Supply of Furniture at HRD hall Udyog Bhawan, Jaipur.

Amount

EXECUTIVE CHAIR (with headrest and Black colour): The seat is made up of 1.4± 0.1 chick hot - press 4 plywood upholstered with fabric and moulded polyurethane foam. It has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. SEAT SIZE: 50.0cm (W)x 49.0cm(D).The Back is injection moulded in Glass filled Polyamide which is upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 6.0±0.1cm.BACKSIZE: 50.0cm(W) x68.0 cm(H).The polyurethane foam for seat is of density 55± 5kg/m3. It is made of glass filled Polyamide arm structure with PU arm top and height adjustment of 7.0 ±0.5cm.The arm top has swivel and To-For movements. To-for movement is 6.0± 0.5cm.The inner tube of armrest is chrome plated. The mechanism is designed with the following features:• 360° revolving type.• Centre tilt Synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. The Headrest is injection moulded din Glass Filled Polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the Full back chair. The pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.The pedestal is High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal is 65.0±0.5 cm P.C.D. The twin wheel castors are injection moulded in black Glass filled polyamide having 6.0±0.1cm wheel Diameter. The Chrome plated tubular frame is made of Día2.8±0.03cm x0.2±0.02 cm the M.S. Round tube. The frame is fitted with plastic caps made of injection moulded glass filled Polypropylene. -75(W)* 75(D)* 100-109(H)* 44.5-53.5(SH). indicative picture has been enclosed at A

VISITOR CHAIRS (Non-Revolving, Black colour) 1.SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) 2.BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H) 3.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 4.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 5.CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. Tilt tension adjustment. 6.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. 7.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. 8.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) 9. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Product shall be GRIHA, SCS IAQ, GREENPRO certified. indicative picture has been enclosed at B

VISITOR CHAIRS (Revolving, Black colour) 1.SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) 2.BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H) 3.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 4.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 5.CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. Tilt tension adjustment. 6.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. 7.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. 8.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) 9. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Product shall be GRIHA, SCS IAQ, GREENPRO certified indicative picture has been enclosed at C

COMPUTER TABLE WITH PEDESTAL& KEYBOARD SIZE: TABLE : 900 x 600 x 750 MM (L x W x H) 2 DRAWER PADESTAL : 380 x 450 x 725 MM (L x W x H) Main Table & Top Surface: The main table of size 900 x 600 x 750mm with the top surface to be made out of 25mm thick laminated MDF board(Action tesa) with All sides edge banded with 2.00mm thick matching color PVC Edge banding and balancing laminate of matching color on the reverse side. This main top should rest on 18mm thick laminated MDF legs on both the sides and modesty panel in the front. Table top should rest on one side leg and one side pedestal. Pedestal Unit: The drawer unit of size 380 x 450 x 725mm (H x W x D) should made out of 18mm thick laminated MDF board(Action tesa), should have two number of drawers, Fitted with auto hinges, handles, lock and all other hardware/accessories(hettich/hafele) as per design and approved by Engineer-in-Charge (Note: The colour of laminated MDF board shall be strictly as per the directions of Engineer-in-charge) indicative picture has been enclosed at D

Executive Table with Two Side Pedestal SIZE : 1500 X 750 X 750mm (L X W X H) Table Top: The table top of size 1500 x 750mm should made out of 35mm thick laminated MDF board(Action tesa) All edge duly sealed with PVC edge banded 2.00 mm thick of matching color. Legs: The top to be supported by pedestal unit on Two side and an 18mm thick laminated MDF Board and four side edge banding leg on the other side.The leg to be FSEB on front and rear side and the rest of the sides should be edge banded with 2.00 mm thick PVC Edge Banding. Fitted with auto hinges, handles, lock and all other hardware/accessories(hettich/hafele) as per design and approved by Engineer-in-Charge Pedestal Unit:(1) The drawer unit of size 380 x 450 x 725mm (H x W x D) should made out of 18mm thick laminated MDF board(Action tesa), should have three number of drawers, Fitted with auto hinges, handles, lock and all other hardware/accessories(hettich/hafele) as per design and approved by Engineer-in-Charge Pedestal Unit:(2) The drawer unit of size 380 x 450 x 725mm (H x W x D) should made out of 18mm thick laminated MDF board(Action tesa), should have two number of drawers, Fitted with auto hinges, handles, lock and all other hardware/accessories(hettich/hafele) as per design and approved by Engineer-in-Charge (Note: The colour of laminated MDF board shall be strictly as per the directions of Engineer-in-charge) indicative picture has been enclosed at E

StorageUnit with openable Shutter Size1350x450x1200(wxdxh) The structure is made out with 18 mm thickprelaminatedMDF board(Action tesa) with 2.00 mm thick PVC edge banding of matching color having total 3 Partitions for storage provided with 2Nos of fixed shelves there is a 2’’ skirting provided in the bottom area. The top of the unit is made of 25 mm thick MDFboard(Action tesa) board Edges duly sealed with all sides banded with 2.00 mm thick PVC edge banding of matching color The unit is duly covered with 4 Nos of shutters made out with 18 mm thick prelaminatedMDF board(Action tesa)on both side all flat edge sealed with 2.00 mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All shutter fitted with auto close hinges, handles, lock and all other hardware/accessories (hettich/hafele) as per design and sample approved by engineer in charge. (Note: The colour of laminated MDF board shall be strictly as per the directions of Engineer-in-charge) indicative picture has been enclosed at F

StorageUnitopenable Shutter Size900x450x1800(wxdxh) The structure is made out with 18 mm thick prelaminatedMDF board(Action tesa) with 2.00 mm thick PVC edge banding of matching color having total 4 Partitions for storage provided with 3Nos of fixed shelves there is a 2’’ skirting provided in the bottom area. The top of the unit is made of 25 mm thick MDFboard(Action tesa) board Edges duly sealed with all sides banded with 2.00 mm thick PVC edge banding of matching color The unit is duly covered with 4 Nos of shutters made out with 18 mm thick prelaminatedMDF board(Action tesa)on both side all flat edge sealed with 2.00 mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All shutter fitted with auto close hinges, handles, lock and all other hardware/accessories (hettich/hafele) as per design and sample approved by engineer in charge. (Note: The colour of laminated MDF board shall be strictly as per the directions of Engineer-in-charge) indicative picture has been enclosed at G

StorageUnit with sliding shutter Size1600x450x750(wxdxh) The structure is made out with 18 mm thick prelaminatedMDF board(Action tesa) with 2.00 mm thick PVC edge banding of matching color having total 2 Partitions for storage provided with 1Nos of fixed shelves there is a 2’’ skirting provided in the bottom area. The top of the unit is made of 25 mm thick MDF board(Action tesa) board Edges duly sealed with all sides banded with 2.00 mm thick PVC edge banding of matching color The unit is duly covered with 4 Nos of sliding shutters made out with 18 mm thick prelaminatedMDF board(Action tesa)on both side all flat edge sealed with 2.00 mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All shutter fitted with auto close hinges, handles, lock and all other hardware/accessories (hettich/hafele) as per design and sample approved by engineer in charge. (Note: The colour of laminated MDF board shall be strictly as per the directions of Engineer-in-charge) indicative picture has been enclosed at H

M/S JAIPUR CRAFT AND ART

Samridhi Associates

Dynasty Modular Furnitures Pvt Ltd

Rashmi Enterprises