REPAIR REPLACEMENT OF PLUMBING SANITARY FITTINGS JOINERY AND ALLIED WORKS IN CHARARI N-2 ROAD KAJIKHERA SUBHASH ROAD AND JK AT AFS CHAKERI KANPUR

Amount

S&F in repair internal flushing kit of PVC low level flushing cistern and making functional complete all as specified and dircted .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and dircted .

M& L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M& L for 7 to 8 mm thick glazed coloured ceramic tiles in vertical surfaces 300mm x450mm or as required size at site in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) on fair faces of brick work/concrete surfaces complete all as specified and dierected

M&L 18 mm thick for marble work (table rubbed and polished ) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of any shade over and including 15 mm thick screed bed in CM (1:6) layer for laying floor finishes including rounding edges and taking down old one complete all as specified and directed.

S&F ir repair 15 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc at any position complete all as specified and directed.

S&F ir repair 20 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc any position complete all as specified and directed.

Cutting chases, pinnng in, iin brick walls making good to faciing where required and pointing in cement mortar (1:3) for concealed water tubing, and crossing one side of wall to another side by cutting or drilling exceeding 10 cm but not exceeding 50 cm girth complete all as specified and directed.

S&F in repair gun metal globe or gate valve for 15 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair gun metal globe or gate valve for 20 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed.

Taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall/ concrete surfaces with mixing water proofing compound as per manufacturer instruction, finish even and smooth without using extra cement incl preparation of surface and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L10 mm thick plaster in CM 1:6 finished even & smooth w/o using extra cement including applying 2 coat Oil Bound Distemper over a coat of primer over and incl 1 mm thick wall care putty and the surface of plaster complete all as specified and directed

M&L for 5 mm thick plastering on ceiling in cement mortar (1:3) finished even and smooth without using extra cement including 3 coat of white wash over newly plastered surface complete all as specified and directed.

S&F in repairs sinks made of stainless steel sheet 1mm thick as in kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level dual flush cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern of size 580 mm x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to disturbed surfaces excluding flushing cistern and flush pipes complete all as specified and directed .

S&F in repair PVC connection 15mm size with PTMT nuts of length 600 mm/900 mm long complete all as specified and directed.

S&F in repair aluminium anodised tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed .

S&F in repair 32 mm waste coupling of PTMT half or full threaded min minimum wt not less than 45 gm complete all as specified and directed .

S&F in repairs 40mm CP waste coupling for steel sink complete all as specified and directed .

S&F in repairs PVC waste pipe 32/40 mm dia, 800 mm long, complete all as specified and directed.

S&F in repair 125mm/ 150mm dia PTMT grating with or without waste hole fixed on floor trap / nahani trap with white cement complete all as specified and directed

S&F in repair vitreous china wash basin white round back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed by Engr-in-charge.

Demolition of brick work built in Cement Mortar complete all as specified and directed.

M&L for brick work with fly ash brick straight or cuved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar using of old size bricks complete all as specified and directed

M&L for brick work (EXCEPT BRICK) straight or cuved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar using of old size bricks complete all as specified and directed.Note:- Old bricks obtained from item No 26 shall be reused after cleaning.

S&F in repair of 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 142 gms).complete all as specified and directed

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 210 gms).complete all as specified and as directed

S&F in repair 500 ltr rotatational moulded polyethylene white colour water storage tanks(cylindrical vertical with closed top) triple layered construction, fixing arrangement to screwed the lid cover, hoisted& fixed in position complete all as specified and directed

S& F in repairs pillar taps 15 mm dia of PTMT any colour scewed for iron pipe ans fixed (Min Wt 110 Gms).complete all as specified and directed.

S&F in repairs stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms) complete all as specified and directed.

S&F in repairs angle stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms) complete all as specified and directed.

S&F in repair PVC lid for water storage tank suitable for 500/1000 ltr capacity complete all as directed.

S& F in repair MS kitchen sink/WHB bracket as fixed in CM 1:3 or PCC 1:2:4 type BO complete all as specified and directed.

S&F in repairs Bib taps standard of PTMT,15 mm dia any colour screwed for iron pipes (Min Wt 90Gms), complete all as specified and directed.

S&F in repair 15 mm bore Swivel shower of PTMT any colour for fixing with15mm pipe .(Minimum weight 40gms) complete all as specified and directed.

S & F in repair 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in walls upto height of 6th floor complete all as specified and directed.

Ditto all as per item no.39 here-in-before but for 100 mm bore.

Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes, etc capacity exe 250 litre but n exe 500 litre,complete all as speified.Note-Date of cleaning should be mentioned over each tank by synthetic enamel paint complete all as specified and directed.

S&F single side prelaminated solid PVC door frame of size 50 mm x47 mm made out of 5 mm colour PVC sheet reinforced with MS tube , fixed in opening complete all as specified and directed .

S&F factory made both side prelaminated solid panel PVC door shutter 30mm thick (style) considting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail &bottom rail on either side & as gap insiert for top rail& bottom rail, panelling of double side prealm PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as spd & directed.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified

S&F Aluminium handles extruded type ,anodised of 125 mm size complete all as specified

S&F in repair 75mm long double legged door stopper of aluminium alloy with rubber all as specified and directed .

