PROPOSED CONSTRUCTION OF 1 BREEDER LAYER PEN HOUSE 4500 SQ FT 2 BREEDER GROWING PEN HOUSE1900 SQ FT 3 COMMERCIAL GROWING PEN HOUSE 1500 SQ FT X 4 4 HATCHERY BUILDING 3000 SQ FT 5 FEED MILL 1500 SQ FT AND 6 COMPOST PIT FOR MORTALITY DISPOSAL

Amount

Construction of (Breeder Growing Pen House 1900 Sqft , Breeder Layer Pen House 4500 Sqft, Commertial Growing pen House 1500 sqft ,Hatchery Building 3000 sqft ,Feed Mill 1000 sqft)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 1) Growing Pen House 40.60 2)Feed Mill 16.56 3) Breeder Layer Pen House 32.83 4) Breeder Growing pen 19.87 5)Hatchery 29.16

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means 1) Growing Pen House 77.76 2)Feed Mill 16.203) Breeder Layer Pen House 32.40 4) Breeder Growing pen 19.44 5)Hatchery 29.16

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page Number 263 SSR Item. No.-21.37 /Pg.-157 1) Growing Pen House 473.60 3 2)Feed Mill 118.40 3) Breeder Layer Pen House 365.58 4) Breeder Growing pen 142.02 5)Hatchery 83.70

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. SSR Item. No.-21.40/Pg.-157 1) Growing Pen House 83.56 2)Feed Mill 20.89 3) Breeder Layer Pen House 60.93 4) Breeder Growing pen 25.06 5)Hatchery 14.77

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 1) Growing Pen House 13.44 2)Feed Mill 2.82 3) Breeder Layer Pen House 6.06 4) Breeder Growing pen 3.90 5)Hatchery 19.63

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 1) Growing Pen House 30.60 2)Feed Mill 5.39 3) Breeder Layer Pen House 10.77 4) Breeder Growing pen 6.46 5)Hatchery 9.91 m3

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 1) Growing Pen House 9.32 2)Feed Mill 3.32 3) Breeder Layer Pen House 3.50 4) Breeder Growing pen 3.57 5)Hatchery 8.10

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (PWD S.S.R. 22-23 Item Serial No.851 & Item No.25.50) 1) Growing Pen House13.40 2)Feed Mill 3.36 3) Breeder Layer Pen House 14.20 4) Breeder Growing pen 3.76 5)Hatchery 15.53

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the 1) Growing Pen House 4.88 2)Feed Mill 1.13 3) Breeder Layer Pen House 2.69 4) Breeder Growing pen 1.28 5)Hatchery 3.49

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. 1) Growing Pen House 46.72 2)Feed Mill 11.68 3) Breeder Layer Pen House 37.60 4) Breeder Growing pen 13.25 5)Hatchery 17.60

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete1) Growing Pen House 11.32m3 2)Feed Mill 32.68 3) Breeder Layer Pen House 21.17 4) Breeder Growing pen 13.37 5)Hatchery 44.88

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. 1) Growing Pen House 8.40 m3 2)Feed Mill 2.10 m3 3) Breeder Layer Pen House4.20 m3 4) Breeder Growing pen 2.10 m3 5)Hatchery 175.70 m3

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR It. No. - 32.04/Pg.-209 1) Growing Pen House 57.60 m3 2)Feed Mill 88.92 m3 3) Breeder Layer Pen House 92.87m3 4) Breeder Growing pen 60.64 m3 5) Hatchery 326.92 m3

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR It. No. - 32.11/Pg.-209 1) Growing Pen House 54.96 2)Feed Mill 193.78 3) Breeder Layer Pen House 212.09 4) Breeder Growing pen 71.52 5) Hatchery 472.04

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. SSR It.No.- 35.25/Pg.-225 1) Growing Pen House 54.96 m3 2)Feed Mill 193.78 m3 3) Breeder Layer Pen House 212.09m3 4) Breeder Growing pen 71.52 m3 5) Hatchery 326.92 m3

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR It. No.- 39.01/Pg.-245 1) Growing Pen House 0.16 2)Feed Mill 0.04 3) Breeder Layer Pen House 0.11 4) Breeder Growing pen 0.04 m3 5) Hatchery 0

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) SSR It.No. - 39.04/Pg.-245 1) Growing Pen House 10.08 m3 2)Feed Mill 2.52 m3 3) Breeder Layer Pen House 6.30 m3 4) Breeder Growing pen 2.10 m3 5) Hatchery 1.89 m3

Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. SSR It.No. - 23.03 1) Growing Pen House 1 2)Feed Mill .05 3) Breeder Layer Pen House .96 4) Breeder Growing pen .25 5) Hatchery 0 m3

