REPAIR TO JOINERY,GLAZING , FALSE CEILING, WARDROBES,ROOFING,PLUMBING AND SANITARY WORKS ETC IN OTM AND MD ACCN AT MARIANI UNDER AGE B/R-II UNDER GE JORHAT.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as directed.

Taking down chowkats or frames ( without taking off shutters from the frame ) size exc. n.exc. 1.50 sqm each etc complete all as specified and directed.

Taking down chowkats or frames ( without taking off shutters from the frame ) size exc. 1.50 sqm but n.exc. 4 sqm each etc complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm size each etc complete all as specified and directed.

Taking down shutters of any description exc 1 sqm size but n.exc.2 sqm each etc complete all as specified and directed.

Dismantling PVC ( SWR) pipes of bore upto 110 mm with all fitting ,fixed at any position etc complete all as specified and directed.

Dismantling old decayed timber scantling 40 sqcm and over in section in any position in unframed work and removing from site etc complete all as directed.

Dismantling old decayed timber fillets , rails , posts,rafters, purlins, etc under 40 sqcm in section in any position in unframed work and removing from site etc complete all as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs exc half brick but not exc one brick wall etc complete all as specified and directed.

Materials and Labour for, Non - Skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed.

Materials and Labour for, Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.

Materials and Labour for, Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3),complete all as specified and directed.

Materials and Labour for,Glazed Ceramic coloured tiles, ,300 x 200 x 7 to 8 mm thick ,conforming to IS 15622, Grade B II, on vertical surface of wall such as dados,skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.

M&L for 2nd class hardwood , solid, well seasoned , small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as directed.

M&L for 2nd class hardwood Plain, solid, well seasoned , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed.

S&F Flush shutters, 30 mm thick ,solid core construction, with particle board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.

S&F 2nd class hardwood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed.

M&L for Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.

S&F Anodised aluminium Powder Coated of any colour (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Anodised aluminium Powder Coated of any colour (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed / slide type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, guard bars of suitable square or round bars , dovetailed or welded complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

M&L for 2nd class hardwood in scantling , clean saw and fixed etc complete all as specified and as directed.

M&L for 2nd class hardwood Plain fillets. square,rectangular or triangular in section, clean sawn, secured with nails or brads area exc. 6 sqcm but n.exc. 13 sqcm etc complete all as specified and as directed.

M&L for 2nd class hardwood Plain fillets. square,rectangular or triangular in section, clean sawn, secured with nails or brads area exc. 13 sqcm but n.exc. 25 sqcm etc complete all as specified and as directed.

S&F 4 mm tjhick non asbestos fibre cement building boards, fixed or laid/ inserted to timber / GI / Aluminium framework with screws in ceiling etc complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.size of grid 605 x 605 mm etc complete all as specified and directed.

S&F steel tubing 15 mm dia medium grade galvanised , with all GI fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

S&F steel tubing 20 mm dia medium grade galvanised , with all GI fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repairs Bib cock, fancy type , cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.Make:- Jaquar cat part no CON 037KN or equivalent make in Marc / Kohler.

S&F in repairs stop cock / angle cock, fancy type , cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.Make:- Jaquar cat part no CON 053KN or equivalent make in Marc / Kohler.

S&F in repairs stop cock / angle cock, fancy type , cast copper alloy, chromium plated, with long shank and cup ( concealed type ) , screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.Make:- Jaquar /Marc / Kohler.

S&F in repairs Plastic water closet seat and cover for pedestal pan, white / black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.Make:-Prayag / Hindware / Parryware.

Supply and Fix in repairs, mild steel chromium plated aluminium anodised tubular curtain rails 20 mm dia with brackets 2 Nos etc.,complete all as specified and directed.

S&F Rotational moulded HDPE polyethylene 1000 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F in repair 20 mm bore Ball brass valves, high pressure,with polythenefloat and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and Fix in repairs, Pillar taps, 15 mm bore , cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.Make:- Jaquar cat part no CON 011KN or equivalent make in Marc / Kohler .

S&F in repairs, 32 mm dia , waste fittings, IS 2963 brass chromium plated for glazed ware sinks and wash basins etc with long shankl and fly nuts , flange end bedded in red lead cement ,complete all as specified and directed.

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Hindware / Parryware

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag / Parryware / Hindware.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32 mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Parryware Cat part no C8110 or equivalent make in Prayag / Hindware.

