Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹49.1 L
EMD Value
₹98,140
Closing Date
16 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Street Light poles with LED light fittings at Foundry and Forge Division HAL BC
8091
FM/NE-P/Advt./05/24-25 Dt:15.06.24
Works
Electrical Planning and Contract Section-E and M Dept-FMD-Bangalore
₹0
₹98,140
16 Jul 2024
19 Jun 2024
19 Jun 2024
16 Jul 2024
HINDUSTAN AERONAUTICS LIMITED FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: " Providing Street Light poles with LED light fittings at Foundry & Forge Division HAL (BC)." Cont.No: HAL/FMD/ER-2930/24-25
Name of the Contractor :
BILL OF QUANTITIES WITH SPECIFICATIONS
The tenderers are requested to read the following before quoting:
1 The payment terms shall be governed as per the terms indicated in General conditions of contract.
2 Basic Rate to be quoted for each item.Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.
3 Sucessful offer that is L-1 (Lowest offer) will be determined including GST.
4 Amount towards GST will be paid along with RAR payment against invoice.
5 The tenderers are requested to abide by the rules of prevailing GST act.
6 This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.
Sl. No Specification of item Quantity Unit Rate in Figs excluding GST Rate excluding GST in words Amount Excluding GST in Figs (E=C*A)
1 Supply, fixing on existing foundation, installation, testing and commissioning of 7 metre Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter with single arm bracket of 1500mm. The Base plate size should be of 200X200 mm with 12mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. The scope includes supply & fixing of heavy duty 32A terminal connectors for loop-in / loop-out arrangement at bottom of the inside pole to terminate cable of size 2runs of 4C x 6sq.mm Aluminium cable and 3Cx1.5Sqmm flexible copper cable. Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note:1-Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2.Civil works for the Foundation will be measured seperately at BOQ Sl.No.13. 60 Nos 0.00
2 Supply, fixing on existing foundation, installation, testing and commissioning of 7 metre Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter with with double arm bracket of 1500mm. The Base plate size should be of 200X200 mm with 12mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A.. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. The scope includes supply & fixing of heavy duty 32A terminal connectors for loop-in / loop-out arrangement at bottom of the inside pole to terminate cable of size 2runs of 4C x 6sq.mm Aluminium cable and 3Cx1.5Sqmm flexible copper cable. Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note:1-Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2.Civil works for the Foundation will be measured seperately at BOQ Sl.No.13. 15 Nos 0.00
3 Supply, fixing on existing foundation, installation, testing and commissioning of 7 metre Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter with with Cicural or Triple Arm bracket. The Base plate size should be of 200X200 mm with 12mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A.. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. The scope includes supply & fixing of heavy duty 32A terminal connectors for loop-in / loop-out arrangement at bottom of the inside pole to terminate cable of size 2runs of 4C x 6sq.mm Aluminium cable and 3Cx1.5Sqmm flexible copper cable. Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note:Note:1-Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2.Civil works for the Foundation will be measured seperately at BOQ Sl.No.13. 3 Nos 0.00
4 Supply, fixing on existing pole using suitable fixing hardwares and testing & commissioning of Street light LED light fixture of wattage not exceeding 70watts and lumens output not less than 7700lumens with necessary interconnections consisting of pressure die cast aluminum housing with powder coated paint, optical lenses suitable for heat resistance polycarbonate/ PMMA with IP66, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K+5%, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-chage. The luminaire shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.9. The fitting shall have internal surge protection of 4KV and external surge protection of 10KV. LM 79 certification for luminare & LM80 certificate for LED shall be produced. LED used in the luminaire should be one of approved make as per approved make list of HAL. Make/model of Street light LED fixture: Bajaj ENXT P 84L WH PO PC SD or Equivalent model of other approved makes. 99 Nos 0.00
5(a) Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 4Cx6 Sqmm PVC/XLPE, insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed and as per technical specification. 3000 Mtrs 0.00
5(b) Supply and connecting indoor type cable end joints suitable for 4Cx6Sqmm LT cable of 1.1 KV gr., Aluminum conductor PVC/XLPE insulated armoured LT UG cables by employing necessary glands, terminals, bolts & nuts etc., complete in all respects. 30 Nos 0.00
6 Supply, drawing inside the Pole of 3Cx1.5 sqmm 1100V gr. PVC insulated unarmoured copper Cable and connecting from connector using necessary lugs, upto the light fixture complete in all respects. (for connecting the light fixtures from connector inside pole). 1000 Mtrs 0.00
7 Carrying out Mechanized Horizontal directional drilling of soil under the existing road/gate way for drawing 1run of 40mm dia HDPE pipe including supply and drawing 1 run of 40mm dia PE100 PN08 HDPE pipes, any ISI approved make conforming to IS 4984:1995 including suitable jointing using welding as required, providing pull tapes in the laid HDPE pipe, ends brought out, the brought out ends shall be sealed with suitable material to prevent soil and water entry and buried under soil. A cement concrete route marker shall be grouted in the soil above both the end of pipes with mark "End of pipes 1Rx125mm". The work includes making suitable access pits, closing the pits and making good damages as original etc complete as directed by Engineer in charge. 1500 Mtrs 0.00
8 Supply and laying of 40mm dia, PN8 HDPE pipe of confirming to IS 4984:19955 in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 1000 Mtrs 0.00
Supply, installation, testing and commissioning of Outdoor weather proof 2rows 24 module module distribution board of Hensel Cat. No.KV 9224 M or equivalent in Legrand/ Hager/ Schneider make including suitable locking facility by means of built in lock with profile cylinder with set of Key's and with suitable size cover, cable entry on one side. The DB shall be mounted at suitable height on the wall using suitable size MS angle/channel frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 with necessary interconnections between incoming and outgoing MCB's, contactor and timer using suitable size flexible copper wires and comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge. 10 Sets 0.00
a) 1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with one channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.
b) 1No- 32A 230V gr.10KA 4P MCB with overload and short circuit protection.
c) 1No-25A, ML1.5 contactor of L&T Cat.No.SS91851 with contactor coil suitable for 230V Single phase supply.
d) 3Nos, 6-32A, 230V Gr, 10KA SP MCB with overload and shortcircuit protection.
10 Excavation in all types of soil for Cable trench & refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. 350 Cu.Mtrs 0.00
11 Concrete cutting/Chipping the existing 1:2:4 cement concrete road /pavements/Bitumen Road / flooring of 150mm thick including removing debris from the work site as directed by the Engineer-in-charge. 6 Cu.Mtrs 0.00
12 Re-concreting the cut portion with 1:2:4 cement concrete by employing 20mm graded aggregate granite, smooth finish including curing, complete in all respects and as directed. 6 Cu.Mtrs 0.00
13 Supply & providing of 1:2:4 cement concrete pedestal for erection of pole of minimum size 600X600X1400MM (200mm above the ground level) using 8mm &12mm TMT bars, suitable for fixing of J-bolts and base plate of the octagonal pole including supply and embedding of 2 Nos. of 500mm length 40mm dia HDPE pipe with suitable bends at the ends for encasing incomming and outgoing cables complete in all respects as directed by engineer in charge.(Notes: 1) Refer foundation drawing. 2) J-Bolts/nuts/base plate are included in BOQ Sl.Nos.1, 2 & 3). 78 Nos 0.00
14 Disconnecting/dismantling & removal of existing RCC/PCC street light poles including foundation work as-is-basis without any damage and handing over the same to the place as shown by Engineer-in-charge/Plant Maintenance department of Foundry & Forge Division ( not more than 1KM ) including loading, transportation, unloading etc., complete in all respects and as directed by the engineer-in-charge. 15 Nos 0.00
Total Amount Excluding GST 0.00
Add 18% GST 0.00
Total Amount Including GST 0.00
Total Amount inclusive of GST In Words
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qualification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/ER-2930/24-25
Name of Work: Providing Street Light poles with LED light fittings at Foundry & Forge Division HAL (BC).
Estimated Amount in Rs.: 4907000
Tender Notice Date: [DD/MM/YYYY] 06-15-24
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual /firm /company
2 Type of ownership PleaseEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Please enter Details of Constitution
4 Address for correspondence: Please Enter Address
5 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)
Name of the Bank
Type of Account
6 PAN No.: Please Enter Pan NO
7 Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs: Enclosed / Not Enclosed REMARKS 5000000 2
2022 – 2023 Rs: Please Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 1472100.00
Avg Annual Turnover criteria is not met 10000000 1
8 Details of Registered Contractor
If Registered Contractor with HAL Yes/ No [for Similar nature of work] Documentary proof to be Uploaded to e-Procurement Portal * Category: E = 75.00 Lakhs upto ` 100 Lakhs F = 50.00 Lakhs upto ` 75 Lakhs G = 25.00 Lakhs upto ` 50 Lakhs H =10.00 Lakhs upto ` 25 Lakhs I = 5.00 Lakhs upto ` 10 Lakhs J = 2.00 Lakhs upto ` 5 Lakhs K = Below ` 2 Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
9 PF No.: Please Enter PF NO
10 ESI No.: Please Enter ESI NO
Location of Agency/organisation: Please Enter GST Details
Any Special Status of the Unit i.e. DTA, EOU, SEZ, FTWZ
Registered under regular scheme or Composition Scheme or Not Registered Related Document to be uploaded in ePortal
12 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Please Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #REF!
13 Valid Electrical contractor licence of appropriate voltage issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time Please SELECT YES OR NO
14 I.T Returns for past 03 years 999999 5 J 6
Assessment year 2023-24 Please Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
Assessment year 2022-23 2499999 4
Assessment year 2021-22 2500000 3
15 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender. solvency cal
Name of Bank & Branch: Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs 06-15-24 28-Jun 0 40000
Date of Issue[MM/DD/YYYY]: 200000 40000
Value of Rs. In Rupees: 200001 150000
Solvency value is NOT as per NIT
16 Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following: [Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender. 1962800 500001 250000
Completed similar works during last 7 years Please Select %of similar works completed during last 7 years 1000000 250000
Work No I Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: 2000000 500000
Completed value of Work in Rs. Lakhs: 2000001 1000000
Date of Commencement of Work [DD/MM/YYYY] 4000000 1000000
Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000
Work No II Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Please Enter Details for Work No II
Completed value of Work in Rs. Lakhs:
Date of Commencement of Work[DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]: work done
Work No III Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 06-15-24 2555
Brief Description of Work: Please Enter Details for Work No III 06-17-17
Completed value of Work in Rs. Lakhs:
Date of Commencement of Work[DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
17 Details of person holding the power of Attorney :
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Please Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
18 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under Pre-qualification criteria, technical bid ( Page 1 to 169) and price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work. Please Accept the Declaration I
19 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I//We are aware that document sought only be uploaded for evaluation of offer. 5.I/We shall not associate nor has been associated in the past, directly or indirectly with consultant or any other entity that would prepare the design, specification and other documents of the project. Please Accept the Declaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
PreQualification_FreeView_ER2930.pdf
TENDER_DOCUMENT • 0.04 MB
Tender_Drawing_No_1.pdf
TENDER_DOCUMENT • 1.25 MB
Tender_Drawing_No_2.pdf
TENDER_DOCUMENT • 0.18 MB
Price_Bid_ER2930.pdf
TENDER_DOCUMENT • 0.09 MB
Tender_Notice_ER2930.pdf
TENDER_DOCUMENT • 0.12 MB
Technical_Bid_ER2930.pdf
TENDER_DOCUMENT • 1.91 MB
Price_Bid_ER_2930.xlsm
TENDER_DOCUMENT • 0.07 MB
ECS_Format.pdf
TENDER_DOCUMENT • 0.01 MB
CheckList_ER2930.pdf
TENDER_DOCUMENT • 0.03 MB
Pre_Qualification_ER2930.xlsm
TENDER_DOCUMENT • 0.03 MB
Undertaking_Letter.pdf
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .