CA NO CWE/PAT/T-33/2022-23 ADDITION ALTERATION AND REHABILITATION OF MARRIED ACCN AT MIL STN NABHA UNDER GE SOUTH PATIALA

Amount

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in two layers (10 mm and 5 mm respectively) in cement mortar 1:4 including mixing of liquid water liquid water proofing compound of approved make as per manufacturer's instructions on fair faces of brick work or concrete surfaces or in chajjas / parapet walls etc finished even and fair without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

Rendering 10mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment of any type / description Such as distempering work , inretnal emulsion etc from internal /external surface of wall and ceiling with mechanical mesns/grinder including removal of material from site complete all as specified and as direrected .

Preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of distemper oil emulsion complete all as specified and as directed.

Preparation of old plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.

Preparation of old plastered surfaces and applying two coats of distemper oil emulsion complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

Rendering 5mm thick in cement mortar 1:3 as on concrete surfac in ceiling finished even and smooth without using extra cement all complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling complete all as specified and as directed.

Preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

Demolition of brick work built in cement mortar incl all quoins , arches, pillar etc complete all as specified and as directed.

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 compete all as specified and as directed.

Brick work in CM 1:4 with sub class B bricks straight or curved on plan to any radius but in half brick wall complete all as specified and as directed.

Taking down chowkhats or frames ( without taking off shutters from the frame) exc 1.5 sqm and n. exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

As per serial item No. 16 herein before but n exc 1.5 sqm each.

Painted Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

Painted Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc. of size 125 x 60mm incl cutting holes and making good required shape for hold fast block for new frame complete all as specified and as directed.

Plain Cement Concrete 1:3:6 type C-0 using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame / hold fast block etc and similar compelete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain framed (factory made) panneled shutter (two panel) with lock rail and panels of 9mm B.W.P. commercial ply with commercial veneering on both faces including beading on the facing side of shutter as per SSR part 1 clause No. 8.17.5. The size of rail and sities as per IS 1003(Part 1) kiln seasoned and chemically pressure treated all as specified and as directed..

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-1 section 8 clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Aluminium anodised barrel tower bolt 200 mm long stove enamelled black with bright bolt and fixed complete all as specified and as directed.

Aluminium anodised sliding door bolt of size 250mm, stove enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed.

Aluminum handles 125mm cast type, anodised complete all as specified and as directed.

Mild Steel butt hinges of size 100 mm medium weight cold rolled fixed in repairs including all necessary welding etc complete all as specified and as directed.

Mild Steel, 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

Floor door stoper of aluminum alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete all as specified and as directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 No per leaf.

Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m fixed in position in windows in all respect complete all as specified and as directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beed 20mm size complete all as specified and as directed.

Built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25 mm thick with pressed steel shutter 01 mm thick Godrej pattern fixed to masonry wall by hold fasts, made out of 25 x 3 mm flat iron including mild steel, CP hanging rod of 20mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3, including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame & shutter including taking down old existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as directed and shown on Drg. No. 178 sheet 2/3 & 3/3 dt 12.06.2001 complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F 100mm butt hinges, extrude aluminum alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed.

S&F galvanised mild steel wire cloth with 0.63 nominal dia of wire avg. width of apparture 1.4mm & fixed with tinned tack or wooden bedding complete all as specified and as directed.

Preparing of new surface of wood and wood based material of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors/FF and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed..

Dismantling of floor, hearth or wall tiling including cement bortar bedding but not backing and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for cement concrete 25 mm thick, 1:2:4 type B-0 using 12.50 mm grade crushed stone aggregate complete all as specified and as directed.

M&L for vitrifed Ceramic tiles 8-9 mm thick ( square/rectangular) polished area of each tile not exceding 0.36 Sqm in floors etc. set and joinet in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Coloured Ceramic tiles 7-8 mm thick area of each tile exceding 0.18 Sqm but not exceding 0.38 Sqm in floors etc. set and joinet in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Non skid Ceramic coloured tiles 7-8 mm thick ( square/rectangular) area of each tile exceding 0.06 sqm but not exceding 0.11sqm, in floors etc. set and joinet in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Coloured glazed Ceramic tiles (300x600mm) 7 mm thick as in vertical surface such as skirting , dados etc. jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mmm, bowl size 410 mm x330mmx160mm complete all as specified and as directed.

Taking up or down steel tubing of size 15mm bore and removal to store complete all as specified and as directed.

Taking up or down steel tubing of size 20 mm bore and removal to store complete all as specified and as directed.

Supply and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

Supply and laying of 25mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

Stop valves 20mm dia, cast copper alloy , high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for unions any description complete all as specified.

