Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-Finance | L1 | Accepted-Finance BEING LOWEST | |
| 2 | L2₹33.0 L+₹6.0 L (22.2%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹34.6 L+₹7.7 L (28.4%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹35.4 L+₹8.5 L (31.3%)Rejected-Finance AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹35.9 L+₹8.9 L (33.2%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹45.3 L
EMD Value
₹91,000
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D GIRINAGAR PUNE 411025
GE I R AND D GIRINAGAR PUNE 411025
ADDN ALTN OF FIRING RANGE BLDG NO 304 AT VRDE AHMEDNAGAR
2023_MES_602825_1
GE I R AND D GIRINAGAR TOKEN 11 OF 2023 2024
Open Tender
Civil Works
Works
180 days
GE I R AND D GIRINAGAR PUNE 411025
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE I R AND D GIRINAGAR PUNE 411025
₹91,000
Yes
7 Aug 2023
12 Jun 2023
3 Jul 2023
12 Jun 2023
1 Jul 2023
19 Jun 2023
12 Jun 2023 - 15 Jun 2023
Amount
(B&R WORKS) Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for Glazed ceremic tiles in vertical surface 300mmx450mmx7mm/8MM thick set and jointed in neat cement slurry and pointed in white or colour cement to match with & including rendering 10mm thick in cement mortar 1:4 as backing coat on fair faces of brick work or concrete surfaces complete all as specified and as directed.
Demolition of cement concrete (unreinforced) as in floor and paving n.exc. 15 cm thickness (below or above ground level) including disposal off rubbish to a distance not exc.100 Mtrs complete all as specified and as directed.
M&L for 75 mm thick cement concreate 1:4 :8 Type D-2 (using 40mm graded stone aggregate) complete all as specified and as directed.
M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed.
M&L for non skid coloured ceramic tiles size 600mmx600mmx7 to 8mm thick (square/rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Taking down cement plaster on brick/stone or concrete surface including racking out joints hacking for key, scrubbing down with water to receive plaster including removing debris/rubbish materials off the site complete all as specified and directed.
M&L for rendering10mm thick in CM 1:6 with a mixture of water proofing compound @ 3% by weight of cement finished even & smooth with out using extra cement on fair faces of brick or concrete surfaces complete all as specified and directed.
M&L rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement on brick/concrete surfaces all as specified and as directed. Note :- Water proofing compound shall be measured and paid seperately as supply only.
Supply only Water Proofing compound of approved make all as specified and as directed.
M&L for applying two coats of acrylic emulsion exterior paint of approved shade over and including priming coat of exterior primer including preparation of new surfaces complete all as specified and directed.
M&L applying one coat of oil bound distemper white or tined on old wall surface including preparation of surface complete all as specified and directed.
M&L for preparation of old painted wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of any tint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of any tint complete all as specified and directed.
M&L for prepartion of old decorated surfaces of walls by brooming down and scraping whereever necessary and applying one coat of white wash all as specified and directed.
M&L applying two coats of oil bound distemper over one coat of chalk whiting primer coating on newly plastered surfaces including preparation of surfaces of wall all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame) and removing to or from store(steel windows and ventilators) all as specified and directed.
Taking down wooden chowkats or frame including shutter (without taking off shutters from the frame) exc. 1.5 Sqm and n.exc. 4.00 Sqm all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) shutters of doors, windows, & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z Sections and other sections of approved make confirming to IS: 733 and IS: 1285, fixing with dash fasterneres of required dia and size including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P brass /stainless steel screws compleate all as specified and directed.
M & L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregates) as in hold fasts/bed blocks, filling in frame of Doors complete all as specified and directed.
S & F bands, straps, supports or stay including bolts if required hooks and pintle hinges , large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties and similar articles confirming to Fe-290 Gde-E-165 complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins and spring clips and providing and fixing new ones complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality n.exc 0.5Sqm in each panes and glazing with oil putty complete all as specified and directed.
S&F for sheet figured glass pin headed type glazing with oil putty 3mm thick glass n.exc 0.5 Sqm in each panes complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F Door closer hydraulically regulated, designation No 02 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed with cast iron body complete all as specified and directed.
S&F Floor door stopper of aluminium alloy, body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed.
S&F pressed steel framed doors size of frame 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
M&L for 35mm thick factory made IInd class hard wood (Hollock) glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc for window/ventilator edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, complete all as specified in SSR Part I section 8, clause 8.24 (a) complete all as specified and directed.
S & F Stainless Steel butt hinges heavy duty 100 mm long with soft touch finish complete all as specified and directed.
S & F Stainless Steel tower bolt of heavy duty 150 mm long with soft touch finish complete all as specified and directed.
S & F Stainless Steel handles 100 mm size of heavy duty with soft touch finish complete all as specified and directed.
S & F aluminium alloy, anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of 300 mm long complete all as specified and directed.
Dismantling of water tank exc 500 & n exc 1000 Lit capacity and removing to store complete all as specified and directed.
S&F rotational moulded polythene water storage tank 500 Ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. .
S&F 15 mm dia ball valve of brass with high pressure with polythene float and fly nut complete screw and iron pipe or brass ferrule and fix complete all as specified and directed.
Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
S&F G.I. tubing medium grade 15 mm dia fixed to wall or ceiling or laid in floors with & including all fittings complete all as specified and directed.
All as per item No 39.00 but except tubing complete all as specified and directed.
S&F G.I. tubing medium grade 20 mm dia fixed to wall or ceiling or laid in floors with & including all fittings complete all as specified and directed.
All as per item No 41.00 but except tubing complete all as specified and directed.
S&F in repairs PVC Stop valve 20mm dia of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms) complete all as specified and directed.
S&F in repairs 15mm cast copper alloy bib taps with crutch fancy CP, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs 15mm stop valves cast copper alloy screwed down high pressure with crutch or better fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs vitreous China wash basin, counter with bowl type granite platform angle back, size 580 x 450 white in repairs, and pillar tap 15 mm dia fancy type - 02 No, CP waste fittings 32 mm dia - 02 No, PVC connection 15 mm dia 450 mm long - 02 No, waste pipe 32 mm dia - 02 No including brackets complete all as specified and directed.
S&F in repairs 10 Ltrs capacity, PVC valve less, symphonic action type low level flushing cistern white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs vitreous china urinal, full type, white including urinal spreader PTMT fixed with 15 mm dia pipe - 01 No, PTMT waste coupling suitable for urinals 32 mm dia - 01 No, waste pipe 32 mm dia - 01 No complete all as specified and directed.
S&F in repair vitreous china squatting pan,Orrisa pattern, size 580mmX440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
Removal of entire existing water proofing treatment in any position including tar felt, lean concrete any thickness, gravels etc & removing to a distance exceeding 500 mtr but not exceeding 2.00 Kms complete all as specified and directed.
M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in padding concrete complete all as specified and directed.
M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including weathering slightly rounded and chamfered angles and throating including necessary formwork complete all as specified and directed.
Roughening surfaces of old roof concrete on roof and parapet wall by picking, scraping sweeping cleaning and washing down with water and cleaning of all foreign matters and dust etc complete all as specified and directed.
M & L for 10 mm thick cement plaster in CM (1:3) with a mixture of water proofing compound @ 3% by weight of cement on dried concrete surface finished fair and even without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid seperately as supply only under relevant item of this BOQ.
M&L for Cleaning and Removing loose concrete and filling cracks with smartcare repair mortar including Supplying and applying High performance Hybrid Polyurea waterproofing coating spray/brush applied, Smartcare Ultron with and elogation of 500 (+/-50)% and tesile strength of 11 to 13 N/mm2 as per ASTM D 2370, Crack bridging ability of upto 3.5mm as per ASNZ 4548, shore A hardness of min. 60 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying Smartcare Ultron in two coats @ Min 1.5Kg/Sqm complete all as per Manufacturere specifications complete all as specified and directed.
S & F 75 mm dia PVC Nahani trap with grating including joint to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Stainless steel railing made out of grade 304 stainless steel pipe with and including fixing acceceries like cleats, hooks, & fittings all as specified and directed by Engineer-in-Charge. NOTE :- Cost of Spot/running welding as per site requirement shall deemed to be included in unit rate quoted for stainless steel work. Actual weight arrived shall be measured & paid
(PATH/HARDSTANDING) Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
M&Lfor hard core of brokenstone or boulders of gauge not exceeding 63mm of gauge deposited, spread levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete complete all as specified and directed.
M&L for Providing precast cement concrete 1:1 ½:3 type A-1 (using 20mm graded crushed stone aggregate) in steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, boundary pillars, bed plates, pintle blocks, anchorage blocks, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in base/subase, foundation and mass concrete complete as specified and as directed
M&L for 50mm thick, sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for machin pressed precast concrete with coloured rubber moulded cement and pigment interlocking paver block of 60mm thickness M-35 grade any shape and size conforming to IS 15658-2006 complete all as specified and directed.
M/L for brick work with sub class 'B'' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M/L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for prelaminated particle board, 18/19MM Thickness,interior grade, prelaminated one side with decorative choice lamination & other side balancing white pelmet box fixed including SS Curtain rods 25MM dia with brackets & screws to timber work complete all as specified and directed.
(E&M WORKS) Taking down carefully aluminium point wiring (light, Fan, socket or power) complete including fixture & fitting such as switches, sockets or power socket, pendents, regulators, light fittings etc complete and making good disturbed surfaces of walls, ceilings and floors etc complete all as specified and directed.
Taking down unserviceable DBs/switch fuse units any type including MCB's/isolators complete all as specified and directed.
Taking down unserviceable security light fitting any type complete all as specified and directed.
Taking down old aluminium unserviceable sub main wiring any type complete all as specified and as directed.
Material and labour for point wiring with single core PVC insulated and unsheathed 1100 volts garade FRLS electric cable with multistranded copper conductor of size 1.5 sqmm (nominal area) drawn through in and including concealed PVC conduit of 20mm dia including cutting chases on wall with all necessary accessories including wall clamp, tees, junction boxes & provision of pressed steel terminal box powder coated of suitable size with 3mm thick plastic laminated sheet cover for mounting switches, sockets & regulators & drawing continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5sqmm (nominal area) complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rate include cost of making MS box in concealed for cutting and sinking and making good to wall. (ii) On soffit of ceiling, no chases will be cut. The wiring will be done in casing caping. (a) For one light/bell point controlled by one single pole switch.
(b) For one ceiling fan / exhaust fan/wall and wall mounted fan point controlled by one single pole switch.
(c) For one 3 pin, 5 Amp socket oultet on independent board.
(d) For one 3 pin, 5 Amp socket oultet on same board with other switches.
All as per serial item No 75.00 here-in-before, but for 3 pin socket outlet 15 Amp on independent board with other circuit with the cable of 2.5 sqmm size and earth continuity conductior of 2.5 sqmm size PVC insulated copper stranded conductor cable complete all as specified and directed.
All as per serial item No 75.00 here-in-before, but for single pole and neutral with a two pin and earth plug and socket outlet on independent board with other circuit with the cable of 4 sqmm size and earth continuity conductior of 4 sqmm size PVC insulated copper stranded conductor cable (Sheet metal enclosure with plug & socket shall be paid separately) complete all as specified and directed.
Supply and fixing sheet metal enclosure (for AC's / equipment ) single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 volts complete all as specified and directed by Engineer-in-Charge.
Supply and fixing socket outlet 3 pin 5/15 Amps flush type multipurpose complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing socket outlet 5pin 5 Amps flush type complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano, flush button 15 Amps single pole, one way complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch piano, flush button 5 Amps single pole, one way complete all as specified and directed by Engineer-in-Charge.
Supply and fixing ceiling rose, surface, backlite 3 terminals 65mm x 50mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing stepped type electronic fan regulator complete all as specified and directed by Engineer-in-Charge.
Material and labour for sub main wiring with two single core PVC insualted unsheathed stranded copper conductor cable 2.5 sqmm size drawn through in and including concealed PVC conduit medium grade with all accessories including continuous earth wire PVC insualted unsheathed cable 2.5 sqmm copper stranded conductor and connection to common earth and earth dolly including conneciting to main board complete and cutting chases of suitable girth on brick/concrete surface & making good disturbed surface as per existing surface complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs LED lights fitting 1x 18W, 220VAC decorative box type with driver, LED tube light connecting up with three core flexible copper conductor cable of suitable size ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing in repairs LED 10 watt mirror light fitting wall mounted with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core copper conductor cable of suitable size complete all as specified and directed.
Supply and fix LED security light 25 to 35 W IP 66 pressure die cast aluminium housing for building complete including suitable GI bracket, MS clamps, nuts & botls with necessary electrical connection complete all as specified and directed.
Supply and fixing sheet steel enclosure MCB DBs factory fabricated phosphatised powder painted, Single pole & neutral, with 200 Amp rated bus-bar, 240 volt, AC, 4 ways, double door type complete all as specified and directed by Engineer-in-Charge.
All as per serial item No 89.00 above but SPN 8 way double door complete all as specified and directed.
Supply and fixing MCB, Single pole and neutral, 40 Amps, 240 volts complete all as specified and directed by Engineer-in-Charge.
Supply and fixing MCB, Single pole 6 Amps to 32 Amps 240 volts complete all as specified and directed by Engineer-in-Charge.
Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level and connected to earth plate surrounded by 15cm thick packed layers of charcoal dust and common salt and conected to GI wire 4mm dia by means of bolts, nuts check nuts and wahsers of galvaised iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvaised iron or steel pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and Rcc cover all as shown in Electrical Plate No 3 & testing including dismantling of existing old u/s earthing complete all as specified and directed.
DESIRES ENGINEERS &CONTRACTORS
Siddhant Hukumchand kumath
Smruti Construction
M/s. Shahabad Enterprises
Abhiraj Enterprises
M/s. N D Karande
M/s S. R. Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .