SR OF B NO T37 AT FIRE AND FURY COMPLEX SR OF INTERNAL ELECTRIFICATION CONNECTED WKS AT B NO P25 SR TO COOK HOUSE AND WASHING PT OF B NO P41 AT 14 CORPS OP SIG REGT PROVN OF 1 TOILET IN OPS ROOM AT HQ LEH SUB AREA COMPLEX AND CERTAIN MW UNDER GE 865

Amount

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed.

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron ploythene film and 3mm thick foam as per manufacturer's instructions, including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement all as specified and directed.

M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to walls of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

Dismantling timber scantling 40 sq. cm and over in section as in framed work complete all as specified and directed.

M&L for second class soft wood clean swan as in scantlings timber framed and fixed with nails complete all as specified and directed by Engr-in-Charge.

M&L for 7-9mm thick fine fissured teglar RH 99 traingular and acoustic purpose of size 600x600x7mm thick fixed with dash through fastner bolt of approved quality 04 Nos for per sqm including necessary cutting securing and making good complete all as specified and directed by Engr-in-Charge.

Demolition of un reinforced cement concret as in ground floor of any description and in any position not other wise specifically provided for and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m and change of direction complete all as specified and as directed by Engr-in-Charge.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) 100 mm thick as in subbases complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) 100 mm thick as in floor complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking tiles/paver block confirming to IS 15658-2006 of approved shape and size in M-40 grade and 80mm thick with grey cement and pigment laid and bedded on 25mm thick sand cushioning including filling of joints all as specified and directed by Engr-in-charge.

Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed by Engr-in-Charge.

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hook and washers as in roofs /walls etc. with grade of zine coating 275 complete all as specified and directed by Engr-in-Charge.

Ditto all as per item No 13 here-in- above but except sheeting complete all as specified and directed by Engr-in-Charge.

S&F 0.8mm thick Galvanised plain mild steel sheeting, fixed with J or L hook and washers as in roofs /walls etc. with grade of zine coating 275 complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.

M&L for vitrified tiles dark shade/double charged/ultracharged shade of 10 mm thick (square/rectangular) polished bright, area of tiles exceeding 0.36 sqm but not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in cement mortar 1.6 complete all as specified and directed by Engr-in-Charge. Make as per PS.

M & L for joint free Non-Skid coloured ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for two coats of synthetic enamel paint over an one coat of red oxide primer on new steel surfaces of any description over 10cm girth or width, not otherwise described including preparation of new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc complete all as specified and directed by Engr in charge.

M&L for plain sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane including hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engr in charge.

M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as specified and directed.

M&L for rendering 15mm thick rendering in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces, finished even and fair without using extra cement in complete all as specified and as directed.

M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat over a coat of chalk whiting complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or stone masonary work, finishing the surfaces with even and fair without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of distempering with oil bound distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, over a coat of primer complete all as specified and directed by Engr-in-charge.

S&F mild steel work, framed brackets of angles, or tees with web and flanges cut to shape drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 450mm x 350mm x 7mm thick/ 300x200x7mm thick, first quality, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) including 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and as directed.

S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including all fittings for fixing to walls complete all as specified and directed.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including all fittings for fixing to walls complete all as specified and directed.

S&F 25mm outer dia PPR Gate valve (Brass insert) conforming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F 15mm bore bib tap, (minmum weight 350 gms), chromium plated, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer-in-Charge. Make: Bib cock Cat part No - F1012151, Cera or equivalent make as specified in PS

S&F two way Angle cock , fancy type, chromium plated with long shank and cup (two way Angle valve type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed. Make : Two way angle cock Cat part No-F200211 GARNET QUARTER TURN FITTING 2 WAY ANGLE COCK , 'Cera' or equivalent model of make as specified in PS.

S&F grating doom 100mm dia of chromium plated (minimum weight 60gms), complete all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and diected by Engr-in-Charge.

S&F tubular towel rail,aluminium anodised, 20mm dia, D type, 600mm long between flanges including screws and cleats complete all as specified and diected by Engr-in-Charge.

S&F one piece EWC of ceramic (swirl flush) of size 710x390x790mm 'Snow white' with soft close seat cover & twin flush fittings including toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc complete all as specified and directed by Engineer-in-Charge. Make : Cat Part No. CRUISER S1013137 S TRAP 300 mm of 'Cera' or equivalent model of make specified in particular specifications.

Supply and fix semi-recessed cabinet wash hand basin, white, of size 500x420mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer with 450 mm braided connection (without pop-up) complete all as specified in particular specifications. Make : Cat Part No. COLGA S2030132, F1013452 SINGLE LEVER BASIN MIXER WITH 305MM (12") EXTENDED BODY AND 450MM BRAIDED CONNCETION PIPE (WITHOUT POP-UP), chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in particular specifications.

