Repairs to compound wall, barbed wire fencing etc at Mil Station Bhusawal under GE (South) Ahmednagar

Amount

Demolition of Brick work/stone boulder masonary built in cement motor including all quoins, arches, pillars, etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embeded in cocnrete, brick work masonary portion and making good disturbed ground complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Brick work with sub class B bricks straight or curved on plan using old bricks built in CM (1:6) complete all as specified and directed

15 mm thick rendering in CM 1:4 on other than fair faces of brick surface/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Cement concrete 1:4:8, tpe D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete all as specified and directed.

Reinforced cement concrete M-25 design mix (using 20 mm graded stone aggregate) as in footings, foundation,beams, plinth beams, bases for columns and mass concrete etc complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilevers, shelves including supports complete all as specified.

Formwork for rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mils steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

5 mm thick plastering in CM 1:3 on concrete surfaces finished even and smooth with without using extra cement, complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed

Precast cement concrete 1:2:4 type B0 louvers and jallies 40 mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

Plain cement concrete 1:3:6, type C2 (using 40 mm stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

Reinforced cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in precast fencing posts and struts for fencing average sectional area exc. 100 sqcm but not exc. 250 sqcm including form work and fixing of posts at site complete all as specified and directed.

Mild steel work as in posts and struts in fencing including cutting tops to shape as required, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc ) including all necessary drilling, bolting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed.

Restraining, resecuring including making good staples for repair of galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

1.25 mm thick mild steel plain black sheet as in hearths, covering to door shutter, covering to door chowkats including reveting or welding as required including bending, turning up, mitered angles, stopped ends, outlets etc, complete all as specified and directed.

Preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new steel surface of any description n.exc 10 cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old surface of steel & iron work n. exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.all as specified.

Mild steel rag or lewis bolts 12 mm dia screwed one end with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised n.exc 15 cm long complete all as specified and diercted.

JANARDHANANDSONS

CHAUDHARY AND ASSOCIATES

M/s S.R lahoti

Bhirud Electric Stores