PERIODICAL SERVICES AND REHABILITATION OF DISTRESSED CONCRETE MEMBERS AND REPAIR / REPLACEMENT TO ROOF TREATMENT AT INS HAMLA

Amount

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of colour wash complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat oil bound distemper with roller complete all as specified and directed.

M & L for complete removal of existing treatment by scrapping / washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with roller complete all as specified and directed.

M & L white cement based Wall care putty not less than 1mm thick on wall/ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description not other wise described over 10 cm width or girth and applying one coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces of walls/slab projections by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including washing down,with water and applying one coat of 100% antifungal acrylic emulsion paint in approved shade etc all as per manufacturers instructions including necessary scaffoldings etc,complete all as specified and as directed.

M & L for cutting out cracks (not exc 5mm) to V-section in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.

M & L for complete removal of existing treatment on surfaces of walls, chajjas etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots washing down with water and freeing the surfaces from all loose dirt, chalk, grease, fungus. Flakes etc applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffoldings complete all as specified and as directed.

Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed

Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.

M/L for rendering 5 mm thick in CM 1:3 as in ceiling finishing even and smooth (with out using extra cement) etc complete all as specified and directed.

Rendering 20mm thick in (1:4) cm (in two coats (15+5mm) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement complete all as specified and directed. ( Note : WPC will be measured separately).

M&L for for preparation of new plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer and including necessary scaffolding complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed

M/L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.

M/L for french polishing on surfaces of any description width or girth and including cleaning and preparing the surfaces including a coat of wooden filler on old wooden surfaces one or more coat etc complete all as specified and directed.

Writing letter or figures (block, Roman, Italic, or Indian ) n.ex 20 cm hight complete all as specified and directed.

M&L stops, commas, short lines, dashes, hyphens, brackets,etc.

M&L for Removal of plant growth by injection with chemical glyphospate solution ( 4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) dulited with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint all as directed by EIC.

Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified Note : Demolition should be done by chiselling.

M&L brushing neat cement slurry @ 3 Kgs of cement per Sqm

M&L for PCC 1: 2: 4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course/ padding concrete including rounded or chamferred on edges etc., with liquid water proofing compound as per manufacturers instructions all as specified and directed. (Note :- Supply only liquid water proofing compound and polyster triangular fibres shall be measured & paid separately).

M/L for rendering 15 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on roof finished even and smooth using liquid water proofing compound as per manufacturers instructions Complete all as specified and directed. (Note :- Supply only liquid water proofing compound shall be measured & paid separately).

Supply only polymer based liquid water proofing compound complete all as specified and directed.

M&L for providing 4 mm thick APP modified memberane over (Accessible) RCC roof with the following specifications :- (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm . (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm Note :- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide 20-25 mm thick machine pressed cement concrete tiles 300mm x300mm over & incl cement screed bed 15mm thick in CM 1:4 set and jointed, pointed in neat cement slurry with grey cement complete all as specified and directed".

M&L for providing 4 mm thick APP modified memberane in repairs over (Inaccessible) RCC roof with the following specifiations :- (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm . (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings etc complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for steel and iron work etc complete all as specified and directed.

Supply & fix roof trusses (framed), trussed purlin, crane gantries and fastenings and heavy brackets framing (Beam, Tee, angle, channel or flat sections) including distance pieces cleats etc confirming to grade Fe-410-W (Gde-E-250) etc complete all as specified and as directed.

S &F galvalume aluminium zinc coating corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa having coating of 150 micron as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed by Engr-In-Charge.

S &F galvalume aluminium zinc coating plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge gable fixed with self tapping screws as specified and directed by Engr-In-Charge.

S & F Mild Steel Flat Iron 40X6mm as in Wind Ties for Roof, including all necessary drilling, bolting or riveting, for securing etc, complete all as specified and directed.

Preparation of new or previously untreated new surfaces of steel and application of two coats of synthetic enamel paints over one coat of red oxide, Zinc chrome, complete as specified and directed.

S&F Steel rolling shutters 1.5mm thick lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle.

M&L Safety lever locks mild steel with 4 levers for rolling shutters

M&L Ball bearing for rolling shutters complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but n exc 4 sqm completed as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq. M each

Taking down shutter of any description exc 1.00 but n exc 2.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 2.00 sqm each complete all as specified and directed.

Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.

Taking down door shutter of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.

Taking down door shutter of any description n exc 1.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws as required etc complete all as specified and directed.

M&L, 18 to 20 mm thick M/C and M/C polished Kota stone slab in single piece in jambs and in double piece in cills on vertical surfaces and over 15mm thick cement mortar 1:3 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing and necessary edge moulding before fixing of kota stone complete.

S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick and fixed in repairs complete all as specified and directed.

Supply only sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply only aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

S&F MS flot iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0.

S&F 35mm thick IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) fixed to chowkats etc complete all as specified and directed.

S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats.

M&L Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

Supply & Fixing aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

Supply & Fixing in repairs aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specirfied and directed.

S&F stainless steel butt hinges 100mm size complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specified and directed.

S/F 150mm length extruded aluminium alloy handles,fabricated type, anodised.