S&F in repair mild steel chromium plated 20mm curtain rod with fixing brackets, stops rollers complete including fixing brackets, stop etc all as specified and as directed. (Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered)

Dismanting of brick tiles or terracing tile single layer on roof complete all as specified and as directed.

Demolition of mud puska in roof any thickness, including plastering and leeping including removing the spoil to a distance not exc. 50 mtr and deposting where directed at a level n. exc. 1.50m above the starting point complete all as specified and as directed.

Cement concrete 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 50mm to maintain a slope of 1:100 using water proofing compound, complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Cement concrete 1:2:4 type B-0 using 12.5mm grade crushed stone aggregate as in roof kerb or mud stopes/ coping etc. including weathering slightly rounded or chamfered all as specified and as directed.

Providing and laying APP ( Atactic polypropylene polymer) modified pre- fabricated five layer water proofing memorene 3 mm thick having weight not less than 3.60 kg/sqm black finished reinforved with non wooven polymer matt fix after applying one coat of cold applied solvent based bituminious primer @ 0.40ltrs per sqm using bolane torch and sealing all joints etc. confirming to IS 3488 and cement plaster 15mm thick in cm 1:3 all as per manufacturer's instruction complete all as specified and as directed.

40 mm thick brick tiles laid on 15 mm thick cement mortar 1:6 jointed, grouted & ponited flush in separate operation in cement mortar 1:3 complete all as specified and as directed.

All as per item No 58 here-in-before but except brick tiles (using old bricks tiles obtained from item No 52 here in before) complete all as specified and as directed.

Coolar stand made of joist, channel, angle or tee section, fixed independitaly, without connecting plates, conforming to Fe 410-W ( Gde-E-250) quality-A complete all as specified and as directed.

Framed work as in door or gates of angles or other section with gussets plate rails braces etc. complwete drill for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting steel sheeting or other covering running rails and hanging also fastening and fixing complete including pintel hinges stops hand sliding bolts etc. confirming to Fe 410-O or Fe-310-O, including taking down old steel gate complete all as specified and as directed.

Preparing surfaces of any description over 10 cm width or girth, not otherwise described any applying two coats of synthetic enamel paint over a coat of red oxide on new surface of steel or iron complete all as specified and as directed.

PVC (SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joint fixed to the wall complete all as per specified including flat iron clamp 25x3mm and taking out old damaged rain water pipes complete all as specified and as directed.

PVC (SWR) bends of any radius for 110 m dia rain water pipes with rubber ring joints complete all as specified and as directed.

Demolition of existing 500 ltrs capacity RCC water storage tank on roof and removing of the rubbish complete all as specified and as directed.

Dismantling 500 litres water storage tank and removing from site complete all as per specified and as directed.

Rotational moulded polyethylene water storage tanks cylindercial vertical with closed top 500 lts capacity hoisted and fixed in position including 20 mm bore ball brass valve high pressurre with polythene float and fly nut complete all as specified and as directed.

S&F in repair 125 mm brass chromium plated shower rose with arms complete all as specified and as directed.

S&F CP stop cock concealed cast copper alloy with crutch screwed down screwed for brass ferrule 15 mm bore pipe vomplete all as specified and as directed.

S&F Bib tabs 15 mm dia pipe, cast coper alloy cromium plated with capstain head screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F Brass CP mixer for mixing hot and cold water screwed down for iron pipe 15 mm dia complete all as specified and as directed.

S&F in repair, angle valve cast copper alloy cromium plated with capstan head, long shank and cup concealed type,15 mm bore complete all as specified and as directed.

S&F 450 mm long PVC connections with brass nuts on both ends for 15m bore pipes of approved quality complete all as specified and as directed.

Vitreous china wash hand basin off white flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete fixed as in repair complete all as specified and as directed.

S&F in repairs tubular towel rail CP 20mm dia 60cm long between flanges complete all as specified and as directed.

Health faucet (ABS body ) with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in positon complete all as specified and as directed.

S&F in repair PTMT Jet Spray with 1.0 metre PVC tube ( suitabale for european seat ) complete all as specified and as directed.

S&F in repair CP toilet paper holder with flap model complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repair Soap dish, chromimin plate fixed to plug with , chromium plate brass screw complete all as specified and as directed.

S&F shelf of PTMT fixed with and including chromium plate brass screw and wooden / plastic cleats (min wt. 300 gms) complete all as specified and as directed.

S&F in repairs low level flushing cistern of 10 litres capacity, including 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy, screwed both ends , high pressure (wt. not less than as specified in SSR ), PVC flush pipe 32 mm bore complete all as specified and as directed.

