Construction of Food Stall at Ghoghla Beach, Diu (4th Call)

Amount

Works

(A) Civil Works:- Dismentling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Demolition and disposal of unserviceable materials with all lead and lift (i) Cement concrete.

Excavation for foundation up to 1.5 m depth including sorting and stacking of useful materials and disposing of the excavated stuff up to 50 Meter lead,(Al Loose or soft soil.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with Rubble soling in layers of 20cm. thickness including watering, ramming and consolidating. etc. complete.

Providing and laying cement concrete. 1:2:4 (1- Cement : 2- Coarse sand. : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M25 and curing complete Including the cost of form work but excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled' cement concrete M25 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, up to floor two level.

Providing and laying controlled cement concrete M25 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever up to floor two level.

Providing and laying controlled cement concrete M25 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in (B) Walls, from top of foundation level up to floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete up to floor two level.

White Stone Bela masonry block in course in Foundation & Plinth with stone of approved quality in cement Mortar 1:5 (I-Cement :5- course sand) including packing the joints etc. complete.

White Stone Bela masonry block in course in Super structure with stone of approved quality in cement Mortar 1:5 (I-Cement :5- course sand) including packing the joints etc. complete.

White Stone Bela masonry work in partition walls up to l5cm thickness in cement Mortar 1:4 (1- Cement: 4-course sand).

Providing 20mm. Thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1 : 3 (1-cement : 3-sand).

Washed Pabble stone plaster on exterior walls height up to 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 pabble stone 8 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, sample make and approved with consultant complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately).

Providing and laying Riverwash Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.15 (t-time putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc.. complete. (A) 25mm thick

Flooring and Tiling work Cobble (Granite): Providing and Laying of cobble stone as per design for Vehicular movementos size 100 x 100 x 100 MM and fixing with cement mortat (1:4) of thickness 25mm on over p.c.c. surface. As directed by the Engineer in charge

Providing and laying 18 mm thick polished Granite stone machine cut in single piece (max. available) in Flooring, Dado, Sill and jambs of door, window, ventilation, wall cladding & Dado laid over 10 mm thick cement mortar 1 : 3 (1-cement : 3-coarse sand) and jointed with grey cement slurry with matching pigment including rubbing and polishing half rounding edge etc. complete colour and shed as approved by Architect Engineer in charge.

Providing and laying Sandwich type Granite platform including supplying and fixing granite 18 mm thick mirror polished 1st quality Granite stone in top and side position and vertical strip at front over 25 mm thick polished kotah stone platform fixing in top and sides and itermediates supports fixing with cement mortar and adhesive and finishing including cutting for fixing of sink any size (as directed by engineer-in-charge) at required position etc complete.

Providing, laying and jointing in true line and level 25mm dia. U.P.V.C. pipe (SCH-40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib tap. (i) 15mm dia.

Providing and fixing pillar tap capstan head screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing brass screw down stop tap. (A)15mm dia.

Providing and fixing chromium plated bottle trap with necessary couplings of approved quality for washbasin.

Providing, laying and jointing in true line and level 160 diameter U.P.V.C (Type B) conforming to IS 13592-1992, with one end plain and other end socketed with rubber ring, & fittings conforming to lSI 14735-1999 approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant pipe shall be fixed on wall using of PVC clamp of the size 160 mm diameter x 210 mm length x 196 mm heigh at ·every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diameter U.P.V.C (Type B) conforming to IS 13592-1992, with one end plain and other end socketed with rubber ring, & fittings conforming to lSI 14735-1999 approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant pipe shall be fixed on wall using of PVC clamp of the size 160 mm diameter x 210 mm length x 196 mm heigh at ·every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and water tight C.I. cover with frame of 300mm X 300mm (inside) with standard weight.(i) Square mouth traps. (A) 100mm X 100mm size P type.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix [I-cement :2-coarse sand : 4"graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1 -cement: 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 [I-Cement : 3-cciarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (I-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and l.SM. deep including c.l. cover' with frame size 560rnm diameter total" weight of cover and frame to be not less than 128 kgs, (Wt. of cover Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick. walls of brick msonry using brick having crushing, strength not. less than 3SKg. [: Sq.cm. in Cement Mortar 1:5 (1-. Cement: 5-Coarse sand) (2). B type depth 1.50 'Metre for 150mmdiameter sewer.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or hinged grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. ( C ) 100mm. dia

Providing sock pit of 5.00 Cum. Volume including excavating and filing brick bats with dry masonary work at top for 45cm. Height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Providing & Fixing SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size 610x460 mm & bow! Size

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China.(ii) Flat Back washbasin 550mm X 400mm size. (i) in white colour.

Providing and fixing 25 mm thick shutters for cupboards etc. including anodlsed alluminium butt hinges with necessary screws, (A) Indian teak wood. (il Fully Panelled.