S&F in repair Vitreous china wash hand basin, white, flat ball type , size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe 40 / 32 mm dia of suitable length and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed .Make:- Prayag / Parryware / Hindware.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union ,125 mm size complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair 15 mm PVC connection pipe with PTMT nut of length 450 mm complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair 15 mm PVC connection pipe with PTMT nut of length 600 mm complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair MS Chromium plated soap dish fixed to wall with CP screws etc complete all as directed by Engineer-in-Charge .Make:- Prayag / Hindware / Parryware

S&F in repair tubular towel rail , brass chromium plated 20 mm dia 60 cm long between flanges etc complete all as specified and directed.Make:- Prayag Cat part no BA-30 or equivalent make in Hindware / Parryware.

S&F in repair 75 mm bore PVC (SWR) floor trap plain with CP grating setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) multi floor trap plain with CP grating setting and jointing with solvent cement etc complete all as specified and directed.

S & F in repair 125/110 mm bore PVC (SWR) gully trap setting and jointing with solvent cement etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches , floor / wall including taking down old unserviceable one with all fittings etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches , floor / wall including taking down old unserviceable one with all fittings etc complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

S&F 50 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe etc complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled100 mm , complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 75 mm , complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 75 mm , complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt, extruded type, 150 mm long, complete all as specified and directed.

S&F Aluminium anodised handle, fabricated type, 150 mm long, complete all as specified and directed.

S&F Aluminium anodised handle, fabricated type, 100 mm long, complete all as specified and directed.

S&F Aluminium alloy, 300 mm long , anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F 300 mm , MS ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.

M&L for MS works such as Bands, straps chains; hand made sliding bolts; clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. Note:- Holdfast shall be treated with 2 coats of coal tar and cost of the same shall be included in the quoted rate against ibid item.

S&F 3 mm thick sheet glass ordinary type and glazing with oil putty in squares n.exceeding 0.5 sqm in each pane etc complete all as specified and as directed.

S&F 3 mm thick sheet glass frosted type and glazing with oil putty in squares n. exceeding 0.5 sqm in each pane etc complete all as specified and as directed.

S&F in repair 5.5 mm thick sheet glass ordinary type and glazing with oil putty in squares exceeding 0.5 sqm in each pane etc complete all as specified and as directed.

M&L for rendering 15 mm thick, cement plaster, in cement sand mortar (1:6),finished plaster surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering 5 mm thick, cement plaster, in cement sand mortar (1:3) on ceiling ,finished plaster surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for Rendering 5 mm thick cement plaster in cement sand mortar 1:4 on brick / concrete surfaces finished even and fair without using extra cement mixed with water proofing compound at the rate of 3 % by the weight of cement used or as per manufacturer's instruction over and including 10 mm thick cement plaster in cement sand mortar 1:4 etc complete all as specified and as directed by Engr in Charge. Note:- WPC compound shall be measured and paid seperately.

M&L for preparation of new or previously untreated surfaces of ceiling and applying two coats of white wash etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of old or previously treated surfaces of ceiling and applying a coat of white wash etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of old or previously treated wooden surfaces exc 10 cm width or girth and applying a coat of synthetic enamel paint etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of old or previously treated wooden surfaces n.exc 10 width or girth and applying a coat of synthetic enamel paint etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of old or previously treated steel surfaces exc 10 cm width or girth and applying a coat of synthetic enamel paint etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of old or previously treated steel surfaces n.exc 10 width or girth and applying a coat of synthetic enamel paint etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of wood any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of Pink primer etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of wood any description, not otherwise described, n.exc. 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of Pink primer etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of steel any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of Pink primer etc complete all as specified and as directed by Engr in Charge.

S&F in repair MS barrel tower bolt, stove enamelled black with bright bolt , 200 mm long, complete all as specified and directed.

S&F in repair MS barrel tower bolt, stove enamelled black with bright bolt , 150 mm long, complete all as specified and directed.

S&F in repair MS pressed handle oval type , stove enamelled black with bright bolt ,150 long, complete all as specified and directed.

S&F in repair MS pressed handle oval type , stove enamelled black with bright bolt , 100 mm long, complete all as specified and directed.

