AGE I CGN 06 25 26 PROVN OF 01 METER HEIGHT WALL WITH FIXATION OF CONCRETE JALI AROUND THE PGT HUT, PROVN OF 03 ENCLOSURES WITH DOOR AND STORE ROOM IN PGT GROUND SHED AT SECTOR-62, NOIDA UNDER AGE (I) CG NOIDA

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store.

M&L PCC 1:4:8 type D2 using 40 mm graded aggregate in Foundation filling and mass concrete/ Bed concrete

M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified.

Providing precast Type B0 cement concrete louvres and jallies,45mm thick (measured solid), including frame and all mould- ings set in CM 1:4 as directed by Engr-in-Charge

M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for preparing plastered or un plastered NEW surface of walls and applying two coats of Cement base paint and priming with alkali resistant priming paint on walls.(Externally)

M&L for applying two coats of oil bound distemper on NEWLY plastered or RCC surfaces of wall including preparation of surfaces complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Quoted rate is inclusive of M.S. hold fast/ lugs or SS dash fasteners). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges and necessary SS screws shall be paid separately

S&F SS, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S&F SS barrel tower bolts extruded section of size 150 mm long , all as specified and directed

S&F SS handle extruded fabricated type anodised of size 150 mm complete all as spd and directed.

S&F SS 100mm medium weight cold rolled butt hinge.

M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in cm (1:4) complete all as spd.

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in coping , benching, haunching including all necessary form work complete all as spd.

M&L for old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4) complete

S&F for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips.

M&L for form work to soffits of suspended slabs such as roof slabs,shelves, floor slabs etc ,landing and similar work, not exc 200mm thick (horizontal or sloping ) for fair finish surface all as spd.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

M & L (Nominal mix) in (1:2:4) Type B-0, 12.50mm aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Demolition of cement concrete (unreinforced in ground floors & paving,s n.exc 15 cm thick (below or above ground level)

Shri Radhey Associates (BID ID -3310825)