WBPWD/EE-II/KNHD/NIT-37e/25-26

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). Extra for staging beyond 4 m in any floor :

Cutting holes and subsequent mending good damages.Diameter exceeding 150 mm. but not exceeding 300 mm. In brick work [Cement-6.0 Kg/Mtr] :

Brick work with 1st class bricks in cement mortar (1:6). (b) Super Structure 1st floor :

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety - Ground floor :

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] With 1:6 cement mortar -- 20 mm thick plaster -- Ground floor :

With 1:6 cement mortar -- 20 mm thick plaster -- First floor :

With 1:6 cement mortar -- 20 mm thick plaster -- Second Floor :

Dismantling H.C.I. pipe with fittings including melting lead caulked joints. 150 mm :

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length - 160 mm :

Fittings - Door Tee - 160 mm :

Door Tee - 160 mm :

Door Bend (T.S) - 160 mm :

Door Bend (T.S) - 110 mm :

Pipe Clip - 160 mm :

Vent Cowl - 160 mm :

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. Above ground - 110 mm dia :

Above ground -160 mm dia :

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. Pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. Nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size :

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap (with vent) :

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. Anglo Indian - Plastic (hallow type) white :

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. W.C. :

Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting & fixing Centrifugally Cast (spun) iron soil,waste water and rain water (Hubless) pipe epoxy coated inside & outside conforming to I.S. 15905 / 2011 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately)150 mm dia. (internal) 150 mm dia. (internal) :

100 mm dia. (internal) :

Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including joining and painting two coats to theexposed surface with approved paint complete. (Payment of Painting will however be paid seperately). With valamoid joints including sealing the top with cement mortar (4:1) 150 mm dia. :

100 mm dia. :

Supplying, fitting & fixing H.C.I, bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). With valamoid joints including sealing the top with cement mortar (4:1) 100 mm dia. :

Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surfacewith approved paint complete. (Payment of Painting will however be paid(seperately). With valamoid joints including sealing the top with cement mortar (4:1) 100 mm dia. :

Supplying,fitting and fixing cast iron 'P' or'S' trap conforming to I.S. 3989/ 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid separately). 'P' Trap -100 mm dia :

Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/1970 and 1729/1964 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). 100 mm X 600 mm :

Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including etc. Above ground - 110 mm dia :

Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipesconforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 withRing Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. 250mm internal dia. :

Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S- 12592(M.D) 15 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size each 2536.00 Cover: 460 mm X 75 mm Frame: 620 mm X 150 mm opening: 360mm Weight: 100 kg (approx)