Certain repairs to floor, wall, joinery, plumbing and misc B/R work in OTM accn under AGE B/R-I, GE Gurdaspur.

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement ( upto and incld 12mtr ht) complete all as specified and directed.

All as per Srl item No 3 above but in CM 1:6.

M&L for rendering celing plaster 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces on celing and applying three coats of white wash complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

M&L for preparing newly plastered surfaces on walls and applying two coats of distemper oil emulsion paint over a coat of primer incl 1mm thick wall putty complete all as specified and directed.

Taking down chowkats or frames from the opening of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr

Taking down shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Taking down shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm and refixing in the same opening after making repair/adjustment each complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 x 60mm single/ double rebate including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including two coats synthetic enamel paint to exposed surface complete all as specified and directed.

S&F 35mm thick flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F IInd class hard wood glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F factory made solid PVC moulded door shutter,filled with wood free EPS of 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supply-ing & fixing in frame at site as per specification & drawing

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, opening as per specification & drawing.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&Fin repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire including bids staples complete all as specified and directed.

M&L in repair prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work fixed complete all as specified and directed.

S&F in repair incl hacking out old Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including oil putty complete all as specified and directed

S&F in repair incld hacking out old figured glass pin head type glazing with oil puty glass 3mm thick , fixed with oil puty in square n exe 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 300mm long mild steel sliding door bolts stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and directed.

S&F aluminium anodized barel tower bolt of extrud sec 150mm long complete all as specified and directed.

S&F aluminium alloyed handle cast type anodized of size 150mm long complete all as specified and directed.

S&F butt hinges med weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F in repairs 200mm long ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed. Note : Repair required on steel door frame, welding to be carried out or necessary alternative arrangements tobe done.

M&L two coats of synthetic enamel painting over one coat of pink primer on new wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces complete all as specified and directed.

S&F in repairs vitreous China Squatting pan 'Orissa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore complete Make CERA/HINDWARE/ PARRYWARE.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) wash down water closet (Pedestal pattern), complete, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device incld PVC (SWR) 'P’ trap of 110mm complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket complete all as specified and directed

S&F in repair flush pipe of polythylene of low or high density or PVC, 32mm dia for low level cistern complete all as specified and directed.

S&F in repair vitreous china wash basin white,flat back size 550 x 400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete all as specified and directed. Make CERA/HINDWARE/ PARRYWARE

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F rotational moulded polythene, triple layers,(white) water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete and including Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and directed.

All as per Srl item No 36 above but water storage tank 1000 Ltr capacity.

Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for reuse or removal to store complete all as specified and directed.

All as per Srl item No 38 above but 20mm bore of pipe.

All as per Srl item No 39 above but 25 mm bore of pipe.

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings complete all as specified and directed.

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings complete all as specified and directed.

S&F GI tubing 25 mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings complete all as specified and directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S&F in repair Jet spraywith PVC connection 600mm long.

S&F in repair pillar taps fancy type 15mm, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repair for 15mm bore stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed.

S&F in repair ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms.) complete all as specified and directed.

S&F in repair 15mm dia bib taps, cast copper alloy with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule chromium plated and fixed, fancy type complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 32mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.fixed to WHB complete all as specified and directed.

S&F in repair 40 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc fixed to kitchen sink complete all as specified and directed.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

Material & labour for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc water storage tanks exc 250 ltr & n.exc 500 ltrs and refixing for same opening including writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old ceiling surfaces applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated wall surfaces and applying one coat of white wash upto 12 meter height complete all as specified and directed.

M&L for preparation of old plastered surface by complete removal existing treatment and applying two coats of OBD over a coat of primer upto 12 meter height complete all as specified and directed.

M & L for preparation existing treatment removing surface of old decorated wall surfaces and applying two coat of cement based paint over a coat of primer upto 12 meter height complete all as specified and directed.

M & L for preparation old painted wooden surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation old painted steel surface and applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of old decorated plastered surface by complete removal existing treatment and applying two coats of weather coat painting and applying by complete all as specfied and directed.