S&F 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

S&F 300mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

S&F aluminium alloy, anodised, sliding door of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed. complete all as specirfied and directed.

M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.

M&L preparing surfaces of wood or wood based materials, any description ends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed..

Preparing surfaces of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area n exsc 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed.

M&L for preparation of new wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete

M&L Brick work with sub class 'B' old size bricks, built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position and removal of debris outside MD land complete all as specified and directed.

M&L for providing stages wise waterproofing treatment to sunken portion surface area of toilets as under. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions. Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fyber glass cloth over the 1st coat while the coated surface is still tacky Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions.

M&L for cement concrete Type E2 1:5:10 using 40 mm graded aggregate or brick bats as in lean concrete.

S&F in repairs vitreous China squatting pan, 'orrisa' pattern WC of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding complete all as specified and directed.

S&F vitreous China squatting pan, 'orrisa' pattern WC of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap) complete all as specified.

S&F in repairs Vitreous China wash down water closet Pan (Padestal Pattern) white with seat cover and fixing complete all as specified and directed.

M&L WC connector 110 mm PVC SWR for WC complete all as specified and directed.

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

M&L connector PVC 450mm long complete all as specified and directed.

Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises.

M&L PCC 20mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed..

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L glazed ceramic jointless coloured tiles in vertical surface 450x350x7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

Machine cut Kot stone slab flooring 20-25mm thick over and including provision of screed bed 20mm thick in CM 1 : 6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.

S&F in repairs PVC cabinet mirror of size 600X450 mm complete all as specfied and directed. Make: polytuf or Prayag polymers pvt ltd.

M&L for 4mm thick coloured FRP chajja of approved pattern/shape/size (with drop) make and colour of mangalore clay tile design (the FRP chajjs to be moulde in gel coat finish, the thickness to be 4mm and back patti to be additionally reinforced with core matt, all resins and pigments to be used with GSM for extra thickness neassary FRP covered metal) fixing the chajjas in position with 8mm dia and 125mm long split fastner bolts (shakti or equivalent) spaced at not more than 45 cm C/C and filling the gaps with poly sulphide sealent. including neassary scaffolding/erection of working platform and fixed in repairs etc complete all as specfied and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

M&L for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L plain cement concrete type B2, 1 : 2 : 4, 100mm thick (using 40mm graded aggregate) finished even and fair without using extra cement complete all as specified and directed.

M&L bitumastic filling the joint of 10mm wide and 75 mm depth comprising of one part of heated bitumen blown grade (85/25) any penetration and 2 part of sand by weight all as specified and directed.

M&L bitumastic filling the joint of 10mm wide and 100 mm depth comprising of one part of heated bitumen blown grade (85/25) any penetration and 2 part of sand by weight all as specified and directed.

Demolition of Reincorced concrete in chajjas and similar suspended, slab facia drop etc work complete all as specified and directed.

M&L RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in chajjas complete all as specified and directed .

M&L RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in fascias, louvres, parapets and the like complete all as specified and directed .

S&F TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L form work for soffit and sides of chajjas, troughs and similar items including edges rough finished surface of concrete flat complete all as specified and directed.

M&L form work to fins, louvers, fascia rough finished surface of concrete flat complete all as specified and directed.

Tubular towel rail / curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed.

S&F in repairs Aluminium brackets for tubular towel rail 20mm dia complete all as specified and directed.

M&L tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repairs complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

Ditto all as per item above but 20mm bore of pipe complete all as specified and directed..

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.

Ditto all as per item above but 20mm bore dia complete all as specified and directed.

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 20 mm in repairs complete all as specified and directed.

M&L Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed.

M&L Hat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed in repairs complete all as specified and directed.

M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

Supply only pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. .

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

Ditto all as per item above but angle cock Chromium plated 15mm bore dia complete all as specified and directed.

S&F health faucet (Hand wash for EWC) first quality including CP bracket to hold the faucet with pipe in wall all as per manufacture instructions and as directed. Make Parryware or equivalent.

M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed..

M&L stainless steel soap dish of max size 160mm x90mm and fixed in repairs.complete all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

M&L Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

M&L Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 100 mm dia of outlet complete all as specified and directed.

Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified.

M&L Non asbestos fibre cement building boards 4mm thick fixed / inserted to GI frame work complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed..

M&L Hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified.

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force 2)

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressedRCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem (Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement only shall be measured and paid separately).

M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers each of equal thickness including levelling, profilling etc complete all as specified and directed.

M&L for providing Polymer Bonding Agent of Make M/s. Krishna Conchem (MONOBOND) OR Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members , finished with spatula etc. complete all as specified and directed.

M&L for anchoring & welding reinforcement bar in existing RCC member by providing holes of minimum 10d depth for bars upto 16 mm dia and grouting in position with locfix (fosroc), including drilling of holes, cleaning etc. complete all as specified and directed, Note:-reinforcement will be measured and paid for separately.

Vishal Builders

M/s. Deepak Traders

Maruti Construction Co.

M/s. JAY JYOTIRLING CONSTRUCTION CO

PANKAJ AND BROTHERS

R K TYAGIS