Supply and Fixing of Furniture for New Station Building of Ayodhya Railway Station UP

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

BoQ 3 (Item Rate)

Total Amount of BoQ3 (Item Rate)

Description of Work / Item(s)

Amount

SUPPLY AND FIXING OF FURNITURE

Supplying and placing in position Table of size (W)1800 mm x (D)900 mm x (H) 740 mm. Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate. Flat edge Duly sealed with 2 mm thick PVC beading.The modesty panel shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU LHS size shall be 1550 Width x 450 Depth x 705 Height.The top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat of cushioned seat made of injection molded plastic outer & inner. Plastic inner upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Providing and Placing Visitors Chair with overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame through chrome plated high pressure die casted connector pipe. The office seat should be supported by shiny chrome base with sturdy nylon castors. The product shall be complete as per the approved sample and as per the direction of Engineer-In-Charge.

Supplying and placing in position three seater sofa of size:- (L)1650mm X (D)750mm X (H)710mm. Sofa seat, back and arms to be made up of solid pine wood with hot pressed ply wood and upholstered with foam of high density with leatherite. Seat of Sofa to be layered with silicon fiber filling over high density foam. The seat cushion should be of multi layered foam of density 40D. The seating cushions to have 2.75 & 1.75 inches of elastic webbing. The thread used should be nylon bonded. The sofa will have contoured shape with complete back support, padded back and bordered arms. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position of the back cabinet cum display unit of size:- (L)1000mm X (D)450mm X (H)1800mm of approved design. The Unit shall comprises of glass shutters above the desk level and wooden shutters for storage below desk level. The unit to be constructed from engineered wood and finished in approved colors. The product shall be complete as per the approved sample, colour and design and as per the direction of Engineer-In-Charge.

Supplying and placing in position executive Tableof size 1500mm (L) X 600mm (W) X 750mm (H), Table top shall be made of 25mm thick pre-laminated particle board of approved shade. Table Top working edges shall be provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. Table top to be supported on side panels and modesty panel made out of 18mm thick pre-laminated particle board laminated on both sides as approved shade. The working or nonworking edges shall be provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. The table shall be provisioned with open Side unit of size 900mm (L) X 450mm (W) X 750mm (H) mm. Side unit top shall be made of 25mm thick prelaminated particle board matching with table top. Side unit backing shall be 9mm thick pre-laminated. Side unit having a openable storage with one one shelf. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position of 360 degrees revolving high back chair of Size :- (W)600mm X (D)660mm X (H)1275mm with soft fabric upholstery encasing high-density cushions. The backrest should conforms to natural curvature of the spine. The chair to have Synchro Single Locking Mechanism, Tilt Tension Control along with the adjustable headrest and solid nylon base with 55mm castors for an easy smooth movement.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position of cantilever medium back chair of Size :- (W)590mm X (D)490mm X (H)980mm. Max seating ht.665mm with soft fabric upholstery and premium virgin foam atop a 14 mm thk boiling waterproof plywood forming the moulded seat. The chair base to be of powdercoated metal and the backrest should conforms to natural curvature of the spine.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position three seater sofa of size:- (W)2100mm X (D)865mm x (H)815mm with slender curves, comfortable seating and vegan leather upholstery, stain and fade resistance. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position single seater sofa of size:- (W)1040mm X (D)865mm x (H)815mm with slender curves, comfortable seating and vegan leather upholstery, stain and fade resistance. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position center table of size:- (L)1130mm X (W)630mm X (H)460mm with 8mm toughened glass tabletop inlaid onto solid woodden frame and designer wooden legs. The product shall be complete as per the approved sample, design, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position side table of size:- (L)680mm X (D)530mm X (H)460mm with 8mm toughened glass table top inlaid onto solid woodden frame and designer wooden legs. The product shall be complete as per the approved sample, design, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position of three seater seating of size- : (L)1820mm X (D)690mm X (H)790mm. Seat & back single section, Seat is 410mm from ground, made up of Perforated stainless steel, the Seat thickness is 1.15mm and Seat width is 52. Beam of MILD steel with power coating thickness 1.6mm, Stainless steel border for every seat & back, Stainless steel handles & die pressed legs at the end of chairs, The steel is of Grade 202. The product shall be complete as per the approved sample and as per the direction of Engineer-InCharge