(B) Fabrication works for Bamboo:- Providing for bamboo works for food stall namely re-erecting the components pre-fabricated for the purpose, with minor adjustments like cutting, sizing, replacing the damaged bamboos inclusive of all labour costs only, including the cost of bamboos, required hardware for fixing structural bamboos together. Structural Bamboos For Connecting The Main Structural Components, Including All Charges For Conveyance And Labour Charges, Complete For Finished Item Of Work. Providing with treated structural bamboos, for the structural purpose of erection of the bamboo structure namely, columns, rafters, horizontal beams, grid beams, bracing supports etc. Providing Polish To All The Bamboos For Structure And As Well As To The Secondary Structure, Including The Cost Of Labour, Brushes, Base Preparation Etc With All Cost For Conveyance Etc Included, Complete For Finished Work Item. Providing and fixing With Hardware Required For The Jointing, Fixing, Bending, Erecting For The Main Bamboo Structure, Including The Cost Of Ss Threaded I-Bolts, J-Bolts, Grub Bolts Of 8/10mm Diameter, Steel Plate At The Joints Of Bamboos, Filling The Bamboo Joints Upto Minimum Two Internodes, Curing, Nuts And Dome Nuts (Ss) And Required Washers, Inclusive Of All Cost And Conveyance Charges, Complete For Finished Work. Provision for roof top with 3 mm thick FRP sheet all across the roofing surface, inclusive of complementary materials, labours and transportation. Use of Bamboo: Large diameter bamboo which is Aasam Bamboo ( 50 mm to 100 mm diameter ) and small diameter bamboo which is Govagiri , Manvel and Laathi ( 25 mm to 75 mm diameter). All bamboo used will be CCB chemically Treated as per direction of Engineer-in-charge. (A) Roof Structure

Description For Bamboo Roofing Bamboo Roofing Work Procuring, Fabricating, Supplying & Installing in Position for Bamboo Roof Consisting of Following: CCB Treated Falttern Bamboo for Top and Bottom Layer of Bamboo Roof Along With 2 Mm Bituminous Based Sheet In Between Two Layers of Flattern Bamboo as Per Specification Provided in Drawing. Providing And Fixing Proper Hardware Items Like Ss Roads, Screw, Wire for Fixing the Flatten Bamboo, And Bituminous Based Sheet Etc. Providing Polish Work to All the Flattern Bamboo Both Top and Bottom with Specified Polishing Material Inclusive of All Cost of Conveyance, Transportation Labour Work and Inclusive of Other Required Complementary Material. Description For Bamboo Food Stall. Provision For Bamboo Works For Food Stall Namely Erecting The Components Pre-Fabricated For The Purpose, With Minor Adjustments Like Cutting, Sizing, Replacing The Damaged Bamboos Inclusive Of All Labour Costs Only, Including The Cost Of Bamboos, Required Hardware For Fixing Structural Bamboos Together 1.1 Structural Bamboos For Connecting The Main Structural Components, Including All Charges For Conveyance And Labour Charges, Complete For Finished Item of Work 1.2 Providing With Treated Structural Bamboos, For The Structural Purpose Of Erection of The Bamboo Structure Namely, Columns, Rafters, Horizontal Beams, Grid Beams, Bracing Supports etc. 1.3 Providing Polish To All The Bamboos For Structure And As Well As To The Secondary Structure, Including The Cost of Labour, Brushes, Base Preparation Etc. With All Cost for Conveyance Etc. Included, Complete for Finished Work Item 1.4 Providing with Hardware Required for The Jointing, Fixing, Bending, Erecting for The Main Bamboo Structure, Including the Cost of Ss Threaded I-Bolts, J-Bolts, Grub Bolts Of 8/10mm Diameter, Nuts and Dome Nuts (Ss) And Required Washers, Inclusive of All Cost and Conveyance Charges, Complete for Finished Work (B) Roofing

(C) Electrification Works:- Point wiring for Light/ Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ ceiling complete with 6A Modular type switch/ bell push & accessories and earth continuity of following type, erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose/ H.D. Connector as directed. with medium class Rigid PVC pipe and accessories Cat.III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ flushed on wall/ ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected. with necessary ceiling rose/ H.D. Connector as directed. with medium class Rigid PVC pipe and accessories Cat.III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling with following type accessories Cat.III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling as per pipe erected with following type of accessories. For 6A Plug with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories Cat.III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling as per pipe erected with following type of accessories. For 16A Plug with 2-2.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories Cat.III

Providing following type of Modular Type Accessories mounted with pvc/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection. As desired by Engineer In charge. Blank Plate Single Cat.III

Providing following type of Modular Type Accessories mounted with pvc/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection. As desired by Engineer In charge.16 Amp. SP one way switch Cat.III

Providing following type of Modular Type Accessories mounted with pvc/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection. As desired by Engineer In charge.32 Amps. DP switch with Indicator Cat. III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/ in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed 20mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/ in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed 25mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in/ flushed on wall/ ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories 2 wire 1.5 Sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in/ flushed on wall/ ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories 2 wire 2.5 Sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in/ flushed on wall/ ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories 4 wire 1.5 Sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in/ flushed on wall/ ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories 4 wire 2.5 Sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in/ on wall/ ceiling with 2.5 sq.mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories with medium class Rigid PVC pipe and accessories 2 wire 4 Sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used) Three phase 4 way SS Double door for single phase outgoing horizontal box.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used Single phase 8 way SS Double door.

