade tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

M&L Non - skid white/colour Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

M&L Non - skid white/colour Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge

M&L for 10 mm thick plastering in cement mortar 1:4 for laying wall tiles finishes complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge

M&L 12-14 mm thick green marble/tiles machine cut pre polished (not less then 1.5 sqm in each piece) jointed with cement and pointed in white cement with pigment to match incl moulding the edges and making hole for gas pipe complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on other than fair face of brick work surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth without using extra cement complete all as specified and as direcetd. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).

M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, shelves etc. finished even and smooth with out using extra cement complete all as specified and as direcetd.

Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement sturry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and as direcetd. Note : Rate for form work if reqd to be incl in the rate quaoted of this item.

Preparation of surfaces new plastered surfaces & applying two coat of oil bound distemper over a coat of alkali resistant priming paint over one coat of putty minimum 3 mm thick on ceiling complete all as specified as directed.

Preparation of old plastered surfaces complete Removal existing finishes including filling of small holes etc. and applying two coat of white wash on ceiling complete all as specified and as direcetd.

Preparation of new plastered wall surfaces & applying two coats of oil emulsion over a coat of alkali resistant priming on over one coat of putty minimum 3 mm thick on plastered surface preparatory to oil emulsion complete all as specified and as direcetd.

Preparation of old wall surfaces complete Removal existing finishes including filling of small holes etc and applying two coat of oil bound distemper over a coat of alkali resistant priming paint over one coat of putty minimum 3 mm thick complete all as specified as directed.

Preparation of new plastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified as directed.

Preparation of old plastered surface of wall complete Removal of existing finishes including filling of small holes etc. and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified as directed.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxid zinc crome primer complete all as specified and as directed.

M&L preparation of old steel surface exc 10cm width or girth and applying one coats of synthetic enamel paints complete all as specified and as directed.

M & L for preparation of old wood or wood based surface and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and as directed.

S&F in repair Vitreous china Water closet (Squatt pattern) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including connection to GI pipe line complete all as specified and as directed.

Supply & Fix CP health faucet with 1.50 mtr long tube & hook complete all as specified and as directed.

S&F PVC (SWR) P trap 100/110 mm bore complete all as specified and as directed.

S&F PVC (SWR) Q trap 110/110 mm bore complete all as specified and as directed.

S&F in repair Vitreous China valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve,float and handle including brackets flushing cistern 10 ltrs capacity complete all as specified and as directed.

S&F in repair Flush pipe of chromium plated brass tube,32mm dia, for low level cisterns complete all as specified as directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified as directed.

S&F in repair vitreous china wash basin white,flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site and all as directed by Engr-in- charge.

S & F in repair pillar tap 15 mm dia cast copperalloy fency tpye with capstan heads chromium pleted shanks and fly nuts screwed for iron pipe fixed complete all as specified and as directed.

S & F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 900x600mm fixed with steel fastners or steel screw complete all as specified as directed.

S&F swan neck bib cock cast copper alloy with capstan head, chromium plated fency type, with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore complete all as specified and as directed.

S&F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and as directed.

S&F in repair Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed..

S&F in repair fency type stop valve/angle valve cast copper chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail complete all as specified and as directed..

S&F in repair tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and as directed.

S&F in repair Chromium plated toilet paper holder fixed to wall with CP brass screwes complete all as specified and as directed.

S & F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and as directed.

S&F in repair stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and as directed.

S&F in repair stainless steel gratings of outer frame dia 150 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement complete all as specified and as directed.

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed.

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Fixing only 15 mm dia old galvanized pipes incl new fittings where necessary fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Fixing only 20 mm dia old galvanized pipes incl new fittings where necessary fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F rotational moulded polythylene water storage tanks of 1000 ltr capacity (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete, all as specified and as directed.

Cutting chases for concealed water tubing or concealed conduit & making good in CM 1.3 of girth exe 10 cm and n.exe 20 cm in brick wall complete all as specified and as directed.

PCC 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregate as in plinth protection complete all as specified and as directed.