S&F Vitreous China Urinal full stall type white (excluding flushing cistern flush pipe and wast pipe) Vitreous China Urinals bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed.

S&F chromium plated brass soap dish holder (oval shape) fixed to walls (size not less than 125mm long) complete all as specified and directed.

S&F chromium plated brass paper holder with flap guard complete all as specified and directed.

S&F powder coated aluminium anodised window openable fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass/wire mesh fixed with rubber gasket. The aluminium member of shutter is 65x40mm along with aluminium hanlde & tower bolt etc complete all as specified and directed.

S&F powder coated aluminium anodized grills with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as specified and directed.

S&F Aluminium (powder coated) sliding glazed shutter/ for partition wall of suitable size with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and locking arrangement at both end all as specified and directed by Engineer-in-Charge. Notes : (i) Glass filling in panels to windows shall be measured and paid for separately under respective item of this schedule as supply only (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured under respective item of this schedule.

S&F 30mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed by Engr-in-charge.Make as per PS.

M&L PCC 1:3:6 type C1 (20mm graded aggregate) as in anchoring hold fast, bed plate etc all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by Engr-in-Charge.

S&F for Aluminium, anodised, barrel tower bolts, ISI Marked, of extruded section 200 mm long, complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium anodised alloy handles fabricated type of 150 mm complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long mild steel medium weight butt hinges cold rolled complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S & F 75MM PVC Nahani trap, setting and jointing with solvent cement and fixed in Cement concrete type B-1 (1:2:4) complete all as specified and directed

M&L for 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC /ASTRAL

S&F PVC (SWR) bend 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S & F of 110 mm bore PVC (SWR) junction single(Single 'T') equal or unequal complete all as specified and directed by Engr-in-Charge.

S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

Cutting holes in brick walls in cement mortar for inserting holdfasts & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 for depth of embedded portion of holdasts or lugs measured from the face of the jamb into the wall exc. one brick but not exc two bricks complete all as specified and directed.

M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting, etc and screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and as directed by Engr-in-Charge.

M&L for providing precast cement concrete type B1, 1:2:4 using 20mm graded aggregate as in manhole cover slabs and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork all as specified and directed. Note : S&F reinforcement shall be measured and paid separately.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engineer-in-charge.

S&F 1000 litres rotational moulded polyethylene water storage tank, inner and out white, triple layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.Make as per PS.

S&F Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

Excavation in post holes (or similar holes) in hard/dense soil ,each n exc 0.5 cum,getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering,and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in sub base, foundation filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.

S & F health faucet, (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.

M&L Machine cut pre polished Kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed bed or bedding layer in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing (granite finish) and exposed edges of kota stone shall be rounded complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class softwood plain fillets, square, rectangular or triangular in section of sectional area exceeding 13Sqcm and n.exc 25 Sqcm, clean sawn, secured with nails or brads including dismantling unframed timber scantling under 40 sqcm in section, in fillets, rails, posts, rafters, purlins etc at any position, complete all as specified and as directed.

M&L for 6mm thick, 5 no. of ply wood BWR,type BB as in ceiling / boarding , flat or sloping fixed with screws to timber frame work complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkatscomplete all as directed by Engr-in-charge.Make as per PS.

S&F aluminium door handles cast type of 150 mm complete all as specified and directed by Engr-in-Charge.

S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

M&L for preperation of old decorated concrete /plastered surface of wall and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge.

M&L for one coat of synthetic enamel paint on old steel surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed by Engr in charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.

M&L Rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to Fe-410-W (Gde- E-250) quality- B complete all as specified and as directed by Engr-in-Charge.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

All as per item No 88.00 here-in-above but 1.5 Sqmm for one 3 pin 6 amps switch socket combination including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 88.00 here-in-above but 1.5 Sqmm for one 3 pin 6 amps switch socket combination including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No. 88.00 here-in-above but using cable 2.5 Sqmm size with 2.50 Sqmm for earth continuity for one socket outlet 15 Amps 3/5 pin on independent board complete all as specified and directed by Engr-in-Charge

S&F modular switch piano one way single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-in Charge.

S&F switch piano one way single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-in Charge.

S&F socket outlet 2 in 1,3 pin 5 Amps piano flush tupe single pole ISI marked complete.

S&F switch socket combination 2 in 1,3 pin 5A on the independent bd complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 15 Amps on the independent board complete all as specified and directed by Engr-in-Charge.

S&F white cover plate with frame (inner plate) 3 module complete all as specified and directed by Engr-in-Charge.

S&F white cover plate with frame (inner plate) 6 module complete all as specified and directed by Engr-in-Charge.

S&F white cover plate with frame (inner plate) 8 module complete all as specified and directed by Engr-in-Charge.

S&F LED lighting 18 watt,4 feet long (complete set T-5) with decorative and caps, powder coated CRCA decorative for LED tube 1x18 W LED including LED retrofit, 4 feet long (white colour) tube of 18 watt having driver, connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.