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 415V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 6 to 32 Amp. Cat.III

Providing and erecting double pole MCB isolator A.C. 22 duty confirms to IS 13947-3 240A 40A in existing box for Cat.III

Providing and erecting four pole MCB isolator A.C. 22 duty confirms to IS 13947-3 240A in existing box for 63A Amp. Cat.III

Plastic enclosure fitted with DIN rail suitable for incorporating One/ Two nos. MCB

Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. MCB

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with Aluminium busbar having current density not more than 0.8 Amp./ sq.mm (Rated current/ cross section area) duly wrapped with colour insulation tape for phase sequence, three phase & neutral each Suitable for following current capacity with necessary painting mounted on wall or pedestal frame of required size with necessary connections. Suitable for 200 Amp. Capacity

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 14930 II) with necessary connecting accessories of same material at required depth for laying of cable below ground/ road surface for enclosing cable and back filling the same to make ground as per original 50 mm dia.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.

Making trench in Hard Murrum/ Tar Road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench/ pipe of following size of cables. 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench/ pipe of following size of cables. 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench/ pipe of following size of cables. 4 core 35 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 3 & 1/2 core 35/50 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 10 Sq.mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 16 Sq.mm.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 35/50 Sq.mm.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat/ Round flexible Submersible copper cable approved make of following Size 3 Core x 1.5 Sq.mm.

Supplying & erecting earth pit of minimum bore dia. 150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For Electrical installation up to 440V in normal soil. Length of Pipe: 1.00 mtrs Back filling Compound: 1 no. Bag of 15 Kg.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ 25 mtr head suitable for 50 mm dia delivery pipe Cat.II

Supplying and erecting Direct-On-Line Starter with 18A. rating contactor and with 3.5 Amp. 18A range directly operated in totally insulated elegant enclosure for single phase operation up to 3 HP as per IS 13947 complete erected on P.W. Block with necessary connection Cat.III

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230V. 50 c/s. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge]

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers Cat.II

Providing window frame suitable for erection of Exhaust fan complete covering the remaining portion of window with 15 mm. thick plywood and colour washing to match the colour of the wall.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ 0.20, 3 core flexible wire with earthing.

Providing Fan clamp of 30 x 5 mm flat of required length & 10mm M.S. Bolt & Nuts erected with necessary hook of 10mm M.S. Round Bar.

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit run or power plug etc.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. 40Amps. FP Cat.III

Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.

Supplying, Installation, Testing & Commissioning of Decorative Galvanised steel pole with cast iron embellishment with PU paint. The pole shall be of approved make and of 3 mtr. Height including transportation, loading, unloading, GST, etc. complete as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of Post Top Lantern LED fitting comprises of Copper dust finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting, open construction driver and accessories wired upto terminal block 40W including transportation, loading, unloading, GST, etc. complete as directed by Engineer-in-charge.

Providing & fixing of 20/22W highly durable surface mounted 4ft. LED Batten constructed of fire retardant engineering grade extracted plastic and decorative end caps (CW/ WW/ NW) make: Crompton/ Philips/ Bajaj/ Surya or equivalent as directed by Engineer-In-charge. (incl. GST)

Providing and erecting approved make ELCBs / RCCBs with pvc gang box conforming to IS: 12640 and having sensitivity of 100 mA and Short Circuit with stand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed 32 Amps. DP Cat. III

Providing, Installation, Testing & Commissioning of 'AQUATEX' Domestic Pressure Boosting System Pump Kw/HP : 0.37/0.5, 1 Ph., the pressure switch monitors the pressure in the system and it will switch the pump set on and off automatically based on system demand. The system consists of high quality Pressure tank, Pressure switch, Pressure gauge, 5 Way Connector and Non Return Valve etc. completed including transportation, GST, etc. complete as directed by Engineer-in-charge.

Providing & fixing of 1 phase meter box make: Sintex as directed by Engineer-in-charge.

Release of 1 Phase Energy service connection incl. Service charges, Security Deposit, Meter Deposit & Test report, Electric Supervising charge, etc. complete as directed by Engineer-in-charge.

Release of 3 Phase Energy service connection incl. Service charges, Security Deposit, Meter Deposit & Test report, Electric Supervising charge, etc. complete as directed by Engineer-in-charge.

TIRUPATI SARJAN LIMITED