M & L for providing pre-cast cement concrete 1:2:4 type B-1(20 mm gradded agg) for cover slab, manholes etc set in CM 1:4 complete all as specified and as directed.

M&L Mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc.complete all as specified and as directed.

Ditto as item No 102 above but 5 to 8 mm dia and over in stirrups, spacers and binders complete all as specified and as directed.

Taking out the root of trees/stirrups of any girth from the surface of bldgs and making good the damaged portion to match with the existing surface in CM (1:3) or with PCC (1:2:4) or BB work in CM (1:6) and finally finishing the surface to match with the existing surfaces complete all as specified and as directed.

Taking down CI/AC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and as directed.

Taking down CI/AC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and as directed.

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and as directed. Make : Supreme/ Finolex.

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and as directed.

S&F PVC SWR bends of 110 mm bore complete all as specified and as directed.

S&F PVC SWR bends of 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) junction double (double T) equal or unequal provided with access door of 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) reducer of 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) WC connector with lip ring 110 mm complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B-1 using 20 mm stone aggregated at roof including water proofing compound (WPC paid and measured separetely) complete all as specified and as directed.

Supply only liquid water proofing compound (Make: Pidilite LW as per manufacturer instruction) complete all as specified and as directed.

M&L (a) 1st Layer : (Grading with cement concrete) : 50 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate for grading in roof all as per Para 11.42.2 of SSR Part –I 2009 including rendering 5mm thick over the cement concrete surfaces in CM (1:4) mixed with water proofing compound complete all as specified and directed. (b) 2nd Layer : (Application of Primer) : Priming the surface with a mixture of Shali Urethane (R) BTD of STP make (or primer of equivalent make: PEDILITE (DR FIXIT)/ FOSROC/ CICO/ SIKA) and potable water in the ratio of 1:1 i.e. (200 grm primer & 200ml water) and apply @ 400grm/sqm of the mixture and allow to touch dry shall be applied on the prepared surfaces complete all as specified and as directed. (c) 3rd Layer : Applying one coat of ShaliUrethane (R) BTD of STP make (or primer of equivalent make: PEDILITE (DR FIXIT)/ FOSROC/ CICO/ SIKA) @ 1 Kg/Sqm by roller/airless spray while the primed surface is takly and spread fiber glass net of 45 gms with overlaps of 50mm in both directions when the surface is still tackly and applying second coat of ShaliUrethane (R) BTD of STP make (or primer of equivalent make: PEDILITE (DR FIXIT)/ FOSROC/ CICO/ SIKA) @ 1 Kg/Sqm by roller/airless spray as final coating complete all as specified and directed. (Note: (i) Unit rate shall deemed to be included complete roof treatment process i.e. all three layers. (ii) WPC will be measured and paid seperately.)

M&L 15 mm thk plaster in CM 1:4 with integral water proofing compound ( WPC paid and measured separetely) both on floor and wall. Then apply Epoxy Resin coating all as per manufactur's instruction as in sunken floor slab complete all as specified and as directed.

S & F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright polished complete all as specified and as directed.

S & F 30 mm width of flaps (when open) continuous (piano) hinges mild steel bright finish of electrogalvanised complete all as specified and as directed.

S&F aluminium anodised barral tower bolts 200 mm long, of extruded section and fixed stove enamelled black with bright bolt complete all as specified and as directed.

S& F aluminium alloy anodied sliding door bolt size 250mm with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrueded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 125 mm aluminium handle cast type anodized complete all as specified and as directed.

S & F 100 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F stain less steel butt hinges of size 100 mm for PVC door complete all as specified and as directed.

S&F Aluminium tower bolt of size 150 mm for PVC door complete all as specified and as directed.

S&F Aluminium Bow handle of size 150 mm for PVC door complete all as specified and as directed.

M & L for brickwork with old size subclass 'B' bricks, (except bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in CM 1:4 complete all as specified and as directed.

M&L 15 mm thick Rendering in CM 1:6 on fair faces of brick/concrete work surfaces including taking down cement plaster of any description of brick wall surfaces complete all as specified and as directed..

M&L 15 mm thick Rendering in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without using extra cement and using water proofing compound @ 3% by weight of cement content complete all as specified and as directed. Note :- WPC will measuered and paid separately under relevant item of schedule.

M&L 15 mm thick Rendering in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound @ 3% by weight of cement content including taking down cement plaster of any description of brick wall surfaces complete all as specified and as directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.

M&L formwork to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200mm thick (horizontal or sloping) for fair finish surfaces complete all as specified and as directed.

M&L forming construction joint 30mm deep X 10mm wide with sealing compound grade A complete all as specified and as directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening complete all as specified and as directed.

S&F Factory made solid panel PVC shutter 30 mm thick ( style ) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for style and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rail with suitable PVC sheets beading and jointed together with solvent cement as in frame at site as per specification and drawing in SSR part-II complete all as specified and as directed.

M&L 2nd class hard wood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and as directed.

S&F Factory made 35 mm thick 2nd H.W plain framed panelled shutters (two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and as directed.

S&F butt hinges, extruded alluminium,with mild steel hinge pin,bright polished and fixed, type 75 mm size C21 complete all as specified and as directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and as directed.

S&F 125 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as dirceted.

S&F small fittings 2nd class hard wood such as brackets of any type latch and hinge block shaped door and window stops and the like of 1st class hard wood including all necessary labour articles n. exc 200 cucm each complete all as specified and as directed.

S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and sollar plates complete all as specified and as directed.

S&F as steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and as directed.

M&L sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane complete all as specified and as directed.

S & F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and as directed.

M&L coloured Virified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry all as specified as directed.including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

All as per item No 161 above but 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L Non - skid colour joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed.including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying wall tiles finishes. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

M&L Non - skid colour joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed.including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying wall tiles finishes. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

M&L Glazed coloured joint free ceramic tiles in vertical surface size 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified as directed.including rendering 10 mm thick in cement moters 1:4 . Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

S&F Vitreous china squatting pan,'Orissa'pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipe complete all as specified and as directed.

M&L 20 mm thick black granite Machine cut jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F PVC connection 15 mm dia of bore and 600 mm long including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and as directed.

S&F Bib tap with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed.

S&F stop valve/angle valve cast copper chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

S&F tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and as directed.

S & F brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and as directed.

S&F stainless steel gratings of outer frame dia 150 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement complete all as specified and as directed.

S & F in repair PVC waste pipe 32 mm dia for WHB/sink of length 750 mm complete all as specified and as directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460mm x 203 mm bowl size 410mm x 330mm x 160 mm complete all as specified and as directed.

S & F stock clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts securing ends of stays to wall or roof bore of pipe 75 mm complete all as specified and as directed.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and as directed.

S & F for GI frame work seamless ceilling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall useing nylon sleeves and screws at 450 mm centre to centre/intermediate channel o.9 mm thick two equal flanges of 15 mm each and web of 45 mm seuspended from soffit at approx 900 mm C to C with GI cleat and steel expansion fasteners with and including cilling section ( not exc 1.2 m length ) of 0.55 mm thicknes having kurled web of 50 mm and flang of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457 mm C to C complete all as specified and as directed.

M&L non asbestos fibre cement building boards 6 mm thick fixed to celling flat complete all as specified and as directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.

S&F in repair MS.PVC coated drepery rods of 25 mm dia of PVC coated in curtain rods complete all as specified and as directed.

S & F MS PVC sheeted/power coated bracket size 150mm made to shape suitable for holding curtain/drapery of rod of 25mm dia fixed with PVC rawl plugs and MS steel screws complete all as directed by Engr-in-Charge and as per approved sample kept in AGE B/R 1 office for single/double rod system.

S & F for coloured conical end balls dia not less than 50mm and PVC coated made to shape suitable for fixing as end of curtain/dropery rods complete all as directed Engr-in-Charge and as per approved sample kept in AGE B/R 1 Office.

Dismantling of Asbestos cement ( corrugated, semi corrugated, etc.) sheet in roof covering complete all as specified and as directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling Timber scantling 40 sq.cm and over in section , in any position (unframed work) complete all as specified and as directed.