Supplying and placing in position center table with wooden top of size:- (L)1130mm X (W)630mm X (H)460mm.The table to be made of Solid Beech Wood with glossy finish . The product shall be complete as per the approved sample, design, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position wooden lounge chair of size:- (L)700mm X (D)850mm X (H)900mm comprises of well-cushioned seat upholstered in leatherette with seam stitch detail on the backrest and seat cushion and solid wood arms polished to a pristine shine. The chair frame to be made from pure solid wood for a sturdy finish. A matching cushion isto be provided to ease the stress on back. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position of two seater sofa of size:- (L)1100mm X (D)780mm X (H)740mm with Premium Leatherette upholstery and no arms. The product shall becomplete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position of Modular table of size 1200mm (L) X 600mm (W) X 750mm (H), Table top shall be made of 25mm thick pre-laminated particle board of approved shade with working edges provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. Table top supported on side panels and modesty panel made out of 18mm thick pre-laminated particle board laminated on both sides as approved shade. The working or nonworking edges shall be provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. Provision of 400L x 450W x 725Ht Fixed Pedestal of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated Particle Board with PVC edge banding. All drawers shall have a central lock mechanism. PVC keyboard tray and Metal CPU Trolley. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position bedside drawer with locker of size (W)400mm x (D)420mmx(H)840mm having one drawer unit and one cabinet unit fitted with Cam lock.The locker top should be of 0.8mm thick SS 304 Grade sheet. Gap should be provided between the drawer and cabinet unit for storage The SS sheet to be finished in buff-matt finish. Drawer to be of 1 mm thick CRCA sheet with fitted ball slides for smooth drawer movement.Lock Cabinet also to be 1 mm thick CRCA sheet fitted with hinge door and lock and should have louvers for ventilation. Back of the locker provided with vertical spacer made of nylon. It has to be uniformaly distributed total load bearing capacity of 20 kg with qood quality "Co2 Argon" process welding. All metal components to be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyster powder coating for bacterial protection.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position hospital stool of size (L)411mm x (W)411mm x (H)522mm with top made of SS 304 sheet with buffed matt finish. MS square tube of section 25 x 25mm with thickness of 2mm to be used for framework. Thermosetting epoxy polyester powder coating is to be done for all MS parts and Neoprene shoes to avoid the wear & tear of the product is to be provided . The Safe working load to be atleast 135kg.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position hospital bed of size: (L)2207mm X ( W)1060 mm X (H) Adjustable from 475mm to 755mm with 5 function mechanically operated bed viz. Hi-Lo, Trend/ Reverse trend, Back rest and Knee rest and lower knee rest.Back rest angular movement: 70 deg; Knee rest angular movement: 24 deg. Trendlenburg 10 degree and Reverse trendlenburg 8 degree. Safe working load: 200 kgs, Patient load bearing capacity: 135 kgs. All edges in contact with patient to be rounded safely. Head & Foot board should be made of blow molded Poly propylene with anti microbial additives and should be with metal inserts to mound it on bed frame. Removable PP head board and foot board should have cut outs for better gripping. The boards should have provision to paste colour stickers. The stickers should made of PP material and pasted with 3M adhesive. Bed frame should be made of MS ERW oval shaped tube of size 30mmx60mm of 1.6mm thick. All corners of bed frame are provided with bumper mounting holders and should have provision for IV pole holders & 2 patient lifting pole holders. It is strengthened by rectangular pipe section of size 60mmx30 mm having 1.6 mm thickness.Lying surface should be made of CRCA sheet of thickness of 1.2mm thick and should have 4 sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is provided with Ratchet for leg rest adjustment. Mattress platform is strengthned by tubular frame of size 25.4mm dia x 1.6mm thickness. It should be strengthned by trapizodal contour embossed cut out. All metal components should be pre treated with zinc phosphating and then powder coated with anti microbial epoxy polyster powder coating. Bed mechanisim is made of linkages which are made by HR MS flat of size 40mmW x 10mm thick. This mechanism should be operated with the help of lead screws and crank. Lead screws should be made from EN8 and ACME threads roll formed. It should be functioning on the basis of Synchornised Linear Roller Mechanism(SLRM). SLRM is assisted by tension spring covered with telescopic tube with plastic end gaps.

All 4 functions are operated with the help of 4 ergonomically dedicated handles, which are made of metal inserted PP co polymer, it should be snap locked when not in use. All the four handles should be provided operating guidence stickers for Neoprene rotating bumpers of dia 92mm height. 40-50 shore hardness are provided at four corners to protect the bed and patient from impact and avoid damages to wall The bed should have 125mm wheel dia, with PU tread synthetic body castor, non marking castors. Out of 4 castors two should be provided with toe break, mounted at diagonally opposite position. The crank handle should be Ergonomically designed plastic handles having outward locking mechanism in 90 deg position. Handle levers fold compactly upwards with snap fit when not in use. Handles are self locking with a brass insert and a chrome plated knob with a Nylon grip. The bottom Bed frame should be made of MS ERW oval shaped tube of size 30mmx60mm of 1.6mm thick. It should be strengthned by two cross member tubes of dia 35x3mm thick. Base frame should have ground clearance of 165mm to avoid any obstruction during bed movement. base frame's foot print should inside the bed frame for ease of access to medical professionals. Base frame should have provison to mount oxygen cyclinder cage. It should have trendlenburg indicator guideThe bed should be provided with one pair side rails pull to turn down collapsable type.

Side rails should be made of MS ERW tube having 25.4mm dia and 1.6 mm thick. The side rails should get locked when raised. The knob should be made out of Injection molded Nylon for ease of operation. The locking of side rail pin should be fitted with SS liner to prevent rusting and wear and tear. Side rail joints should have plastic bushes and couplings.The bed should have urine bag holder on both side of the bed.The bed should ensure qood quality welding " Co2 Argon" process . All metal components should be pre treated with zinc phosphating in 7 tank process and then powder coated with anti microbial epoxy polyster powder coating to fulfill the requirements for bacterial protection.

