Work of Construction of SGF and allied civil works for 132 KV Railway line bay at 132 KV SS Balluana Deposit Work

Amount

Earth work in excavation in foundations, trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.

Earth filling under floors with surplus soil containing gravel or kankar up to 40 % excavatd from foundations & taken only from out side the building plinth in 15 Cm layer i/c ramming , watring & consolodating up to lead of 30 Mtrs

Dismantling Reinforced cement concrete

Dismantling cement conglomerate floor 25 to 50 mm thick without concrete base

Scraping-Bricks dismantled from brick work in lime or cement.

Dismantling of Brickwork in cement sand mortar

Shuttering for faces of concrete foundations and foundation beam & plinth beam

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels

Centring & shuttering for flat surfaces such as suspended floors, roofs landings etc.

Cement concrete 1:8:16 With stone aggregate 40mm gauge

Cement Concrete 1:6:12 with 40mm gauge stone aggregate.

Cement concrete 1:5:10 with 40mm stone ballast

Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 machanically batch mixed using batch type mixer as per IS1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechnically batch mixed using batch type concrete mixture as per IS 1791 and vibrated by needle vibrator but execulding steel reinforcement centring and shuttering in super structure.

DPC 7.5 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded.

Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)

First class burnt brick work laid in cement sandmortar 1:6 in foundation and plinth

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

Ist class burnt brick work laid in cement sand mortar 1:4 in 1st storey up to 4.00 mtr above plinth level.

Extra for brick work done above 4.00 mtrs for every adition al ht of 2.00 mtrs. (Parapet )

Terracing consisting of tiles 22.86x11.43x3.83 cm laid over 25mm mud plaster 7.5cm mud filling on another level of 25 mm mud plaster i/c 2-coats of bitumen laid hot @ 1.65 kg/sqmtr on top of RCC slab i/c grouting with cement sand mortar 1:4 & top surface to be left clean after wire brushiing.

Bottom Khura on ground 1.2m x 0.6m consisting of brick on edge in cement mortar 1:3 over 75 mm CC of 1:8:16 i/c 12.5 mm thk Cement plaster 1:3.

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

CC gola 1:2:4 10 cm x 10 cm concave quardant along junction of roof with parapet finished smooth

Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. Hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge.

P&F110 mm dia SWR UPVC bend for rain water pipe as per IS:14735.

Providing and fixing 110 mm dia . U.P.V.C Rainwater pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item).

Base course of floor consisting of 100 mm thick CC 1:8:16 & 100 mm sand filling.

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 40 mm thick cement concrete topping 1:2:4.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Flat brick or tile flooring laid in cement sand mortar 1:4 on 100mm thick cement concrete 1:8:16 and 100mm thick sand filling and cement pointed 1:2 on top.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).-Size 600x600 mm

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

20mm thick cement plaster 1:4 in two coat work

20mm thick cement plaster 1:5 in two coats work

Plastering on underside of ceiling 10mm thick cement plaster 1:4

Finishing walls with acrylic smooth exterior paint of required shade with 2-coats applied @ 1.67 ltr/10 sqmtr over & incluiding base coat of water proofing cement paint applied @ 2.20 Kg / 10 sqm.

Wall painting with Plastic emulsion paint of approved brand in two coats

Preparation of plastred surface or concrete surface for painting PE (incluiding sand papering the surface ) using ready mixed cement based wall putty by applying 2-coats to get required finish.

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

For shutter area above 0.50 sqm

Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge.

Fixed portion for chowkats

Shutters of doors / windows/ cup Boards

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge -Float glass panes of 5 mm thickness

Steel reinforcement for RCC work where not included in the complete rate of RCCincluding bending, binding and placing in position complete:- Up to 20mm dia bars.

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.

Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

Electrical installations

PVC conduit pipe wiring system with modular switches. Wiring in PVC insulated copper conductor single core FR cableoverall 1.5sqmm to be laid in heavy gauage PVC conduit pipe 20/25mm dia recessed in wall etc complete with powder coated/anodizes metal boxes

wiring fan point with fan box

wiring light point

wiring 6 amp plug control

wiring 16/20amp power plug control point

Supply and erection of PVC insulated FR single core copper conductor cable suitable up to 1100 volts grade

overall size 1.5 sqmm

overall size 2.5 sqmm

overall size 4 sqmm

Supply and erection of heavy gauge PVC conduit pipe 25mm dia on surface for wiring purposes including bend ,junction boxes, etc

Supply and erection of MCB single pole 0.5-4amp (10KA,curve-C)for circuit protection against overload and short circuit control fault suitable for 240/415 volts

Supply and erection of MCB single pole 5-16amp (10KA,curve-C)for circuit protection against overload and short circuit control fault suitable for 240/415 volts

Supply and erection of MCB single pole 50 ,63amp (10KA,curve-C)for circuit protection against overload and short circuit control fault suitable for 240/415 volts

Sheet metal double door distribution board for MCB/RCBO/RCB SP&N Double door distribution door 8 way each

NON-SCHEDULE ITEMS

Supplying & Fixing of General purpose tube fitting of Crompton make on wall of 1X36 W T-5 (CFL).

Providing & fixing ceilling fans standard make 1400mm sweep of cool breeze range with regulator Crompton Make.

Supplying & Fixing exhaust fan 18'' sweep of Crompton make including louver (Model T5JB1328EB) 1x28 W T-5.

Supply & fixing 12'' exhaust fan sweep of crompton make including louver (MODEL T5JB1328EB) of 1x28WT-5

Supplying & Fixing Ceiling light of 42 Watt 2'x2' fittingg of Havells make.

Providing & Fixing MS nosing made of angle of size 30x30x3 mm with MS flat of 15x4 mm and 6 mm dia steel bar complete as per drawing and directions of Engineer-in-Charge

P/F MS angle iron nosing of size 50x50x3 mm complete in all respects forcable trenches as per drawing no. CW/DS- 2887 R-1

Providing & Fixing MS Chequred plates of 5 mm thickness complete as per directions of Engineer-in-Charge

Providing and fixing of M.S. Cable racks made out of M.S. flat 75x6 mm or M.S. angle 40x40x6 mm complete in all respects as per drawing no. CW/DS- 2887 R-1

Supplying ,Hoisting & placing of Ferro-cement trench cover, frame of size given bleow made of MS flat 50x3mm with 6mm dia bars at 4-1/2” and 9” c/c welded to flat with lifting hook as per DRG.No. CW/ DS-2537-R-5 and CS/DS -2420 –R-3 complete.-T-3-type trench of siz 30.65x0.65 as per technical specificiation no.13

T-4 type 2'6''x1'9''

T-1 type 2'8''x1'6''

Fixing of templates along with foundation bolts as per Drg.

Supplying and spreading of 20 mm size crushed stone in 75 mm thick layer over existing PCC flooring in the yard area

Flooring of Cement Concrete 1:5:10 with crushed stone 20 mm size mechanically mixed laid in 75 mm thickness in blocks of size 3.0mx3.0m using shuttering complete in all respect including preparation of surface for laying concrete.

Providing & Laying of cement Slurry of cement to sand ratio 1:6 using cement content not less than 150kg per 100 Sqm area complete.

Disposal of surplus earth/malba upto 5 KM lead including loading/unloading

Recovery of bricks dismantled

Recovery of tiles dismantled

Adjusted/Landing Rates (i/c the effect of extra carriage and difference of quarry rates wherever applicable)

Fine Sand

Cement

Steel

Coarse Sand

Crushed Bajri 12mm/13.2mm

Crushed Bajri 10mm/11.2mm

Stone ballast 40mm

Bricks

Tiles

DINESH KUMAR GOYAL CONTRACTOR

ARANAYA BUILDCON AND ENGINEERS

VANDANA BUILDERS