PROVN OF PARKING SHED, HARD STANDING, URINAL POT AND WC AND VEH PARKING SHED AT UMROI MIL STN UNDER GE UMROI

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

S&F of Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screw in roofs, complete all as specified and directed.

S & F Steel work in tubular trusses Fe-410 including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia of neck 10 mm including two washer, complete all as specified and directed.

S&F 6 to 8 mm thick Fe 410-W (GdeE- 250) quality A rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surface including preparation of new or previously untreared surface, complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundations, filling and mass concrete all as specified.

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in foundations, filling and mass concrete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cmin soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, comlete all as specified and directed.

Surface excavation n.exc 30cm deep and avg 15cm deep and getting out in soft /loose soil, complete all as sspecified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, comlete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, comlete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n.exc.1.5min depth for foundation etc and getting out in soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Material and labour for brickwork with AAC block (autoclave aerated concrete) brick work in CM 1:4 ,Straight or curved on plan exc 6 m mean radius, complete all as specified and directed.

Material and labour for 1:3:6, type C1, (20mm gradded stone aggregate) pre-cast cement concrete half block wall masonary, with solid blocks, exc. 10cm in width and setting in mortar (1:4) but n exc. 10cm in width, complete all as specified and directed.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces incl necessary form, work in cement concrete 1:2:4 typeB0 (using 12.5mm graded stone agg )and applying evenly a coat of blown type bitumen @1.50kg per sqm and binding with dry sand @0.50cum per sqm and as directed.

M&L for cement concrete 1:2:4, type B2 (using 40 mm graded stone aggregate) as in foundations, complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface broken stone and boulder complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring, finishing cement concrete surface even and smooth without using extra cement, spike rolling to surface or making impressions of expanded metal, whislt the concrete is green, complete all as specified and directed.

M&L 100 mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring, finishing cement concrete surface even and smooth without using extra cement, spike rolling to surface or making impressions of expanded metal, whislt the concrete is green all as specified and directed.

M&L for 25mm thick PCC, type B-0,1:2:4( 12.5 mm graded stone aggregate) even and smooth without using extra cement, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of block work or concrete surfaces, rendering is to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of block work or concrete surfaces, rendering is to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) as in ceilling on concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) in two layers mixed with liquid water proofing compound as per manufacturers instruction in top layer 5 mm thick finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. NOTE:- ( WPC shall be measured and paid separetely) all as specified and as directed .

Supply only Water proofing compound all as specified and as directed

M&L for two coats of cement base paint over a coat of primer including preperation of newly plastered surface on walls, complete all as specified and directed.

M&L for Three coats of white wash including preperation of newly plastered surface of walls, complete all as specified and directed.

M&L for two coats of colour wash over a coat of white wash on wall, complete all as specified and directed.

M&L for three coats white wash on ceilling including preparation of new surfaces, complete all as specified and directed.

M&L for RCC, M-20 (Nominal Mix) (using 20mm graded stone aggregate) as in slab supported on walls, beams etc, complete all as specified and directed

M&L for RCC, M-20 (Nominal Mix) (using 20mm graded stone aggregate) as in beam, lintels etc, complete all as specified and directed

Use and waste of form work to suspended slab rough finish flat complete all as specified and directed

Use and waste of form work to beams, lintels etc rough finish flat, complete all as specified and directed

M&L for TMT bars 10mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250 complete all as specified and directed

M&L for TMT bars 6mm to 8mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250 complete all as specified and directed

M&L for TMT bars 5mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250 as in stirrups spacers and binders, complete all as specified and directed

M&L for RCC M-20 (Nominal mix) using 20mm graded aggregate as in column, pillars, piers, posts and struts, complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges , steel peg stay, complete all as specified and as directed.

S&F 3 mm thick figured glass, pin headed type glazed with oil putty n.exc 0.50 sqm each pane, complete all as specified and as directed.

S&F aluminum anodised barrel tower bolt 150mm long of extructed section, complete all as specified and as directed.

S&F aluminum anodised handle cast type 150mm, complete all as specified and as directed.

S&F 100mm long butt hinges extruded aluminium alloy with gavanised mild steel hinge pin, complete all as specified and as directed.

M&L for 15mm thhick screed bed or bedding layer CM (1:6) for laying floor finishes, complete all as specified and directed.

Material & Labour non skid Joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.06 sqm but n.exc 0.11 sqm (300X300mm) in floor etc set and jointed in neat cement slury and in coloured cement to match complete all as specified and as directed.

M&L for Glazed Ceramic tiles size 300x200x7 mm Coloured on vertical surfaces set and jointed in neat cement slury and in coloured cement to match. such as dados, complete all as specified and directed.

Supply & fix vitreous china washdown water closet pan (pedestal pattern) white incl seat and cover, complete all specified and as directed.

S&F for vitreous China wash basin, white, flat back, size 630 x 450 mm excl taps, waste, chain and plug and porcelain stopper but incl brackets complete all as specified and directed.

S&F 15 mm bore dia, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

Supply & fix vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement with brackets including waste pipe, complete all as specified and directed.

S&F 10 Ltrs Capacity PVC valveless syphonic action type flushing cistern , low level white, with inlet , ball valve float and handle includigng brackets, complete all as specified and directed.

S&F 15 mm dia bib taps cast copper alloy with cruch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F for 15 mm bore dia, stop valves, fancy type chromium plated screwed down, high pressure, long shank, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450MM, complete all as specified and directed.

S&F 20 mm bore GI tubing including connection fixed complete to walls and ceilings or laid in floors including all fitings, complete all as specified and directed.

S&F 15 mm bore GI tubing including connection fixed complete to walls and ceilings or laid in floors including all fitings, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polythelene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F 20 mm bore ball brass valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F 20 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings laid in trenches or in floors, complete all as specified and directed.

S&F 75 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings laid in trenches or in floors, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F PVC door frame size 50mm x 47mm made out of 5mm wood grain printed coloured PVC sheet reif with MS square tube supplying & fixing in opening as per specification, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 28 to 30mm thick (Stile) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour on back face, complete all as specified and directed.

S&F 40 mm Low Density Polyethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed complete to wall ceiling or in floors, complete all as specified and directed.

S&F grating doom 100mm dia PTMT (Min weight 25 grms), complete all as specified and directed.

S&F PVC towel rail 600mm long and including chromium plated brass screw and wooden/plastic clits (minimum weight 190 grms), complete all as specified and directed.

M&L for 75 mm thick cement concrete type E-2, 1:5:10 (40mm graded agg) as in Sub-base to floor finishes all as specified and directed.

M&L for laying/spreading of sand filling to precast concrete interlocking paver block including watering & consolidating, complete all as specified and directed.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade, jointed with grey cement and no pigment, complete all as specified and directed.

M&L for cement concrete M-15 (Nominal mix) using 20 mm greded aggregate in edging of path (interlocking paver) and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in coping , benching/haunching , slightly rounded or chamfred angle and throating etc complete all as specified and directed.

M&L Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in in surface channels and drains, complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20 mm graded aggregate ) as but in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain face & set in CM 1:6 including necessary form work, complete all as specified and directed.

M&L for 150 mm bore salt glazed stoneware drain pipes grade 'A' laid in trenches, tested and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L for concrete bed to drain pipes incl pakcing under and haunching againat the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded aggregate ) for 150 mm bore of pipe, complete all as specified and directed.

Construction of septic tank for up to 10 users as per drawing no. TD/SZ/504 attached with tender documents complete all as specified and as directed. NOTE: - The construction of septic tank shall be carried out as per Particular specifications formaing part of contract.

Construction of soakage well for up to 25 Users as per drawings no. TD/SZ/502, complete all as specified and as directed. NOTE: - The construction of Soakage Pit shall be carried out as per Particular specifications formaing part of contract.

Material and labour for point wiring for One light/fan point controlled by one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping/ PVC conduit pipe including necessary accessories like bends, tees PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed

All as per Sr. Item No. 88 here in before but for One 3 Pin 5 Amps socket outlet point on same board.

All as per item No 88 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fix of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed and directed.

Supply and fix of switch socket combination 3/5 Pin, 2 in 1, 5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

Supply and fix of switch socket out let combination multipurpose 3/5 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.

Supply and fix of MCB SPN DB 4 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed. Make- Legrand / Indo asian / Havells or its equivalent in specified makes in CA.

M&L for MCB single pole & Neutral (SPN) 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI merked) , complete all as specified and directed.

M&L for MCB single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI merked), complete all as specified and directed.

Supply and fixing Bulb angular/batten holder PVC/Polycarbonate suitable for batten fittings including one No LED Lamp of 9W complete all as specified and directed.

Supply and fixing LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with flexible cable from ceiling rose to light fitting, complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 250 mm sweep with louver complete all as specified and directed.

Supply, laying and testing XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, complete all as specified and directed.

Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed. (Note: Thickness of sand cushion after punning down will be measured and paid.)

M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables , laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.

S&F 32mm bore GI tubing, 'light grade', in trenches/ on pole for cables protection, complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

M&L for cutting of existing GI/DI/CI tubing of size 100mm bore / existing water supply pipe line for taking out branch connection for taping water supply including one number of DI/GI/CI tee of size 80mm x 63mm x 25mm/according existing water supply pipe line Size and connect GI tube including jointing material, necessary excavation in any type of soil and earth work.

Supply & fixing of 25mm bore Tube, 'Medium grade' galvanised, with all fitting laid in trenches, complete all as specified and directed.

Supply and fix Stop valve of 25mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and ditected.

Meterial and labour for construction of block masonary valve pit of size 60cmx60cmx60cm (internal dimension) and MS plate cover with angle iron frame, hings and locking arrangements and handle including necessary excavation in any type of soil, returning filling in and removal of surplus soil to distance not exc 50 mtr, rendering block masonary wall in cement motor (1:4) (internaly/externaly) and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces after dismentling old unserviceable one all as speciffied and directed by Engineer -in -Charge

M/s UB Enterprise

M/S C.M.V CONSTRUCTIONS