S&F in repair viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rest including connection to traps and to flushing pipe, anti syphonage pipe complete all as specified and as directed.

S&F in repair viterous china wash down water closet pan (pedestal pattern) white including white plastic seat cover with mild steel CP hinging device, jointing connection and making good the distrubed surface complete all as specified and as directed.

Hard core of broken bricks of gauge n . exc. 63 mm spread and levelled in layer n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Cement concrete 1:3:6, type C-2 (using 40 mm graded aggregate) 50mm thick as in path, plinth protection finished the surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of reinforced cement concrete of any description (reinforecement cut as required to facilitate demolition) complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 type B1(using 20 mm graded crushed stone agg. ) as in slab support on wall , beam and column in floor roof lading balconies deck slab and in shelves and the like complete all as specified and as directed.

TMT bars 6-8 mm dia and over mild steel as in reinforcement, cut to length bend to shape required including cracking and bending with MS wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L granite 20 mm thick (of any type) work (table rubbed and polished) in steps , jambs, pillars, window-cill, cooking platforms and like in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing, laid over and incl. 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rounding to edge of stone sabs one edge , such as on steps, cooking platform , and other similar situations complete all as specified and as directed.

Machine cut kota stone slab as in flooring 20 mm (+2) mm thick laid over and incl. 15 mm thick screed bed or bedding layers in CM 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing complete all as specified and as directed.

S&F in repairs mild steel peg set of 6, powder coated, fixed to wall with steel screw complete all as specified and as directed.

S&F stainless steel wall mounted kitchen dish rack plate of size 900mm x 750mm x 250mm complete all as specified and as directed.

S&F stainless steel wall mounted kitchen dish rack plate of size 750mm x 600mm x 250mm complete all as specified and as directed.

S&F on wall PVC enclosed case (cabin type) of size 350mm x 450mm x 100mm with cover and looking mirror and two shelves complete all as specified and as directed.

S&F in repair cast iron pipe sand cast waste & vent pipe in any length with or without ears with cement joint laid in trenches or in floor of 100mm bore with sand cast paper all as specified and as directed.

CI cowl of 100mm dia complete all as specified and as directed

S&F in repair cast iron floor trap 75 mm dia with grating including jointing to waste pipe in neat cement and fixed in cement concrete1:2:4 typre B1 complete all as specified and as directed.

S&F in repair cast iron floor trap 100 mm dia with grating including jointing to waste pipe in neat cement and fixed in cement concrete 1:2:4 typre B1 complete all as specified and as directed.

S&F in repair 100 mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair 100 mm branch pieces, double/cross, Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and as directed.

S&F 100 mm bore stack clamp out of 50x 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets as per manufacturer’s specifications complete all as specified and as directed.

18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single rigid laminated of approved colour and other side plain white colour fixed with screws and solvent cement/ adhesive to make kitchen cabinet shutter and shelves complete as per manufacturer’s specifications complete all as specified and as directed.

S&F 12 mm thick LEAD FREE PVC celuka ply of approved colour fixed with screw , solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as pe anufactured specification complete all as specified and directed.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respected and fixed in position all as specified and as directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and as directed.

S&F Piano/continuous hinge of size 30 mm stainless steel complete all as specified and as directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished fixed in position complete all as specified and as directed.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size fixed in position complete all as specified and as directed.

S&F Stainless Steel 304 grade basket cutlery of size 370x485 mm permium quality complete fixed in position complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone agg.) as in sub base of flooring complete all as specified and as directed.

M&L for chequered cement concrete Ties with grey cement and pigment 20 cm x 20 cm x 25 mm thick machine pressed; set jointed and pointed in neat cement slurry in floor , over 15 mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation, shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plain and getting out, complete all as specified and as directed.

Cement concrete type B-2, 1:2:4 ( 40 mm graded stone agg.) in foundations, filling and mass concrete complete all as specified and as directed.

S&F for pre painted galvalume zinc coating GI based corrugatd steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall , fixed to self tapping screw complete all as specified and as directed.

M&L for rectangle/ square/ circular hollow section as in main and cross beams, hip and jack rafters purline, where connected to commom rafter and running rails and guide for structural purpose fixed with angle cleats ot other connecting plates to Fe -290 (Gde E-165) complete all as specified and as directed.

S&F mild steel plate girder or single stanchions, built up of one beam or channel section with flange plate, caps, bases, spices, angle, brackets, cleats and other connection complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone agg.) as in sub base of flooring complete all as specified and as directed.

Machine pressd precast concrete Interlocking paver block any shape and size made of M -35 grade conc. (with grey cement and no pigment) of 60 mm thickness with 6 mm top layer of anti abrasive material laid over 25 mm thick (compacted) fine sieved sand complete all as specified and as directed.

Taking down carefully existing points wiring on surface conduit/ concealed conduit for light/ fan/ socket/power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, peace of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and as directed.

M & L for point wiring with 1.5 sqmm copper conductor cable (multistrand) FRLS single core PVC insulated cable for one light/ fan point in existing conduit, terminated in sunken/ pressed metal flush box with and including modular cover plate & frame for mounting of switches/ sockets / fan regulators etc and continuous earth wire 1.5 sqmm copper cable PVC insulated FRLS controlled by one switch for one light/ fan/ sockets/ bell point complete all as specified and as directed. Note : (i) Eye/ bottle thimbles shall be used for connection in switches/ sockets and MCB's in DB's without any extra cost. (ii) Electric rewiring should be done in proper colour coding i.e Red for phase, Black for neutral and Green for earth. (iii) Necessary cutting chasing, PVC conduit wherever required and making good the disturbed surface shall be part of job at no extra cost

All as per Sl item No 124 here in before but for one 5Amp socket point on independet board complete all as specified and as directed.

All as per Sl item No 124 here in before but for one 5pin 5Amp socket point on same board but with other switches complete all as specified and as directed.

All as per Sl item No 124 here in before but for one socket out let 5 pin 5 Amp independent with 2.5 sqmm PVC insulated and unsheathed FRLS single core multi-stranded copper earth continuity complete all as specified and as directed.

Modular Switch 1 way 6A 1module type complete all as specified and as directed.

Modular Bell switch 1 way, 6 amp, 1 module complete all as specified and as directed.

Modular switch 1 way, 16 amp, 1 module complete all as specified and as directed.

Modular socket 5 pin 6 Amps , 2 module complete all as specified and as directed.

Modular socket 5 pin 6/16 Amp, combination type 2 module complete all as specified and as directed.

S&F in repairs fan regulator 120 W modular type 2 module complete all as specified and as directed.

Ceiling rose surface bakelite surface 65x50 mm 3 treminals all as specified and as directed.

S&F in repairs bell ding dong type electronic complete all as specified and as directed.

Decorative wall mounted LED light fitting suitable for 9 watt lamp B22 base (with and including LED lamp 9 to 12 watt) Cat Part No LHFOFTE1TZ1W012 of Havells or equivalent in Makes as per Appendix B complete all as specified and as directed.

Decorative ultra slim tube light fitting, with extruded polycarbonate body envornmental friendly, energy efficient, 4 ft long including 3 core flexible wire 0.5 sqmm copper cable connection with ceiling rose complete all as specified and as directed. Cat Part No LHEXBLP7PN1W020 of Havells or equivalent in Makes as per Appendix B

Surface mounted decorative LED Bulk head back lit luminaire of cap 10 W with comprising ofhigh brighness LEDs and connection with flexible wire 0.5 sqmm copper cable complete all as specified and as directed. Cat Part No HEXAFT10WLED857SSYMBOPC of Havells or equivalent in Makes as per Appendix B

Decorative LED light fitting, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable for 9 W LED lamp B22 base (with and including LED lamp 9 to 12 watt) & connection with flexible wire 0.5 sqmm copper cable complete all as specified and as directed. Cat Part No LHFOAJE1TN1IO60 of Havells or equivalent in Makes as per Appendix B

Taking down and refixing of ceiling fan after necessary cleaning painting marking serial No complete all as specified and as directed.

S&F in repairs sheet metal enclosure for DB's when MCB/ MCCBs are to be used, double door, powder coated, with 200 Amps rated bus bar and commom netural link SPN 8 ways with IP54 protection, flush mounted with wall and making good to match with existing wall surface complete all as specified and as directed. NOTE: Connections of wire with MCB shalll be done with apppropriate size of eye/ bottle thimble of brass/ cooper.

All as per item 141 here-in-before but SPN 6 ways

All as per item 141 here-in-before but TPN 4 ways

All as per item 141 here-in-before but TPN 8 ways

MCCB, 4 Pole, 63 A, 16 kA thermal and magnetic release protection type for fixing in DB including prpoer thimble connection complete all as specified and as directed.

MCCB, 4 Pole, 100 A, 16 kA thermal and magnetic release protection type for fixing in DB including prpoer thimble connection complete all as specified and as directed.

MCCB, 4 Pole, 125 A, 25 kA thermal and magnetic release protection type for fixing in DB including prpoer thimble connection complete all as specified and as directed.

MCB, SPN, 240 V, 6-32 Amp 'B' curve for fixing in DBs including proper thimble connections complete all as specified and as directed.