Supplying and Placing in position foldable wheel chair of size (L) 790mm x (W) 600mm x (H) 870mm. The Foldable frame structure to be made of section 22x1.2mm A3 carbon steel with chrome finish. Cross bar made of A3 carbon steel with section 25.4 x 1.2mm. Rear wheel is made of 24 inch Solid mag wheels with alloy in the rim. Integrated handrim is provided to drive the wheel chair of section 16x1.2mm A3 carbon steel with chrome finish the front wheel is of 8 inch HUB made of PA polymer and outer with solid rubber PU molded arm rest & base made of ABS for better arm support. Leatherite strap for calf rest & leatherite cushion for seat. Foot rest to be Adjustable alluminimum die cast with updown & swivel type mechanism. Push Handles made of moulded rubber grip to push the wheelchair. Hand brakes also to be provided to lock the wheelchair at desired location. Anti rust chrome finsh extended base with molded plastic for better grip and chair safe working loadto be minimum 100kg.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position 4 section hospital bed mattress of overall size (L)1965mm x (W)830mm x (H)100mm provided with 40 density 100 mm thick PU foam which is covered by heavy helium water proof material , flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position King bed of Size: (W) 1875 mm x (L)2046 mm x (H) 901 mm. The bed Structure should consist of metal frames made of M.S. Channels of 1.0mm Thickness. Horizontal plinths and bottom plinth made of 25 mm thick Prelaminated Particle Board IS:12823 Class El (as per EN13986). Plinth support assembly to be made of M.S. 25 mm square pipe in 1.2 mm thickness. Head board of 18 mm thick Prelaminated Particle board IS:12823 Class El (as per EN13986) with 2mm edge banding glued with Hot Melt EVA glue. Tail board made of 18 mm thick Prelaminated Particle board IS:12823 Class El (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue. Side rail to be made of 18 mm thick Prelaminated Particle board IS:12823 Class El (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue. Mattress panels of Bed made of 18 mm thick Prelaminated Particle IS:12823 Class El (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge

Supplying and Placing in position regular ortho mattress of size 78 inch x72 inch x 4 inch thick with both side usable function. The Mattress should be made up of complete bonded foam and to be covered of 240 GSM premium knitted fabric for aesthetic look.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position Single twin bed of Size: (W) 1131 mm x (L)2060 mm x (H) 945 mm. The bed Structure should consist of metal frames made of M.S. Channels of 1.0mm Thickness. Horizontal plinths and bottom plinth made of 25 mm thick Prelaminated Particle Board IS:12823 Class El (as per EN13986). Plinth support assembly to be made of M.S. 25 mm square pipe in 1.2 mm thickness. Head board, Tail board and siderail to be made of 18 mm thick Prelaminated Particle board with IS:12823 Class El (as per EN13986) with 2mm edge banding glued with Hot Melt EVA glue. Tail board made of 18 mm thick Prelaminated Particle board IS:12823 Class El (as per EN13986) with 0.8mm edge HDF foil wrapped decorative foil wrpped trims fixed to them and the Mattress panels of Bed are to be made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and Placing in position regular ortho mattress of size 78 inch x36 inch x 4 inch thick with both side usable function. The Mattress should be made up of complete bonded foam and to be covered of 240 GSM premium knitted fabric for aesthetic look.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position side table of size:- (L)500mm X (D)420mm X (H)450mm with drawer, open shelf and contrasting handles. The complete unit shall be made out 18mm thick prelaminated particle board of approved shade with all the working and non working edges covered with PVC edge banding. The product shall be complete as per the approved sample and as per the direction of Engineer-In-Charge.

Supplying and placing in position of two door wardrobe of size:- (L)760mm X (W)450mm X(H)1800mm. Inside : Single hangar unit combined with shelves for sectioned spaces for clothes and apparel. The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

Supplying and placing in position 4 Door personal Locker Unit of size: (W) 380mm x (D) 450mm x (H) 1830mm. Stackability shall be such that add-on units can be stacked width wise to form bank of lockers having common side panel. Locking should have 10 Lever cam lock with lock lever plus option of hasp arrangement. The Material of the PLU shall be CRCA 0.6 mm thickness with rigid knockdown construction. The shelf shall have uniformly distributed load capacity of 35 Kg for each shelf. The Finish shall be epoxy polyester powder coated to the thickness of 50 microns. The Handles / Label holder shall be snap fit ABS plastic handle with Provision of punched pattern ventilation.The product shall be complete as per the approved sample, colour and as per the direction of Engineer-In-Charge.

MANNU LAL AND SONS

Arterior Infra Solutions India

Swani Furniture Point Pvt. Ltd.

Durian Industries Limited

N S Associates Pvt Ltd.

MANNU LAL AND SONS

Arterior Infra Solutions India

Swani Furniture Point Pvt. Ltd.

Durian Industries Limited

N S Associates Pvt Ltd.

MANNU LAL AND SONS

Arterior Infra Solutions India

Swani Furniture Point Pvt. Ltd.

Durian Industries Limited

N S Associates Pvt Ltd.