REPAIR TO PCC FLOOR, KOTA STONE, FLOOR AND TILES IN OFFRS ENCLAVE, OFFICER MESS AND TMQ AREA AND TECH AREA AT 24 ED AF STN MANAURI

Amount

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement all as specified and directed.

M & L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer complete all as specified & directed.

M & L rendering 15 mm thick in cement plaster 1 : 4 with WPC (@ 3%by weight of cement) on fair faces of brick wk or concrete surface finishing the surface even and fair complete all as specified & directed. Note:- WPC shall be measured & paid seprately.

Supply only intergal water proofing complete all as specified & directed.

M & L for preparation of new surface of wall including cornices and apply two coat of cement based paint complete all as specified & directed.

M & L for preparation of new surface of wall including cornices and apply three coats of white wash complete all as specified & directed.

Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified & directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified & directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate , finished even and smooth with using extra cement etc complete all as specified & directed.

M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished even and smooth without using extra cement complete all as specified & directed.

M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified & directed.

Dismantling stone slab floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed.

M&L 20-22mm thick (of size not less than 55cm x55cm) machine cut, pripolished , Kota stone slab in floors over 20mm thick screed bed in mix 1:6 laid and jointed with grey cement to match the shade of slab including rubbing and polishing on surfaces of any description complete all as specified & directed.

M&L pripolished Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering cement mortar 1:3 and jointed with grey cement to match the shade of slab including rubbing and polishing on surfaces of any description, complete all as specified & directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified & directed.

M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified & directed.

M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified & directed.

M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified & directed.

M&L glazed ceramic coloured tiles 300mm x 200mm x 6to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified & directed.

M&L joint free coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L joint free coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles match over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

Fixing only in repair wash down water closet (Pedestal pattern), complete all as specified & directed.

Fixing only in repair Gratings, complete all as specified & directed.

Dismantling of cement concrete tiles/designer tiles of any desciption and any thickness in floors, laid, bedded and pointed in any mortar complete all as specifed and directed.

M&L providing chequered cement concrete coloured tiles glossy finish 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment laid over and including screed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed.

M&L exterior grade heavy duty full body outer designer parking tiles 400x400x10mm, in floors etc. of colour and design as approved by Engr-in-Charge, set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing one including 15mm thick screed bed in CM 1:6 complete all as specified & directed. Make: Kajaria / Orient bell / H&R, Johnson or equivalent.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.

M/s Vivek Traders (BID ID -3154610)

Shree Ram Enterprises (BID ID -3154453)

HARSH ASSOCIETES (BID ID -3154442)