Special Repairs to Bldg No P-129/1 to 12 (Type-I Qtr) and Bldg No P-74/01, 02, 03 (Single Offr Accn) at Fazilka Military Station

Amount

SCHEDULE 'A' SECTION I (B&R Portion)

Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified and directed by Engineer - in-Charge.

Taking down chowkats with shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store all as specified and directed by Engineer - in-Charge.

Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard all as specified and directed by Engineer-in-Charge.

Refixing of shutter in other opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge.

S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge.

S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified and directed by Engineer - in - Charge .

S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and directed by Engineer - in - Charge .

Ditto Ser no-12 as above but size 75x60 mm as in cup board frames all as specified and directed by Engineer - in-Charge.

M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified.

S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

M&L 18-20 mm thick block board ,grade 2 quality ,interior grade ,decorative type with decorative face veneer on one faces including wooden beeding around the edges of board ,fixed with screws to Pressed steel frame work all as specified and directed by Engineer-in-charge.

S&F Stainless steel tower bolt 150mm long heavy duty all as specified and directed by Engineer - in - Charge.

S&F stainless steel handles of size 150mm heavy duty all as specified and directed by Engineer - in - Charge.

S&F 250mm Stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified & directed.

S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.

S & F 75mm size stainless steel bright finish handle, fancy type for cupboard shutter all as specified and directed by Engineer-in-Charge.

S&F 100 mm size hasp and staple,safety type,Stainless steel bright finish ,including bolt to hinge plate and fixed with screws,complete all as directed.

M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer - in - Charge.

M&L applying two coat of synthetic enamel paint on old decorated wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

S & F in repair powder coated aluminum sliding window three track with frame & two glass shutter using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminum powder coated section aluminum cleat , PVC track, bearing, handle lock rubber beading etc complete fittings as approved. Note :- Size of aluminum section shall be under – (i) three track top and vertical – jindal main 2010. Section No 20621 or equivalent as approved by GE. (ii) Three track bottom – Jindal main – 2010 section 20620 or equivalent as approved by GE. (iii) Shutter Vertical Section - Jindal main – 2010 section 20604 or equivalent as approved by GE. (iv) Shutter top and bottom - Jindal main – 2010 section 20604 or equivalent as approved by GE. (v) Shutter vertical middle ( interlock) - Jindal main – 2010 section 20605 or equivalent as approved by GE.

S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified

S&F powder coated aluminum windows and ventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified.

S&F aluminum anodized grill diamond shape 100mm x 100mm aperture of 6 mm dia round bars including necessary joining cleats, clips anodised complete all as specified.

M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs all as specified.

Shortcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix(minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound/weak concrete material 25mm average thickness from slabs, beams, columns etc with manual chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@6 sqm/ltr at DFT of 100 microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge. Note : After completion of shorcreting the splash of cement on wall to be cleaned completely.

S & F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and typing with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement all as specified & directed by Engineering-in-Charge.

Dismantling of Brick tiles or terracing tiles, single layer on roofs including cement mortar.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)

M & L rendering 15mm thick water proofing plaster in CM 1:3 on slab / roof admixed including and with Dr. Fixit pidilite LW+@ 200 ml per bag of cement.

M & L cement concrete flooring type B0 1:2:4 using 12.5 mm graded aggregate on roof slab all as specified and directed by Engineer-in-Charge.

Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr /10 sqm with a thickness of 650micron Note: 6 Hrs interval between two coats will be maintain& the work will be carried out through company applcator duly got approved from Accepting officer in writing before incorporation and paid only after receiving of the warrenty certificate from the company. Make : Asian paint or equivalent as approved by GE Note : The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer instructions.

M & L Endura Cool roof tiles 300 x 300 x 10 mm white vitrified water absorption < 0.5% SRI >90 (ASTME 1980, EN673 and En 411) BEPL (Building energy perfoance laboratory ) certified laid over screed bed or bedding layer of mortar 15 mm thick CM (1:4) all as Specified.

M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed.

M&L machine cut kota stone slab flooring 18-20mm thick in single piece over cement screed base laid and jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge.

M&L for kota stone slab flooring 18-20mm thick in single piece in riser of steps,skirting,dado and pillar laid and jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge.

M&L 18- 20mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite.

Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge..

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.

M & L 10mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.

M&L weather proof exterior emulsion two coats over a coat of exterior primer including preparation of Newly plastered surfaces and applying exterior grade wall putty (Asian / JK / Birla) over plastered surfaces making it smooth with sand paper by mechanical method i.e. with hand electric grinder complete all as specified and as directed by Engineer-in-Charge.

M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.

M&L weather proof exterior emulsion two coats over a coat of exterior primer including preparation of surfaces by removal of existing treatment and applying exterior grade wall putty (Asian / JK / Birla) over plastered or unplastered or concrete surfaces making it smooth with sand paper by mechanical method i.e. with hand electric grinder complete all as specified and as directed by Engineer-in-Charge.

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises.

M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.

M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.

S&F in repairs stainless steel sink overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as directed.

S & F in repairs stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge.

S & F drapery curtain rod, mild steel, powder coated 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .

Dismantling water tanks and removing to store of 500 ltr capacity

S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified.Make -

M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.

M&L in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.

S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed.

M &L for water proofing treatment to RCC sunken slab (nexc 45 cm depth of sunken) as specified below dir by EIC. (a) applying 15 mm thick plater in cm 1:3, with WPC (b) creating fillet coving of 50x50 mm with polymer modified mortar (c) apply first coat of two component modifeid polymer coating on hor and vert surface (d) prvn of glass fibre mess 2x2 mm immediately on above coating (e)apply second coat of two component modifeid polymer coating after 72 hrs .( plastered , PCC paid sep.) . plan area shall be measured

M & L PCC (1:5:10) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in shunken floor complete all as specified.

Dismantling of CI pips or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.

Dismantling of CI pips or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.

Refixing Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in walls or in floors

Refixing Cast iron soil 75 mm bore ,waste and vent pipes,in any length with or without ears with cement joints,laid in trenches or in floors.

S & F in repairs sand cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified.

S & F in repairs sand cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified

S&F 100mm cast iron sanitary connection socket to fit WC out-let, all as specified.

S&F in repairs 75mm bore Cast iron cowls, all as directed.

M&L 75/100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S & F in repairs CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured).

S & F in repairs CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured) with access door.

S & F in repairs CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with access door.

S & F in repairs CI branch pieces single 100mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, complete all as specified.

S & F in repairs CI branch pieces single 75mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, complete all as specified.

Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge .

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.

S & F 100mm bore stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed by Engineer - in - Charge .

Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store

Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store

Refixing 15 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc.)

Refixing 20 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc.)

Supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.

Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.

Supply & fixing mild steel tubes of size 40 mm bore (medium grade) galvanised with all fittings and fixed complete to wall or floors all as specified.

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia including Jet spray and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified .

S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .

S & F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .

S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed by Engineer-in-Charge. Make-ESSESS Cat Part No DE- 12 or equivalent to hindware.

S & F in repairs brass chromium plated wall mixer with non telephonic shower arrangement for mixing hot and cold water screwed down for iron pipe and fixed as directed by Engr-in-charge : Make : ESS ESS Cat Part No .: TM-115 or equivalent.

S & F in repairs for brass chromium plated shower rose 150 x 150 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.

S & F brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .

S&F in repairs soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.

S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement.

S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge.

M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias, louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete ( un re-inforced) of any description in roofs, floors(other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .

M&L for chequered cement concrete designer preposlshed glossy finished tiles 25cm x 25cmx25mm thick with grey cement and pigments, heavy duty, set jointed and pointed in neat cement slurryand pigments as in floors over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed by Engineer-In-Charge

S & F 125 mm long aluminium anodised barrel tower bolt of extended section and fixed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixe.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,150 mm fixed in floor all as specified and directed.

S & F in repair MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M & L for preparation of old painted wooden surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint all as specified.

S & F chicken wire mesh of size 12.5 mm x 0.51 mm (24 SWG) hexagonal construction, stretched firmly over the insulation and fixed.

Supply only liqid water proofing compound.

M&L marble work 18 to 20 mm thick in single piece in riser of steps, skirting , dado, and pillar laid and jointed in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade as approved complete all as specified and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs , floor slabs , landing and similar work exceeding 200mm thick all as specified

M&L for RCC (nominal mix) 1:2:4 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landing , balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Dismantling water tanks and removing to store of 1000 ltr capacity

S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified.

S & F Vitreous china white, flat back, wash basin of size 550 x 400 mm including brackets, waste pipe and waste fitting 40 mm brass chromium plated and waste pipe and 15 mm dia PVC connection with brass nuts as in repairs complete all as specified and as directed.

Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store

Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.

S&F in repair stop cock/gate valve cast copper alloy screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 20mm.

S&F in repair stop cock/gate valve cast copper alloy screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 25mm.

M & L for roof trusses (Framed) Trussed, purlines, crane gantries, rail and fasternings and heavy bracket framing ( Beam, tee, angle, chanle or flat sec) including distance piece., cleats etc Fe - 410 W (Gde-E-250) A quaility all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm redius complete all specified and directed.

S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.

S&F PVC waste pipe 32mm dia & 90 cm long Complete all as specified and directed.

S & F Waste coupling for 40 mm bore dia. of discharge pipe PTMT (half or full threaded) . Minimum weight 45 gms.

M&L 50mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement.

Preparation of newly plastered surface of wall and applying two coats of cement base paint. Complete all as specified and directed.

Complete removal of old existing treatment on walls and applying two coat of cement base paint including preparation of surface complete all as specified and directed by Engineer-in-Charge.

M & L for preparationof new steel surface over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L 75mm thick PCC 1:4:8 , type D- 2, using 40mm graded aggregate as in sub base all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block with grey cement & no pigment, any shape and size confirming to IS 15658-2006 of 60mm thick M-40 grade including and over 25mm thick sand cushion.

SCHEDULE 'A' SECTION-II (E&M PORTION)

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.

Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd

M&L Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core including PVC rigid concealed conduit medium grade of suitable size (not less than 20mm dia) with all accessories such as bend reducers /MS hooks, MS junction boxes 2mm thick galvanized steel pressed sunken terminal boxes of suitable sizes for mounting of switches sockets, fan regulators etc covered with 2.8mm thick plastic laminate (Hylem/Anchor) top cover including continuous earth wire of size 1.5 Sqmm PVC strandedcopper conductor unsheathed, insulated stranded (Green colour) connected to common earth point dolly complete all as spd & directed .

All as per Srl item No. 153 here-in-before but one three pin Piano type socket outlet 5 Amps on the independent board complete all as specified.

All as per Srl item No. 153 here-in-before but one three pin piano type socket outlet 5 Amps on the board complete all as specified.

M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.

S&F switch piano type single pole one way 6 Amp,230 VAC supply. .Make:Anchor/Havells/Legrand

S&F piano type socket two in one ,3 Pin 5 Amps 230 VAC supply, .Make:Anchor/Havells/Legrand

S&F switch piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) .Make:Anchor/Havells/Legrand

S&F piano type socket Pinao type 6 Pin 16 amp,230 VAC .Make:Anchor/Havells/Legrand

S&F Electric bell ding dong complete all as spd .Make: Cona/Anchor/Havells

S&F bell push flush type 5 Amp, complete all as spd .Make: Cona/Anchor/Havells

Supply & fixing PVC Lamp holder suitable for LED Electric Bulb with backalite 20mm back plate complete all as specified & directed, .Make:Anchor/Havells/Legrand

S&F LED Lamp 9 Watt retrofit and connecting complete all as spd and directed.Make: Bajaj/Crompton/Havells

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.Make:Anchor/Havells/Legrand

S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring).

S & F of MCB suitable for 240 volts AC supply, SPNwith over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps all as specified and directed.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..

S & F of isolator suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps all as specified and directed.

M&L sub main wiring of PVC FRLS insulated unsheathed two core 6 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6.0 sqmm as earth wire drawing in concealed PVC conduit complete all as specified and directed.

M & L for LED 10W bulkhead fitting with IP-65 engineering plastic housing with clear, single phase 240C, including 1.0 sqmm copper flexible cable twiested three core alongwith flexible PVC conduilt from ceiling rose to fitting testing complete Cat part No. BLRB 18W CW of make Bajaj or equivalent model of make Havells/ Crompton Greaves/ Philips / Wipro as approved by GE. Note : Warranty and test certificate of LED light fittings to be produced before incoporating.

S&F of Heavy Duty exhaust fan of 400-450mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified and directed by Engg-in- Charge.

S&F of air freshner pvc exhaust fan of 250-300mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified and directed by Engg-in- Charge.

S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin Make- CG/Bajaj/Havells

M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduit ISI marked and conduit fittings for one light point/fan point/exhaust fan controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).

All as per Srl item No.175 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.

All as per Srl item No. 175 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.

All as per Srl item No.175 here in before but with 1.5 Sqmm (nominal area) PVC insulated multistranded copper conductor cable unsheathed ISI marked controlled by two way switches complete all as specified.

M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked in Existing PVC concealed conduit ISI marked and conduit fittings for one light point/fan point/exhaust fan controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).

All as per Srl item No. 179 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.

All as per Srl item No. 179 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.

All as per Srl item No.179 here in before but with 1.5 Sqmm (nominal area) PVC insulated multistranded copper conductor cable unsheathed ISI marked controlled by two way switches complete all as specified.

S&F modular switch 1 way 6 amp 1 module all as directed by Engr in charge.

S&F modular switch 2 way 6 amp 1 module all as directed by Engr in charge.

S&F socket 6 amp 2/3 pin combind two module complete all as specified and directed.

S&F modular switch 1 way 16 amp 1 module all as directed by Engr in charge.

S&F socket 6/16 amp 2/3 pin combind two module complete all as specified and directed.

S&F modular White cover plate with frame, 1 module complete all as specified and directed.

S&F modular White cover plate with frame, 2 module complete all as specified and directed.

S&F modular White cover plate with frame, 3 module complete all as specified and directed.

S&F modular White cover plate with frame, 4 module complete all as specified and directed.

S&F modular White cover plate with frame, 6 module complete all as specified and directed.

S&F modular flush metal box 1/2/3 module complete all as specified and directed.

S&F modular flush metal box 5/6 module complete all as specified and directed.

S&F modular Buzzer, ding dong AC 230 Volt single pole complete all as spd

S&F modular bell AC 230 Volt single pole, complete all as spd

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .

S&F modular Fan step regulator, 120 watt ,W - 2 module complete all as specified and directed.

M&L for LED 10W bulkhead fitting with IP-43 engineering plastic housing with clear ,single phase 240V, including 1.0sqmm copper flexible cable twiested three core alongwith flelxible PVC condiut from ceiling rose to fitting testing complete all as specified and directed .

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.

S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..

Blanking plae of plastic (Suitable for distribution board)

S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.

M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified. (Note:- Three lengths of 6 sqmm cable and will be measured as one length).

SUDESH ENTREPRISES