MCB, SP, 240 V, 6-32 Amp 'B' curve for fixing in DBs including proper thimble connection complete all as specified and as directed.

Supply and replace sub main wiring with two single core 4.0 sqmm PVC insulated and unsheathed FRLS, stranded copper conductor cable drawn through existing concealed conduit including one 4.0 sqmm PVC insulated and unsheathed FRLS, stranded copper conductor cable as earth wire complete all as specified and as directed. NOTE: Necessary cutting chasing, PVC conduit wherever required and making good the disturbed surface shall be part of job at no extra cost

All as per item 150 here-in-before but with two single core 6.0 sqmm PVC insulated and unsheathed FRLS, stranded copper conductor and one 6.0 sqmm PVC insulated and unsheathed FR stranded copper conductor cable as earth wire.

M&L earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with15mm bore GI light grade protection pipe and 20mm bore GI medium grade watering pipe, charcoal & common salt in alternate layers all as per electrical plate No 5 of SSR Part-I including PCC 1:2:4 type B-1 using 40mm graded stone aggregate CI cover and frame including all excavation and earth work and connected to earting test point and testing on completion including taking out serviceable materials from existing earthings complete all as specified and as directed.

S&F in repairs Sheet metal enclosure suitable for fixing electric meter, factory made of size 12x 12 x 10 cm made out of 2 mm thick MS sheet including suitable locking arrangment , power coated, cutting chasing in wall, fixing and making good as per existing surface complete all as specified and as directed.

S&F in repairs Single pole and neutral Sheet metal enclosure (industrial socket) with a two pin and earth plug socket for AC, with one single pole MCB 16 to 20 Amp, 240 Volts complete all as specified and as directed.

S&F in replacement new generation energy saving and environmental friendly long life LED building security light 30 watts made up of pressure die cast aluminium housing with all accessories including suitable braket with 32mm bore light grade GI pipe bend to shape, including MS clamp of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fitting complete all as specified and as directed. Cat Part No LHEXAYP7PN6K030 of Havells or equivalent in Makes as per Appendix B

S&F in replacement IP 55 surface mounted LED porch light 12 watt decorative slim surface panel with square surface accessories complete all as specified and as directed. Cat Part No for light fitting LHEAABP7IN1W012 & for accessories LSSLNW0131 of Havells or equivalent in Makes as per Appendix B

S&F in replacement LED 15 watt post top P-65, new generation, energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminaire with high power LEDs as light source duly connected with control switch including cost of masonary work for fixing of light on gate pillars on suitable size GI tubing duly silver painted including and making good to match with existing surfaces complete all as specified and as directed. Cat part No. RUBYMINIPT15WLED757PSYMTOPC of Havells or equivalent in Makes as per Appendix B

Returning filling in including spreading , levelling, and well ramming in layer n exc. 25 cm each layer of any kind of soil complete all as specified and as directed.

Removing surplus excavated material from site n. exc. 50 m from starting point and deposting where directed at level not exc. 1.5 m avobe the starting point complete all as specified and as directed.

Sand cushioning (dry sand) to underground cable for cable protection 23 cm thick in two layers (8 cm thick before laying of cables and 15 cm thick after laying the cable and punning down the sand to 18 cm thickness complete all as specified and as directed. (Note:- Only punned thickness 18 cm of sand shall be measured for payment purposes).

Cutting of hardstanding floor/ wall for laying of cable including matching with surface by using cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) complete all as specified and as directed.

Boring of holes under road, pavement, hardstanding by trenchless technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and as directed.

M&L for precast concrete cable cover class LV type 1, flat, size 250mmx 150mm x 40mm laid dry in trenches for cable protection complete all as specified and as directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the foor, along the wall or along the pole complete all as specified and as directed.

XLPE insulated, screened, PVC beded, galvanized steel wire armoued, electric, power cables (heavy duty) 1100 V grade with stranded aluminum conductor of size 25 sqmm 4 core supplied & laid in replacement complete all as specified and as directed.

XLPE insulated, screened, PVC beded, galvanized steel wire armoued, electric, power cables (heavy duty) 1100 V grade with stranded aluminum conductor of size 16 sqmm 4 core supplied and laid in replacement complete all as specified and as directed.

PVC single core aluminum cable sheathed 6 sqmm size, 240 V grade all as specified and as directed.

PVC single core aluminum cable sheathed 10 sqmm size, 240 V grade all as specified and as directed.

M/S RAJ KUMAR GUPTA

Shree Construction Co.

M/s R.N Construction Co.

R D Bansal

M/s MAKHAN ENTERPRISES

Standard Const. Co.