S&F in repair aluminium anodized hasp & staple safety type with mild steel hinge pin incl. bolt to hinge plate fixed with screws of 100mm length all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as speficied & directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as speficied & directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed

S&F 3.5 mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed

Taking down chowkhat or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

All as per item No 54 but exc 1.50 Sqm but n.exc 4.00 Sqm

Taking down shutter exc. 1.0 Sqm and not exc.2.0 Sqm all as spd & directed.

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.

S&F 100 mm size but hinges medium weight cold rolled mild steel complete all as spd & directed.

S&F in repair 100 mm size but hinges medium weight cold rolled mild steel complete all as spd & directed.

S&F in mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F 300mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed

S&F 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S&F in repair 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S&F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S&F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Taking down steel steel windows with frame (wihtout taking of shutter from frame ) of any description etc complete all as specified and directed.

S&F Steel window with side hung shutters incls box type hinges with steel handle and steel peg stay complete with or without glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed.

S&F Steel ventilator with top hung shutter incls hinges steel peg stay complete all as specified.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similer work complete all as specified and directed

S&F in repair100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as spd & directed.

S&F in repair Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified

S&F in repair Aluminium handles extruded type ,anodised of 125 mm size complete all as specified

M&L Preparation of old decorated surfaces of walls/ceiling , pillars & cornices including brooming down and cleaning the surfaces & applying one coat of white wash complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 79 here-in-before but applying on steel surfaces.

M&L for complete removal of previous treatment and preparation of old plastered surface of walls and applying two coat of oil bound distemper over and including one coat of primer over 1-2 mm wall care putty complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with flange complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy pillar cock complete all as specified and directed.

S&F in repairs 15mm bore angle valves, cast copper alloy fancy type chromium plated with flange complete all as specified and directed.

M&L preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed .

M&L for preparing OLD plastered or unplastered surface of wall pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke, roots,moulds ,moss and efforehance, salt and trading oil and greasy spot, nails, holes cracks and making good and applying One coat of cement base paint complete all as specified and directed

M&L rendering in CM 1:6 to patches of damaged/loose portion of external surfaces of wall not exceeding 1.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisisting finished surfaces by providing two coats of cement based paint over primer complete all as specfied and directed . Note: The repair shall be done upto 2nd floor and the cost of scafolding shall be deemed to inclusive of unit quoted rate.

ditto as per item No 87.00 here-in-before but in CM 1:4 to internal surfaces of wall by providing two coats of oil emulsion distamper over and including a coat of primer and 1.00 mm thick wall care putty complete all as specified and directed.

M&L rendering in CM 1:3 to patches of damaged/loose portion of ceiling surfaces of wall not exceeding 1.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisiting finished by providing three coats of white wash complete all as specfied and directed .

M&L for filling the gaps of joints of tiles/granting/WHB or any other similar article by applying Birla white cement complete all as specified and directed by the engr-in- charge.

M&L MS work such as grills, grating, hold fast etc with end of bars shouldered and/ or reveted or forged in to spikes framed guard bars barred iron doors ; ladders; framed balusters, walk ways railing, framework of water tanks and simillars works conforming to Fe 290 complete all as specified and directed. Note for Item No 1 to 90 : - (a) All item shall executed/covered upto 4th storey height . (b) All T&P, mask sanitiser, safety equipments and other items required at site under subject contract shall be provided by Contractor. Cost of temporary supports such as Props, Jacks, Scaffolding, Shuttering etc as up to 4th storey required for each individual case component wise is deemed to be included in unit rates quoted. (c) Adequate safety arrangement need to be ensured to avoid accidents/mishap & cost of same is deemed to be included in unit rates quoted.

Note: - Item No-01 to Item No-91 (i) Priority-I : Complaints pertains to major water leaks, air locks, flushing cistern,replacement of bib Tap,Pillar Tap,Angle Cock, PVC Connections,small fittings of GI,replacement of rusted GI Pipe line,Float Wall,Replacement of Water storage Tank in case of Heavy leakage,Plaster in Patch wk of internal/external etc will be attended on priority-I and the same will be completed within 8 to 12 hrs. (ii) Priority-II : Complaints pertains to re-glazing of door and windows, easing of joinery,replacement of wire mesh etc will be attended on priority-II and the same to be completed within 72hrs. (iii) Priority-III : Compaints pertains to PCC flooring and similar nature will be attended within a week. (iv) Contractor or his supervisor shall collect the complaint/job card from JE concerned between 0900 hrs to 1000 hrs dailly on working days and deposited the same after completion of job duly signed by user/occupants. (v) Summary of complaints will prepared by the contractor and put up to Engineer-in-Charge last date of every month. (vi) If contractor shall not attend the complaint as per time frame given in Para (i) to (vii), Rs 100/- per complaint will be recovered from the RAR/Final bill.

M/S ASM ENTERPRISES

M/S BABA CONSTRUCTION