Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.7 LAccepted-Finance | ₹6.7 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹6.7 L+₹5,016.41 (0.75%)Accepted-Finance VALLUVAR NAGAR BAMBOOFLAT SOUTH ANDAMAN | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | ₹6.7 L+₹5,016.41 (0.75%) | L2 | Accepted-Finance Accepted |
| 3 | L3₹7.6 L+₹97,120.92 (14.5%)Accepted-Finance | ₹7.6 L+₹97,120.92 (14.5%) | L3 | Accepted-Finance Accepted |
Tender Value
₹8.2 L
EMD Value
₹16,447
Closing Date
20 Aug 2026, 3:00 pmClosed
Executive Engineer, RCD, APWD, Wimberlygunj
Executive Engineer, RCD, APWD, Wimberlygunj
Minor repair of PMSHRI School Bambooflat girls toilet under Bambooflat Sub Division RCD APWD Wimberlygunj
2026_APWD_24200_1
NIT No. 21/EE/RCD/APWD/WG/26-27
Open Tender
Civil Works - Buildings
Percentage
180 days
RCD, APWD, Wimberlygunj
Please refer to tender document
8 documents required · 8 mandatory
₹0
₹16,447
15 Sept 2026
12 Aug 2026
21 Aug 2026
12 Aug 2026
20 Aug 2026
12 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | 20 | metre | 619.25 | ₹12,385 |
| 2Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | |||||
| 2.1 | 30 mm thick plain PVC door shutters | 6 | sqm | 3,829.6 | ₹22,977.6 |
| 3 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | 7.2 | sqm | 1,784.7 | ₹12,849.84 |
| 4Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | |||||
| 4.1 | 75 mm diameter | 150 | metre | 307.4 | ₹46,110 |
| 4.2 | 110 mm diameter | 180 | metre | 490.8 | ₹88,344 |
| 5Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. | |||||
| 5.1 | Single tee with door (i) 75x75x75 mm | 30 | each | 159.4 | ₹4,782 |
| 5.2 | Single tee with door (ii) 110x110x110 mm | 30 | each | 285.45 | ₹8,563.5 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
tendoc.pdf
Tender Documents • 2.39 MB
Instructions-to-bidders.pdf
Other Documents • 0.33 MB
BOQ_25632.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .