Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.8 LAdmitted-Finance | -1.80% | ₹4.8 L | L1 | Admitted-Finance |
| 2 | L2₹4.9 L+₹8,819.16 (1.83%)Admitted-Finance | +0.00% | ₹4.9 L+₹8,819.16 (1.83%) | L2 | Admitted-Finance |
Tender Value
₹4.9 L
EMD Value
₹9,800
Closing Date
13 Aug 2026, 4:00 pmClosed
Executive Engineer PWD Division Poonch
Executive Engineer PWD Division Poonch
Addition Alternation Repair Renovation of PWD R and B Division Poonch
2026_PWDJK_318928_5
e-NIT No.65/2026-27 dated 01-08-2026
Open Tender
Civil Works
Percentage
45 days
Poonch
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
Yes
Executive Engineer PWD Division Poonch
₹9,800
Yes
21 Aug 2026
1 Aug 2026
14 Aug 2026
1 Aug 2026
13 Aug 2026
1 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. | 59.5 | Cum | 189.2 | ₹11,257.4 |
| 2 | Providing and fixing 16mm thick gang saw cut, mirror polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar plain white marble/Udaipur green marble/zebra black marble. (Area of slab over 0.5 sqm) | 1.86 | Sqm | 3,455.2 | ₹6,426.67 |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood | - | Cum | 1,42,085.65 | - |
| 4 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood | 3.35 | Sqm | 3,201.8 | ₹10,726.03 |
| 5 | Providing and fixing 12mm thick specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or
studding to be paid separately) :Flat pressed 3 layer particle board or graded wood particle board IS:3087 | 14.9 | Sqm | 603.05 | ₹8,985.45 |
| 6 | Providing and fixing 30mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws.Second class deodar wood | 1.1 | Sqm | 4,031.35 | ₹4,434.49 |
| 7 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood | 1.25 | Sqm | 3,797.4 | ₹4,746.75 |
| 8 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
100x75x4 mm | 10 | Each | 116.2 | ₹1,162 |
| 9 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm | 10 | Each | 251.95 | ₹2,519.5 |
| 10 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm | 10 | Each | 83.8 | ₹838 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
Tendernotice_2.pdf
PDF • 0.92 MB
BOQ_1054159.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .