Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.3 L+₹4.7 L (16.8%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹32.6 L+₹4.9 L (17.7%)Rejected-AOC 1331 GENERAL GANJ OPP WATER TANK MATHURA 281001 | MATHURA | UTTAR PRADESH | 281001 | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹34.8 L+₹7.1 L (25.6%)Rejected-AOC | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹34.9 L+₹7.3 L (26.2%)Rejected-AOC | L5 | Rejected-AOC Other than L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
21 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mathews M Shepherd, GE
Mathura Cantt
SPECIAL REPAIR TO BLDG NO P-85B (OR LIVING ACCN) UNDER GE(WEST) MATHURA
2023_MES_584710_1
8300/1133/E8
Open Tender
Civil Works
Item Rate
180 days
GE (W) MATHURA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹76,000
Yes
1 Apr 2023
7 Mar 2023
22 Mar 2023
7 Mar 2023
21 Mar 2023
16 Mar 2023
Amount
Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.
M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished surface fair and even without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a one coat of primer on walls complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:4) on fair finished faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applying two coat of white wash including preparation of surface complete all as specified and directed.
M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required shall be deemed included in the unit rate quoted by the contrator.
Taking up or down steel tubing 15mm bore pipe complete all as specified and directed.
Taking up or down steel tubing 20mm bore pipe complete all as specified and directed.
M&L GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed.
M&L GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed.
Dismantling brick/concrete tiles any size etc including existing roof treatment of any thickness complete all as specified and directed.
M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer @ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.
S&F precast hydraulically pressed PCC tiles of size 25cm x 25cm x 20mm thick laid over and including screed bed 15mm thick in CM (1:4) set and jointed in neat cement slurry and pointed in CM (1:3) mixed with WPC of approved make in screed bed and pointing on roof complete all as specified and directed.
M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of cement based paint on walls complete all as specified and directed.
M&L for preparation of old painted surface and applying one coat of weather prrof paint of Dark Shade on wall, complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.
Taking down eaves gutters and rain water pipes, soil waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
M&L 100mm CI pipes soil, waste and vent pipe centrifugally cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F 100mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.
S&F 100mm CI bends (any radius), diminishing pieces or tapers with oval access door (larger bore measured) complete all as specified and directed.
S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) without oval access door or with parallel branches complete all as specified and directed.
S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door or with parallel branches complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L 75mm CI pipes soil, waste and vent pipe centrifugally cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F 75mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.
S&F 75mm CI bends (any radius), diminishing pieces or tapers with oval access door (larger bore measured) complete all as specified and directed.
S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) without oval access door or with parallel branches complete all as specified and directed.
S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door or with parallel branches complete all as specified and directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutters 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.
S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.
S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.
S&F 150mm long stainless steel handles, oval type complete all as specified and directed.
S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.
S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type (min weight 400 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.
S&F in repair 15mm bore CP pillar taps Fancy type cast copper alloy along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.
S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm with and waste fitting of PTMT, PVC connection and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed.
S&F in repair CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.
S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.
S&F in repairs vitreous china urinal, half stall type, white incl 15mm bore push tap any colour of PTMT screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixing discharge pipe, flush pipe, grating and union for discharge, complete all as specified and directed.
S&F in repair Corner Glass shelf assembly of size 300mm x 300mm including bracket fixed to wall with PVC slips and stainless steel screw complete all as specified and directed.
S&F in repair vitreous china was down, water closet pan (pedrestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified & directed.
S&F in repair PVC valve less, syphonic action type, flushing cistern 10 ltr capacity, low level, white/ coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.
Dismantiling floor, hearth or wall tiling including cement motar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 15mm thick rendering on brick work/concrete surfaces in cement mortar (1:4) for skirting /dado finishes complete all as specified and as directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortor (1:6) for laying floor finishes. complete all as specified and as directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortor (1:6) for laying floor finishes. complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in skirting/dado including 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed and bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes size complete all as specified and directed.
M&L for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including cement plaster 15 mm thick in CM (1:4) laid and jointed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.
Taking down wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk complete all as specified and directed. Note :Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items
M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken portion complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note : Liquid WPC shall be measured and paid sapertaly.
Supply only Liquid water proofing compound of approved complete all as specified and directed.
S&F GI spout pipe 50 mm dia tubes, "light grade" galvanised, with all fitting; laid in treanches complete all as specified and as directed.
Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.
Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.
S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.
S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.
M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.
S&F factory made 35mm thick, IInd class hard wood plain, framed, panelled shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.
S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.
M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F Aluminium handles fabricated type anodised of size 150mm long, complete all as specified and directed.
S&F 150mm powder coated Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised sliding door bolts with hasp, staple and fixing clips of sheet, cast or extructed section and fixing bollts and sliding bolts of extruded section or cast aluminium ally and fixed complete all as specified and directed.
S&F 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each shape complete all as specified and directed.
S&F 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane including hacking out old glass complete all as specified and directed.
S&F in repair stainles steel wire cloth 0.25 to 0.36 mm nominal dia of wire and avg width of aperture 1.4 mm to 2mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F in repairs curtain rod, stainless steel of 20mm dia with fixing brackets stop rollers etc fix complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity white colour triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling old water tank complete all as specified and directed.
M&L for Keyed pointing in CM (1:3) to brick-tile fecing, with tiles laid flat in stretcher course complete all as specified and as directed.
M&L for 75mm thick cement concrete type C-2, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.
S&F in replacement 18mm thick Celuka PVC Board of Single Side Prelam/Rigidlam colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets/study tables top etc incl necessary fittings such as hinges, sliding rails etc complete as per specifications and as directed by the Engineer-in-Charge (Density - 575 to 600 Kg/CBM)
Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc completeall as specified and directed.
M&L for point wiring complete with 1.5sqmm single core FRLS ISI marked PVC insulated cable with multi stranded copper conductor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for concealed conduit as directed at site including chase cutting for one light/fan point controlled by one switch including MS sheet sunken box concealed in wall duly painted inside with one coat of red oxide primer and two coats of black bituminous paint in out side with 3mm thick Polycarbonate based sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLS, PVC insulated copper cable as continuous earth connected to comman earth and earth dolly including making good the disturbed surfaces complete all as specified and directed.
M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick Polycarbonate based sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLS multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfacescomplete for one socket 20 Amp socket outlet controlled by one switch on independent board.
All as per item No 95.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on independent board.
All as per item No 95.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on the same board with other switches.
M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 votls grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia and 1.75mm thick ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes modular type suitable for fixing of modular face plate, plate cover for mounting modular switches, sockets, fan regulaters etc incl 2.5 Sqmm FRLS multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.
S&F socket out let ,6 pin 5 and 15 Amps multi purpose 2 in 01 flush type 230 volt complete all as specified and directed.
S&F socket 5 Amps 5 pin flush type , 230 volts complete all as specified and directed.
S&F switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.
S&F switch piano flush button single pole, one way 15 Amp 230 Volt complete all as specified and directed.
S&F ceiling rose 65 x 50 mm three terminal, polycorbonate body complete all as specified and directed.
S&F lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.
S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500k colour temp complete all as specified and directed.
S&F bulk head LED light of 10 W, IP - 66, environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and as directed.
S&F 10W decorative LED mirror light environment friendly, ultra modern, energy saving, surface mounted decorative with LED light, complete all as specified and directed.
S&F surface and wall mounted 20 watt LED batten, PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
S&F stepped type electronic fan regulator switch type 230 Volts complete all as specified and directed.
S&F ceiling fans (5 Star rated by Bureau of energy with service value of not less than 8.40) BLDC, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply all as specified and directed
S&F Exhaust fan metallic body of size 300 mm sweep, 50 Hz, AC 240Volt, 900 RPM, dynamically balanced impellers for smooth & vibration free operation, pre-lubricated double ball bearing for maintenance free running with aerodynamically designed & balanced blade, air delivery 1275 Cum/hr, noise level 40dB- 45dB and power consumption (50 W±10%) heavy duty single phase supply including mild steel louvers all as specified and directed.
S&F Geyser 25 ltr capacity in 5 Star rating, digital display, feather touch panel, shock safe plug, incoloy glass coated element, feroglass technology, PUF insulation 0.8 Mpa high working pressure, Whirlflow technology, IPX-4 protection suitable for, 50 Hz, AC 240Volt, single phase supply, white blue with overall length approx 620 mm with wall mounting accessories & 02 Nos flexible pipe connections all as specified and directed.
S&F 15mm bore Stop valves fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F bib cock 15mm dia cast copper alloy fancy type with crutch of butterfly handle screwed down for iron pipe complete all as specified and directed.
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit ISI marked 25 mm dia with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.
S&F MCB SP 240 volts, 6-32 Amps, 10KA, C-Series complete all as specified and directed.
S&F MCB SPN 240 volts, 32 Amps 10KA, 'C' series complete all as specified and directed.
S&F in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F factory made sheet metal enclosers distributed board double door three phase 415 volts 8 way for MCCB 160 Amp, 4P as incoming and MCB (TP/SP) as outgoing comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed. Note : (i) The DB shall be VTPN specified makes listed in Appendix 'B'. (ii) The DB Shall be flush fixed and making good the distrubed surface matching with existing specification shall be part of job at no extra cost. (iii) Connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin / bottle type thimble-properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.
S&F in renewal of MCCB 4 pole 160 Amps, 415 volts, 16 KA rupturing capacity with adjustable thermal & magnatic setting complete all as specified and directed.
S&F MCB SPN 240 volts, 40 Amps 10KA, 'C' series complete all as specified and directed.
S&F in repair building security light of 30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed.
S&F in repair sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of 20 Amp all as required at site or directed complete all as specified and directed.
Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size all as specified. Note: Earth work and other connected work shall be measured & paid sperately.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pierholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft or loose soil complete all as specified and directed.
Returning, filling, in including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning and covering clean and dry sand to underground electric cable in trenches / floor complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.
M&L for bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.
S&F GI tubing light grade 50 mm dia along the wall/ in trenches/in duct/ in culvert/ road crossing and including provisioning of sitable mild steel flat iron clams and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.
Deepak Saxena
JWALA ELECTRIC CONTRACTORS
VANI CONSTRUCTION
R N AGRAWAL
Shiva Traders
M/s Hoti Lal Contractor
SHREE RADHIKA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .