ATTN/ ALTN TO OR LIVING ACCN BLDG NO O-1(R), PROVN OF SHED WITH FLOORING, ASSOCIATE WORK AT BLDG NO O-6 AND SPL REPAIR TO PAVED SURFACE ALONGWITH ALLIED SERVICES IN FRONT OF ALBERT EKKA AUDITORIUM AT INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

(B/R PORTION) Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and labour for 20 mm thick rendering in cement mortar (1:4), in two layers, each 10 mm thick, to fair faces of brick or concrete wall surfaces, top layer mixed with water proofing compound (@ 3 % by weight of cement or as per manufacture's instructions), finished rendering surface even and smooth(without using extra cement complete all as specified and directed.. (Note : Water proofing compound to be measured and paid separately as "Supply only")

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 on concrete as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supplying Integral water proofing compound.

Excavation in trench not exceeding 1.5 M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar 1:4 on bricks or concrete surface and finished even and smooth without using extra cement including necessary scaffolding work complete all as specified and directed.

M & L two coat of oil bound distemper on newly plastered surface of wall, by brush and roller including over of one coat white chalk on wall complete all as specified and directed.

M/L for complete removal of existing treatment, washing, rubbing down and stopping of painted/treated surfaces and applying two coat of oil bound distemper by brush and roller including over one coat of chalk whitening on wall complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed.

M & L two coats of cement based paint on old surface of wall including preparation complete all as specified and directed.

M & L two coats of cement based paint on newly plastered surface of wall including preparation and one coat of chalk white of surfaces complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description/new over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Demolition of cement Concrete(reinforcement cut as required to facilitate demolition) Roof, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed.

M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and columns in floor, roof landing,, balconies, conopies, deck slab and shelves etc complete all as specified and directed.

Use and waste of formwork to sides and soffits of suspended slabs, floor slab, landing and similar work n. exc. 200 mm thick rough finished on flat surfaces of concrete complete all as specified and directed.

S & F mild steel deformed bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic colour tiles of area of each tile exc 0.06 Sqm but n exc exc 0.11 Sqm and 6 to 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed.

M & L glazed ceramic colour tiles size 450 mm x 300 mm x 6 to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement including 10 mm thick plastering in cement mortar 1:4 complete all as specified and directed. to match complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer of mortar as in backing coat of stone on fair face of brick wall or concrete surface in cement mortar 1:4 complete all as specified and directed.

M & L 18 to 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars, window cills, cooking plate from and similar places etc like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling cast iron work of any description complete all as specified and as directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete as in repair, all as specified and as directed.

Demolition of cement concrete (un-reinforced) not exc 15cm thick in ground floor and paving (below or above ground level) complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

S&F, Powder coated aluminium sliding window with shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mm x 44mm x 1.5mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge. Note: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be measured separately.

S & F powder coating of any colour (Thickness or powder coating not less than 50 micron). Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F factory made single extruded WPC (Wood polymer composite) solid door/ window / ceosetory windows & other frames/chowkats of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

Supply & fixing 30 mm thick 2nd class hard wood Skelton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of menbers of shutters as specified in SSR Part-I, Section 8.24(b) complete all as specified and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed.

S & F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 4 mm thick Frosted plain glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed.

Supply & fixing 100 mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.

S & F aluminium handles 150 mm long cast type, anodised complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.

S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

M & L floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150 mm complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed.

S & F mild steel work as in holdfast made out of flat iron any size including necessary welding or fixing nuts and bolts complete all as specified and directed.

S &F framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barried iron doors ladders framed balusters, walk ways, railing framework of water tanks and similar work conforming to Fe.290 Gde E-165 complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repairs vitreous china white colour wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including bracket and flush pipe complete all as specified and directed.

S & F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 15 mm bore bib taps fancy type, chromium plated cast copper alloy, high pressure screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair stop valve fancy type suitable for 15 mm bore of pipe fancy type chromium plated ,high pressure with crutch or butterfly handle, screwed bath ends for for iron pipe or for unions ( concealed type) complete all as specified and directed.

S & F in repair 100 mm dia brass chromium plated over OH shower rose with arm and wall flange including fixing to steel pipe or union, complete all as specified and directed.

S & F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed.

S & F PVC connection 15 mm dia 600 mm long with brass fly nut at both ends complete all as specified and directed.

S &F as in repair PTMT grating 100 mm dia fixed with whole cement complete all as specified and directed.

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) soil pipes single socketed in any length with rubber ring joints laid in floors complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius equal or unequal fixed to soil pipes complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl fixed to soil pipes complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and fair without using extra cement complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed concealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . Make: KILOSKAR - ETERNA, Model SJPBS 42420- HL or equivalent model make specified in tender.

S & F 5.0 mm thick Toughned glass good quality as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surfaces in soft/loose soil all as directed.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

S&F tensile febric 900 GSM of mini weight 750 gm/m2-ENISO 2286-2 Standard format length -50m -300m tensile strength (warp/weft-30/28 daN-DIN 53.363 finish as per formula S2 fluorinate varnish weldable solar transmission-13.5% etc with 10 year of fabric cracking and pesting warranty fixed with self tapping screws as specified.

M & L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M& L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Material and labour for brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified and directed.

M&L non skid endure joint free colour Floor tiles 15-16 mm thick area of each tile exc 0.18 Sqm but n exc exc 0 .36 Sqm and 15 mm thick, etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed.

M&L non skid endura joint free colour tiles 15-16 mm thick for Vertical surface of area of each tile exc 0.18 Sqm but n exc exc 0 .36 Sqm and 15 mm thick, etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 10 mm thick rendering cement mortar 1:3 complete all as specified and directed.

M & L glazed ceramic colour tiles size 450 mm x 300 mm x 6 to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement including 10 mm thick plastering in cement mortar 1:4 complete all as specified and directed. to match complete all as specified and directed.

M & L glazed ceramic stone texture colour tiles size 600 mm x 300 mm x 6 to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement including 10 mm thick plastering in cement mortar 1:4 complete all as specified and directed. to match complete all as specified and directed.

M & L for repairs to pot holes depth not exc 30mm and n exc 1 sqm area each incl sweeping free from dust and mud or water scoring sunken surface in roads, paths etc. cutting around edges at least 25mm in depth making good by applying tack coat of bituminous primer VG-10 at @ 5 kg/X sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 cum of store chipping, 6.3 mm size and again well rammed ( incl supply of premixed macadam, binder and chippings) complete all as specified and directed.

M&L for preparation existing black top surface by brushing with wire brushes for removing crked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for preparation applying evenly a priming/ tack coat with bituminous primer VG-10 @ 5 Kg Per Sqm incl preparation of surface complete all as specified and directed.

M&L for applying a tack coat over existing bituminous surface @ 0.50 Kg/Sqm of VG-30 bitumen and providing and laying 20 mm thick bitumen mastic asphalt on prepared surface strictly in accordance with IS specification No 5317-2002 ( as latest Modified) with mastic i.e. bitumen of grade VG-30 @ 4.5 Kg/Sqm (Minimum) mixed with stone dust ( lime stone powder with calcium value 80%@0.008 Cum and sand chipping of size 12.5 mm and 10mm@ 0.0096 cum/Sqm and sand @0.004 Cum per Sqm and inserting stone graded of 22 mm size with 0.017 Kg of 20/30 bitumen per Sqm for anti skidding including all tools and plants etc complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

(E/M PORTION) Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

M & L for concealed type point wiring with 1.50 sqmm (nominal area) FRLSH insulated and unsheathed muld stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/celling including muld steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point controlled by one way switch complete all as specified and directed.

All as per item No 91 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 91 above 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No 91 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Blank plate, 1 module complete all as specified and directed

S & F Modular type White cover plate with frame 3 module complete all as specified and directed

S & F Modular type White cover plate with frame 4 module complete all as specified and directed

S & F Modular type White cover plate with frame 6 module complete all as specified and directed

S & F Modular type Metal Flush box 3 module complete all as specified and directed

S & F Modular type Metal Flush box 4 module complete all as specified and directed

S & F Modular type Metal Flush box 6 module complete all as specified and directed

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S & F exhaust fan 250 mm sweep, AC single Phase 230 / 240 volts, metal body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia ,nut bolt and accessories, and winding, pending etc connecting up including taking down with re -fixing provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

S & F ceiling fans complete with all accessories 230 volt single phase 1200/1400mm sweep with down rod any size , canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

Supply and fix Wall mounted fan, PVC body AC single Phase. 230V of size 450m sweep Airboll high speed complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 15 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.

Supply and Fixing in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor (multistranded), 1100 volts grade connected with suitable cable gland and aluminium lugs of any size laid in trenches or passing through pipes including testing after laying, including taking up old UNSV cable complete of 16 Sqmm, 4 Core size complete all as specified and directed.

Supply and Fixing in replacement of following GI pipe light grade (ISI Marked) for cable protection along wall/pole/floor/road crossing etc complete including sealing of pipe ends with approved sealing compound including taking up old UNSV GI pipe of 50mm dia complete all as specified and directed .

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed all as directed.

All as per Srl. Item No. 114 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No. 114 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

S&F metal clad box enclosure with socket plug top and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket complete all as specified and directed.

Taking down of Old MCB DB any type any size including MCBs etc complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and directed.

S & F MCB 'C' curve single pole neutral , 32 Amps with breaking capacity 10kA, complete all as specified and directed. Cat no.408617 make: Legrand or equivalent make specified in tender.

S & F MCB 'C' series single pole 5 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Cat No. 408587, Make: Legrand or equivalent make specified in tender.

S & F TP&N Vertical Loadline Dbs are fitted with Bus Bars, Neutral Links, Blanking Plates 4 way double door DB LL 4W DD VERT W/O MCCB complete all as specified and directed.

S & F MCCBs 415V, 16KA, 4 Pole 100Amps complete all as specified and directed

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

PINKY CO. (BID ID -3139926)

DEEPAK KHATTAR (BID ID -3139515)

M/S S. K. SARKAR (BID ID -3139741)

DEB AND COMPANY (BID ID -3140029)

MAZUMDER ENTERPRISE (BID ID -3140081)

S.K. TRADERS (BID ID -3140724)

RAJ ENTERPRISE (BID ID -3141080)