Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 CrAdmitted-Finance | ₹18.5 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | DYNAMIC CONSTRUCTION L1 |
|---|---|---|---|---|
| 1.00Details | ||||
| 2.00Bala to Piskahatu (L-2.150 Km.) | ||||
| 3.00 | Clearing and grubbing of road land including uprooting wild vegetation grass, bushes, shurbs, saplings and tress of girth upto 300 mm, removal of stumps of such tress cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000 mtr including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification Clause 201 | 0.41 | ha | 4,61,377.95 ₹1.9 L |
| 4.00 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1
Free Lead | 1,203 | m3 | 1,362.35 ₹16.4 L |
| 5.00 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1
1000m Lead | 300.75 | m3 | 3,095.73 ₹9.3 L |
| 6.00 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.) | 46.58 | m3 | 28,089.6 ₹13.1 L |
| 7.00 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.) | 54.46 | m3 | 26,060.32 ₹14.2 L |
| 8.00 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.0 kg/sqm using mechanical means as per Technical specification clause 502 (including carraige of all materials , all taxes, royalty etc, all complete job) | 726.14 | m2 | 486.2 ₹3.5 L |
| 9.00 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (including carraige of all materials , all taxes, royalty etc, all complete job) | 4,166.25 | m2 | 136.62 ₹5.7 L |
| 10.00 | Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 (including carraige of all materials , all taxes, royalty etc, all complete job) | 109.36 | m3 | 1,04,772.58 ₹1.1 Cr |
Tender Value
₹1.7 Cr
EMD Value
₹3.4 L
Closing Date
28 Feb 2022, 5:00 pmClosed
CHIEF ENGINEER, JSRRDA
3rd Floor FFP Building Dhurwa, Ranchi Jharkhand 834004
Repair and Maintenance of PMGSY Roads
2022_CEJHR_116098_17
e-Tender No.- 09 /2021 Repair of Roads (2ndCall)
Open Tender
Civil Works - Roads
213 days
KHUNTI
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
Online Only
₹3.4 L
11 May 2022
19 Feb 2022
2 Mar 2022
19 Feb 2022
28 Feb 2022
19 Feb 2022
Amount
Details
Bala to Piskahatu (L-2.150 Km.)
Clearing and grubbing of road land including uprooting wild vegetation grass, bushes, shurbs, saplings and tress of girth upto 300 mm, removal of stumps of such tress cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000 mtr including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification Clause 201
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 1000m Lead
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)
Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.0 kg/sqm using mechanical means as per Technical specification clause 502 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 (including carraige of all materials , all taxes, royalty etc, all complete job)
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) coarse and fine aggregate confirming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene fil, wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation, including provision of contraction and expansion, consturction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14 days, including use of curing compound where specified and water finishing to lines and grade as per drawing and technical specification clause 1501 (including carriage of all materials, all taxes, royalty etc. all complete job)
Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 5th Kilemetre stone (precast) - (500 x 250 x 1525mm)
Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) Ordinary Kilemetre stone (precast) - (350 x 250 x 1100mm)
Reinforced cement concrete M-15 grade local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 200 m stone (precast) - (15 cm x 10 cm x 65 cm)
Reinforced cement concrete M-15 grade wheel guard/F.I. post of standard design as per IRC 25 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job)
Providing and fixing of typical PMGSY Informatory Singboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25 x 25 x 5mm -do- -do- as per technicaal specification clause 1701and Annexure 1700.1
Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701
Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
Earthwork in excavattion in all kinds of soil for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring & bracing, removal of stumps and other deleterious material and disposal upto lead of 50 M, dressing of side in upto 3.0 m depth.
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 (including carraige of all materials , all taxes, royalty etc, all complete job)
Stone masonry work in cement mortar in foundatoin and plinth complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in f&p (including carriage of materials, all taxes, royalty etc. complete job)
Stone masonry work in cement mortar in substructure complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in s/s (including carriage of materials, all taxes, royalty etc. complete job)
Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications (P.C.C. Grade M-15) (including carriage of materials, all taxes, royalty etc. compelte job)
Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204 (including carraige of all materials , all taxes, royalty etc, all complete job)
White washing two coats on parapet walls as per technical specification clause 1915
Lukudda to Ramda (Upto Bohonda) (L-2.500 Km.)
Clearing and grubbing of road land including uprooting wild vegetation grass, bushes, shurbs, saplings and tress of girth upto 300 mm, removal of stumps of such tress cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000 mtr including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification Clause 201
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 1000m Lead
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)
Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.0 kg/sqm using mechanical means as per Technical specification clause 502 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 (including carraige of all materials , all taxes, royalty etc, all complete job)
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) coarse and fine aggregate confirming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene fil, wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation, including provision of contraction and expansion, consturction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14 days, including use of curing compound where specified and water finishing to lines and grade as per drawing and technical specification clause 1501 (including carriage of all materials, all taxes, royalty etc. all complete job)
Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 5th Kilemetre stone (precast) - (500 x 250 x 1525mm)
Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) Ordinary Kilemetre stone (precast) - (350 x 250 x 1100mm)
Reinforced cement concrete M-15 grade local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 200 m stone (precast) - (15 cm x 10 cm x 65 cm)
Reinforced cement concrete M-15 grade wheel guard/F.I. post of standard design as per IRC 25 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job)
Providing and fixing of typical PMGSY Informatory Singboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25 x 25 x 5mm -do- -do- as per technicaal specification clause 1701and Annexure 1700.1
Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701
Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
Earthwork in excavattion in all kinds of soil for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring & bracing, removal of stumps and other deleterious material and disposal upto lead of 50 M, dressing of side in upto 3.0 m depth.
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 (including carraige of all materials , all taxes, royalty etc, all complete job)
Plain/Reinforced cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10) (including carriage of materials, all taxes, royalty etc. compelte job)
Stone masonry work in cement mortar in foundatoin and plinth complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in f&p (including carriage of materials, all taxes, royalty etc. complete job)
Stone masonry work in cement mortar in substructure complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in s/s (including carriage of materials, all taxes, royalty etc. complete job)
Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications (P.C.C. Grade M-15) (including carriage of materials, all taxes, royalty etc. compelte job)
Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 (including carraige of all materials , all taxes, royalty etc, all complete job)
Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (including carriage of materials, all taxes, royalty etc. complete job)
White washing two coats on parapet walls as per technical specification clause 1915
Tekanya to Sigid Block Boundery (L-1.850 Km.)
Clearing and grubbing of road land including uprooting wild vegetation grass, bushes, shurbs, saplings and tress of girth upto 300 mm, removal of stumps of such tress cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000 mtr including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification Clause 201
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 1000m Lead
Providing granual sub base course with local materials (Table 400.13) by mix-in-place method: normal construction of granular subbase by providing local material, spreading in uniform layers with tractor mounted grader on prepared surface, mixing by mix-in-place method with rotavator at once and compacting with smooth wheeled rollor to achieve the desired density complete as per clause 401.4 as per MORD technical specification clause 408 (including carriage of materials, all taxes, royalty etc. complete job)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)
Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.0 kg/sqm using mechanical means as per Technical specification clause 502 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (including carraige of all materials , all taxes, royalty etc, all complete job)
Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 (including carraige of all materials , all taxes, royalty etc, all complete job)
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) coarse and fine aggregate confirming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene fil, wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation, including provision of contraction and expansion, consturction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14 days, including use of curing compound where specified and water finishing to lines and grade as per drawing and technical specification clause 1501 (including carriage of all materials, all taxes, royalty etc. all complete job)
Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 5th Kilemetre stone (precast) - (500 x 250 x 1525mm)
Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) Ordinary Kilemetre stone (precast) - (350 x 250 x 1100mm)
Reinforced cement concrete M-15 grade local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 200 m stone (precast) - (15 cm x 10 cm x 65 cm)
Reinforced cement concrete M-15 grade wheel guard/F.I. post of standard design as per IRC 25 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job)
Providing and fixing of typical PMGSY Informatory Singboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25 x 25 x 5mm -do- -do- as per technicaal specification clause 1701and Annexure 1700.1
Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701
Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
Stone masonry work in cement mortar in substructure complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in s/s (including carriage of materials, all taxes, royalty etc. complete job)
Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications (P.C.C. Grade M-15) (including carriage of materials, all taxes, royalty etc. compelte job)
Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204 (including carraige of all materials , all taxes, royalty etc, all complete job)
White washing two coats on parapet walls as per technical specification clause 1915
Labour Cess @ 1%
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
JH-M-KHU-01-2021-22.pdf
Tender Documents • 1.37 MB
BOQ_186890.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid