Construction of sports Hall at Tribal communities at Gujjar and Bakerwal Girls Hostel, Jammu.

Amount

Earthwork in excavation by manual means in trenches for foundation drains , pipes cables etc.not exceeding 1.5mtrs in width)and for shafts wells, cesspits and like not exceeding 10sqm.on plain depth upto 1.5mtrs incl. disposal of excavated earth upto 1.0mtr from cutting edge, disposed earth to be levelled and neatly dresses in all kinds of soil. including all leads, lifts and carriages complete.

Providng and laying in position cement concrete of specified grade in excluding cost of centering, shuttering all work upto plinth level 1:4:8 (1 cement : 4 fine sand : 8 graded crushed 40mm agg.) including all leads, lifts and carriages complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:3:6 mix(1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) (Crushed) including all leads, lifts and carriages complete.

Reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete indluding all leads, lifts and carriages complete (Cold twisted bars).

Centering and shuttering incl. strutting, propping etc. and removal of form work for including all leads, lifts and carriage complete:

Foundation, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth and plinth in cement mortar 1:6 (1 cement: 6 fine sand) including all leads, lifts and carriage complete.

Extra for brick masonry in super structure above plinth level upto flour V level including all leads, lifts and carriage complete (By mannual means).

Filling available earth (excluding rock) in trenches plinth sides of foundation etc layers hot exceeding 20cm in depth consolidating each deposited later by ramming and watering lead upto 50m and lift upto 1.5m including all leads, lifts and carriages complete.

12mm thick cement plaster of mix 1:4 (1cement: 4 fine sand) including all leads, lifts and carriages complete.

15mm cement plaster in rough side of single brick or half brick wall mix 1:6 (1 cement : 6 fine sand) Including all leads, lifts and carriages complete.

Making plinth protection 50mm thick of Cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded stone agg. 20 mm) over 75mm bed of dry crushed brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth including all leads, lifts and carriage complete (Crushed).

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete job.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with Synthetic enamel paint of approved brand and manufacture to give an even shade new work (two or more coats) complete job.

Electrification

Providing & fixing of PVC Electric pipe incl Taxes, labour and leads, lifts and carriages complete

Tubelights 4'-0''

LED bulbs

P/F fan of havells make or eqvt. Make including testing ,commissioning complete .

P/F of exhaust fan of havells or eqvt. Make incl. testing , commission complete

Wiring for fan point/ exhaust Fan/call bell point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable in Surface/ recessed medium class PVC Conduit , with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and fixing Stepped Type Electronic Fan Regulator on the existing Modular Plate Switch Box including Connections but Excluding Modular Plate etc. as Required

Steel work in built up tabular round, square or rectangular including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc complete Hot finished welded type tubes.

Providing and Laying Polycarbonate twin wall carbonate sheets manufactured from campact clear, embossed or opal white sheets of approved brand and manufacture having valid IS certificate. 8 mm thick

Providing and laying damp-proof course 50 rnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size (Crushed) including all lead lift & carriage complete

Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering finishing and reinforcement 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregates 20 mm nominal size including carriage

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber Ineoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminium ( minimum thickness of powder coated 50 microns) For Fixed portion

For shutters of Door & windows

Providing & fixing 12mm thick prelaminated particle board flat pressed three layers or graded wood particle board in panelling fixed in aluminium doors, windows etc. Prelaminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) with float glass panes of 5.0mm thickness (weight not less than 12.50 kg/m2)

Providing and fixing Aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colours or shade with necessary screws etc complete job. 200mmx10mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colours and shade with necessary screws etc complete including all leads, lifts and carriages complete. 125mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or due to required colour or shade with nuts and screws complete job. 300 x 16 mm

Note :- 1) Any Tropical error shall be consider as per sanction schedule of rates/ estimates.

M/S MULKH RAJ

M/S MAHESH KOTWAL CONTRACTOR

GANDHARB SINGH

zakir hussain

Kaku Ram

MANOJ KUMAR