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 1) Growing Pen House 1.88 2)Feed Mill 1.63 3) Breeder Layer Pen House 2.62 4) Breeder Growing pen.47 5) Hatchery 1.23 SSR It.No. - 23.02

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). SSR It.No. - 38.04 1) Growing Pen House 560 2)Feed Mill 139.29 3) Breeder Layer Pen House 427.50 4) Breeder Growing pen 167 5) Hatchery270

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). SSR It.No. - 38.05 1) Growing Pen House 36.72 2)Feed Mill 13.72 3) Breeder Layer Pen House 41.40 4) Breeder Growing pen11.58 5) Hatchery 27

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. SSR It.No. - 46.39 1) Growing Pen House 367.20 2)Feed Mill 34 3) Breeder Layer Pen House 135.80 4) Breeder Growing pen 120 5) Hatchery 0 m3

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. SSR It. No. - 32.34/Pg.-212 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 92.87 4) Breeder Growing pen 0 5) Hatchery 326.92

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR It. No. - 26.05/Pg.-184 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 0 4) Breeder Growing pen 0 m3 5) Hatchery .70

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 0 4) Breeder Growing pen 0 5) Hatchery .2.40

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 0 4) Breeder Growing pen 0 5) Hatchery 98 .47

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR It. No. - 33.26/Pg.-215 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 0 4) Breeder Growing pen 0 5) Hatchery 8.46

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite SSR It.No.- 33.22/Pg.-215 1) Growing Pen House 0 m3 2)Feed Mill 0 m3 3) Breeder Layer Pen House 0m3 4) Breeder Growing pen 0 m3 5) Hatchery 1.20 m3

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. SSR It.No.- 36.13/Pg.-228 1) Growing Pen House 0 m3 2)Feed Mill 0 m3 3) Breeder Layer Pen House 0m3 4) Breeder Growing pen 0 m3 5) Hatchery326.92 m3

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. SSR It.No.- 35.25/Pg.-225 1) Growing Pen House 0 2)Feed Mill 0 m3 3) Breeder Layer Pen House 0 4) Breeder Growing pen 0 5) Hatchery 472.04

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box SSR It. No.-39.43/Pg.-254 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 0m3 4) Breeder Growing pen 0 5) Hatchery 5.76

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR It. No.- 39.68/Pg.-259 1) Growing Pen House 0 m3 2)Feed Mill 0 m3 3) Breeder Layer Pen House 0m3 4) Breeder Growing pen 0 m3 5) Hatchery .54 m3

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR It.No. - 39.09/Pg.-246 1) Growing Pen House 0 m3 2)Feed Mill 0 m3 3) Breeder Layer Pen House 0m3 4) Breeder Growing pen 0 5) Hatchery 7.35

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR It.No.40.01/Pg.-264 1) Growing Pen House 0 2)Feed Mill 0 3) Breeder Layer Pen House 0 4) Breeder Growing pen 0 5) Hatchery8.64

PLUMBING

PLUMBING 75mm pvc pipe superime or any other ISI mark

50mm pvc pipe superime or any other ISI mark

25mm pvc pipe superime or any other ISI mark

25mm pvc bent superime or any other ISI mark

25mm pvc T superime or any other ISI mark

Solvent for pvc pipe connection

Plastic water tank sintex or any other ISI mark

25mm pvc tab

75mm pvc cock superime or any other ISI mark

ELECTRIFICATION

Electrification - sub-meter L & T or any other ISI mark

Service cable 4mm ISI mark

pvc 25mm pipe paras /suparime or ISI mark

pvc 25mm bent ,T, paras /suparime or ISI mark

2.5MM cable polycap/R.R.cable or any other ISI mark

Insulating tape

Light 20 vat

ROYALTY CHARGES

Royalty for Sand

Royalty for murum and Other material

QUALITY CONTROL & LAB TESTING

M20 CONCRETE: Mix Design with all tests on basic materials

M20 CONCRETE: Concrete cube compressive strength

M-10 -concrete cube compressive strength (set of 3 cubes)

BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks)

TMT STEEL : Yield Stress, Ultimate Tensile Stress, Elongation, Weight per running meter.

Sand :- i) Fineness Modulus, II) Silt content

Murum :- ii) Atterberg Limit

iii) Density of compacted layer

iv) Proctor Test

Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess

Metal-Water absorption,specific gravity,impact value,crushing value

Metal- gradation

Metal- Combined flakiness & elongation of single meter

Earth work -gradation

Moisture content prior to compactor

Density of compacted layer

Earthwork-Proctor Test

Basic test for aggregates,water absorption specific gravity ,impactvalue/crushing value and gradetion for G-1 & G-2 Metal

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

AMIT MADAN JADHAO (BID ID -6682601)