M&L clean sawn second class hardwood in scantlings, (timber fixed) complete all as specified and as directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

M&L cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed complete all as specified and as directed.

Supplying and laying of Supreme Eco drain Hi-tech pipe dranage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with couplar ,bend tee as per site requirement complete laid in trenches or floors complete all as specified and as directed.(Make : Supreme).

All as per item No 192 above but 200 mm dia pipe laid and jointed complete with couplar complete all as specified and as directed.

M&L for concrete bed to 200 mm dia drain pipes including packing under, haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and as directed.

All as per item No.194 above but internal dia of pipe 150 mm complete all as specified and as directed.

S&F Vitreous China urinals,half stall type white ( wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

E/M PORTION

Taking down carefully copper/aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and as directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and as directed.

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed.

Material and labour wiring for socket out let on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed.

All as per item No.2.004 above but 5 Amp socket on same board with other switches complete all as specified and as directed.

All as per Item No 2.004 above mentioned here-in- before but for one light point controlled by two -2 way switches complete all as specified and as directed.

Material and labour wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc.complete all as specified and as directed.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified and as directed.

Supply and fixed switch socket 2 in 1 multipurpose 5 pin , (6 Amps ) complete all as specified and as directed.

Supply and fixed Socket outlet 3 pin, 5A, flush type complete all as specified and as directed.

Supply and fixed switch 16 Amps flush type controlled by one switch complete all as specified and as directed.

Supply and fixed socket 2 in 1 , 6 pin , (16 Amps ) complete all as specified and as directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and as directed.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and as directed.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified and as directed.

Supply & fixed LED bulb 7 watts, 240 volts, ISI marked complete all as specified and as directed.

Supply & fixed Bell push , flush type , 5 amp complete all as specified and as directed.

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 voltscomplete all as specified and as directed.

Supply & fixing exhaust ventilation fan of sweep 230mm,240 volts, metalic body, BEE 5 star rated, ISI marked complete all as directed by Engr-in-Charge.

Supply & fixing GI pipe light grade 40 mm dia of size for road cross of cable,ISI marked complete all as specified and as directed.

Supply & fixing XLPE insulated armoured cable, 25 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply and laying for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. Note : Punned thickness shall be measured.

M&L sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed.

Supplying and fixing two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 2.5 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and as directed.

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and as directed.

Supply & fixed 01x 18 W LED batten light fittings, with T-8 tube, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and as directed.

Supply and fixed security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed. Make - Bajaj/Crompton/Phillips

Supply and fixed 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and as directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and as directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door, vertical type (when MCBs to be used), Triple pole and neutral 415 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and as directed.

Supply and fixed MCCB TPN 125 Amps, 'C' series 10kA, 240 Volts,ISI marked and to be housed in DBs complete including necessry connection complete all as specified and as directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and as directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and as directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and as directed and testing on completion. Note : If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply & fixing recess cum surface light round shape, 240v, ISI mark, 18 watts complete all as specified and as directed. Make : Havells

Supply and fixing MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and as directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Suply & fixing crown shaped post top lanternmade of polycarbonate, sutable upto 20 Watts LED lamp, ISI mark, 240 V complete all as specified and as directed.

Supply & fixing XLPE insulated armoured cable, 6 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and as directed.

Suuply & fixing junction box suitable for 10 Apms MCB,ISI mark, 240 V complete all as specified and as directed.

S&F in repair rotational moulded polythylene water storage tanks of 500 ltr capacity (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete, all as specified and as directed.

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25mm dia with fly nut complete all as specified and as directed.

M&L for 25mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for iron pipe complete all as directed.

M&L 25 mm bore GI tubing medium grade in Trenches/floor/pillar and connection including fitting like socket/union/tee/reducer nipple etc complete required will be supplied by contractor rate for the same is included in the item rate quoted complete all as specified and as directed.

Cutting existing steel tubing for alteration or additions (each cut measured) 25 mm bore complete all as specified and as directed.

SCHEDULE OF CREDIT

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

Anmol Yash S.D. Construction Pvt. Ltd.

M/S AJIT KUMAR KONAR AND SUBHAS CHANDRA KONAR