Carryout the Renovation works in TNCSC godown campuses at Vellanur, Avudaiyarkoil, Aliyanilai, Alangudi, Gandarvakottai and Kulathur in Pudukottai District

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC godown campus at Vellanur Village in Pudukottai Taluk and District. Thorough scrapping of old plastered surface with soap, soda and water (or with soda lime, brush and water)

Servicing the rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Carryout the Renovation works to TNCSC godown campus at Aliyanilai Village in Aranthangi Taluk , Pudukottai District. Thorough scrapping of old plastered surface with soap, soda and water (or with soda lime, brush and water)

Plain Cement Concrete 1:2:4(one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall etc.

Servicing the rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long etc. Complete

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Carryout the Renovation works in TNCSC godown campus at Pachikottai Village in Alangudi Taluk, Pudukottai District Thorough scrapping of old plastered surface with soap, soda and water (or with soda lime, brush and water)

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Servicing the rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Dismantling pressed tiles and weathering course and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed

Carryout the Renovation works in TNCSC Own godown campus at N.Pudupatti Village in Gandharvakottai Taluk, Pudukottai District Thorough scrapping of old plastered surface with soap, soda and water (or with soda lime, brush and water)

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class Chamber burnt Bricks of size 9”x4 3/8 x2 3/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In foundation and basement

Servicing the rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Carryout the Renovation works in TNCSC godown campus at Kulathur Taluk in Pudukottai District Thorough scrapping of old plastered surface with soap, soda and water (or with soda lime, brush and water)

Plain Cement Concrete 1:2:4(one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall etc.

Servicing the rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Carryout the Renovation works in TNCSC godown campus at Avudaiyar Kovil Taluk in Pudukottai District Through scrapping of old plastered surface with soap, soda and water (or with soda lime, brush and water)

Plain Cement Concrete 1:2:4(one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall etc.

Servicing the rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long etc. Complete

V ANANDHAN