M&L writing letter or figures (block roman, italic or Indian) n.exec 30cm high complete all as specified and directed.

S&F in repairs door closer hydraulicaly regulated ,univarsal type, aluminium body complete all as specified and directed.

S&F in repairs mild steel mortice lock, vertical type size 100mm 4 level complete all as specified and directed.

Petty repair to existing in built aluminium door , locks, hinges incl necessary making the lock/Glass/ adjusting shutter complete serviceable all as per existing pattern as directed by Engineer-in-Charge incl provision of duplicate keys as required.

Dismantling of roof brick tiles fixed in cement mortar in single layer incld demolition & removal of mud phuska complete all as specified and directed.

M&L for 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.

All as per Srl item No 69 above but except tiles.

Raking out joints in CM and M&L flush pointing to brick tiles in CM (1:3) laid on roof complete all as specified and directed.

Cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof padding complete all as specified and directed.

10 mm thick cement plaster in CM (1:4) using WPC on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

Supply only integral water proofing comound.

S&F 3 mm thick reinforced with polyster non wove fabric APP modified membrane of weight not less than 3.0 Kg/Sqm torch shield using gas burner including 150 mm side / laps over bitumen primer @ 0.3 Kg / Sqm and applying industrial bitumen tack coat 80/25 complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron or reinforced concrete drain pipes or any type, jointed in cement mortar and taking out of trenches, if required.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or laid in trenches with hauncing complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or laid in trenches with hauncing complete all as specified.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair PVC(SWR) 110mm bore bends any radius.

S&F in repair PVC(SWR) 75mm bore bends any radius.

S & F in repair 75/100/110 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement and PCC bedding surrounding complete all as spd and direccted.

S&F in repair harrison rails , mild steel, chromium plated with fixing brackets, stops, rollers (curtain road) etc complete all as specified and directed.

S & F in repair water tank covers black/white for 500/1000 ltr water tanks complete all as specified and directed.

Material and Labour for repairing by using FOSROC SOLUTION (mix as per manufacturer instr) for repair of RCC projections, chajjas, roofs, facia, soffits of roof slab etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1 : 2 : 4) using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of Finishes to match with the existing surfaces in at any height complete all as specified. Note: - Cost of formwork and welded mesh, bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness ( below or above ground level)

M&L for 40 mm thick PCC 1:2:4 type B1 using 20mm stone aggregate in as in floor including finishing even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work, in any position built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed by Engr-in-Charge.

Brick work with subclass ‘B’ bricks {burnt clay brick} straight or curved on plan exc. 6M mean radius built in cement mortar 1:4 using old size bricks complete all as specified and directed.

M & L PCC 1:3:6 type C 1 using 20mm graded stone aggregate) as in rounded on edges, kerbs etc complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving exc 15 cm thickness but above ground floors.

M&L plaster 15mm thick in CM 1:4 in sunken portion of slab with using water proofing compound complete all as specified and directed.

M&L for PCC 1:7:12 type F2 using 40 mm stone agg filling foundation and mass concrete in sunken floor complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed.

Dismantling of floor,hearth or wall tiling incl. cement morter bedding .

M&L for ceramic glazed coloured tiles of size 300x200x7mm/ 350x250x7/450x350x7 thick on and incl 10mm thick rendering in cm (1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/dado complete. Make:-Orient,Kajaria ,Johnson.

S&F Non - skid dark shade Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed. Make:-Orient,Kajaria,Johnson.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F in repair health faucet chromium plated with pipe , hanging arrangment and complete all as specified and directed.

S & F in repair 110mm PVC (SWR) branch piece, single (single Y) equal or unequaland complete all as specified and directed.

S & F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal and complete all as specified and directed.

Taking down chowkats or frames from the opening of size not exc 1.5 sqm each with shutters (without taking off shutters from the frames) (windows) complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-2 using 20mm stone aggregate in plinth protection including finishing even and smooth without using extra cement complete all as specified and directed.

KAILASH CONSTRUCTION CO

Harbhajan electric co

D.RAJ And CO.