S&F in repair Mild steel 300 mm long , Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&Fin repair Aluminium anodised barrel tower bolt, extruded type, 150 mm long, complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt, extruded type, 100 mm long, complete all as specified and directed.

S&F in repair Aluminium anodised handle, cast type, 150 mm long, complete all as specified and directed.

S&F in repair Aluminium anodised handle, cast type, 100 mm long, complete all as specified and directed.

S&F in repair 15 mm bore CP two way bib taps , cast copper alloy , with crutch or butterfly handle ,screwed down for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.Make:- Prayag / Hindware / Parryware.

S&F in repair CP Angular stop valve stop valve , cast copper alloy screwed down high pressure, with crutch or butterfly handle of 15 mm bore pipe or fo union etc complete all as specified and directed.Make:- Prayag / Hindware / Parryware.

Taking down existing roof treatment including scrapping with wire brush to remove plaster PCC beddings and cleaning with water and making the surface dry ,to approachable / non approachable RCC roof as per following activities etc complete all as specified and as directed by Engr in Charge. i) Preparation of RCC roof surfaces and providing 15 mm thick cement plaster in cement sand mortar 1:4 mixed with approved water proofing compound @ 3% of the weight of cement used or as per manufacturer's instruction. ii) Supply and applying bituminous based primer conforming to IS-3384 @ 0.40 KG / SQM over plastered surfaces. iii). Supply and applying one coat of hot air blown bitumen of grade 85 / 25 at the rate of 1.20 KG / SQM. iv). M&L for APP (Atactic Polypropylene modified polymeric membrane) based polymeric membrane minimum weighing 3kg/sqm consisting of centre core of 100 micron HM HDPE fprocessed on both sides with a high quality polymeric asphaltic mix with further protected thermofusible HM HDPE film and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with a overlap of 100 mm on transverse sides and 75 mm on longitudinal sides complete all as specified. v) Supply and applying one coat of hot air blown bitumen of grade 85 / 25 at the rate of 1.20 KG / SQM. vi) Supply and applying one coat of heat resistant aluminium paint at the rate of 0.11 KG / SQM.

Demolition of brick masonry built in cement sand mortar etc complete all as specified and as directed.

M&L for Brick work with sub class‘B’ bricks,old size ,well kiln burnt , straight or curved on plan exc 6m mean radius, built in cement sand mortar 1:6 etc complete all as specified and as directed.

M&L for Brick work with sub class‘B’ half bricks,old size ,well kiln burnt , straight or curved on plan to any radius, built in cement sand mortar 1:4 etc complete all as specified and as directed.

Demolition of cement concrete ( un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to a distance n.exc. 50 m etc complete all as specified and as directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregates) as in floor / path / pavings finished fair and even and spike rolling to surfacces or making impression of expanded metal, whilst the concrete is green including necessary formwork complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in plinth protection, finishing surface even and fair without using extra cement including necessary formwork complete all as specified and as directed.

M&L for pre-polished chemically treated Chequered cement concrete tiles 20cm x 20cm x 25 mm thick,set, jointed and pointed in neat cement slurry with grey cement and pigments over and including 20 mm thick screed bed in cement sand mortar 1:4 in floors etc complete all as specified and as directed.

S&F 2nd class hardwood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wall , cornices, pilasters by washing , rubbing and topping and applying two coats of Acrylic washable distemper over and including 1 mm thick wall care putty chalk whitening etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of 100 % Acrylic exterior emulsion base premium quality matt finishn paint (weather coat 1st quality ) over and including a coat of anti fungal exterior type wall primer etc complete all as specified and as directed by Engr in Charge.

Dismantling Plain or corrugated AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.

S&F Pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

S&F Pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering /cladding to wall / eaves and similar nature of work , fixed with self-tapping screws,complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and as directed.

Solid PVC double Door Frame of size 50mm x 95mm made out of 5mm prelam PVC PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening etc complete all as per manufacturers and as specifed and as directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and Fix, Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed.

Supply and Fix, 18 mm Solid PVC Sandwich Panel with lmm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification and as directed.

S&F in repair 300 mm , MS ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.

S&F in repair aluminium extruded Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and as directed.

S&F in repair 100 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed.

Supply only integrall water proofing compound ISI marked etc complete all as specified and as directed.

M/S DHAR AND DHAR

A M CHOUDHURY AND CO

M/S FRONTIER CONSORTIUM