S&F LED lighting 9 watt, 2 feet long (complete set T-5) with decorative and caps, powder coated CRCA decorative for LED tube 1x9W LED including LED retrofit, 2 feet long (white colour) tube of 09 watt having driver, connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.

S&F LED bulb, 9 watt, 230 volt, 50 Hz, AC complete all as specified and directed by Engr-in-Charge.

S&F LED bulb, 10 watt, 230 volt, 50 Hz, AC complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose 3 terminal, 3 phase/PVC/ polycarbonate isolated body surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge.

S&F lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.

Supply and fixing of exhaust fan, heavy duty steel body, AC single phase 230 volts of size 200 mm sweep with blades, frame and louvers including PCC and plywood packing work as per site requirement complete all as specified and as directed.

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 240 volt, 50 Hz and complete accessories concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make as per PS

Supply and fixing for MCB SP 5 to 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make: Make as per PS

Supply and fixing for MCB SPN 63 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and fixing for MCB SPN 40 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and laying 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire one twin core cable flat or circular 16 Sqmm stranded conductor complete all as specified and directed by Engineer-in-Charge.

Sub main wiring with two run of 2.5 Sqmm (2x 2.5Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 2.5 Sqmm (1x 2.5 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 2.5 Sqmm (2x 2.5 Sqmm), one run of 2.5 Sqmm (1x2.5 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

Sub main wiring with two run of 1.5 Sqmm (2x 1.5Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 1.5 Sqmm (1x 1.5 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 1.5 Sqmm (2x 1.5 Sqmm), one run of 1.5 Sqmm (1x1.5 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F of LED 36 watt recessed 2' x 2' luminaires (warm/white) to enhance the delight of occupants with comfortable experiance through its design and glare free soft illumination and connection of 3 core copper wire with all assessories complete. Make Bajaj product code 112801 luminaire type BZRSQL 36W GZi WH or equivalent in HPL/ Havells/ CG.

S&F LED lighting 20 watt,4 feet long (complete set T-5) with decorative and caps, powder coated CRCA decorative for LED tube 1x20 W LED including LED retrofit, 4 feet long (white colour) tube of 20 watt having driver, connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 240 volt, 50 Hz and complete accessories concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make as per PS

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc complete all as speciifed and directed by Engr-in-Charge

Supply and fixing in replacement of electrical bell (multi music type), AC, 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of electrical bell push flush type, 5 Amps complete all as specified and directed by Engineer-in-Charge.

S&F in replacement for switch socket combination, 5 pin, 5& 15 Amps, flush type, 230 volts complete all as specified and directed by Engr-in-Charge

S&F in replacement for socket outlet, 3/5 pin, 5/6 Amps, flush type, 230 volts complete all as specified and directed by Engr-in-Charge

S&F in replacement for switch socket combination, 3/5 pin, 5/6 Amps, flush type, 230 volts complete all as specified and directed by Engr-in-Charge

S&F in replacement for switch piano flush type, one way, single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement for ceiling rose 3 terminal, 3 phase/PVC/polycarbonate isolated body surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge.

S&F in replacement lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.

S&F in replacement LED bulb, 10 watt, 230 volt, 50 Hz, AC complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED 36 watt recessed 2' x 2' luminaires (warm/white) to enhance the delight of occupants with comfortable experiance through its design and glare free soft illumination and connection of 3 core copper wire with all assessories complete. Make Bajaj product code 111778 luminaire type BZRSQL 36W GZ WH or equivalent in Philips/ Wipro/ Crompton/Syska.

S&F in replacement LED lighting 20 watt,4 feet long (complete set T-5) with decorative and caps, powder coated CRCA decorative for LED tube 1x20 W LED including LED retrofit, 4 feet long (white colour) tube of 20 watt having driver, connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.

S&F in replacement decorative wall light fitting 7.5 W including LED lamp 7.5W, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 watt LED filament lamp E27 base complete with all accessories prewired and connecting electrically using flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S&F in replacement decorative fancy light/wall light fitting 9W including 9W lamp, wall bracket luminaire complete with all accessories prewired and connecting electrically using flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED mirror light fitting 9W including 9W lamp, 230 volts, decorative ultra slim linear LED lighting fixtures with extruded polycarbonate environmental friendly, energy efficient, ready to use pack complete with all accessories prewired and connecting electrically using flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S&F in replacement 1' x 1' recessed mounting low depth white LED luminaires 18 W with 18 W lamps white powder coated CRCA sheet housing LEDs front frame with translucent cover fixed to the housing fixed in front frame 18W LED extruded aluminium heat sink projected in false ceiling. Make Bajaj product code 111912 luminaire type BZSSQL 36W GZ WH or equivalent in Philips/ Wipro/ Crompton/Syska.

Supply and fixing in replacement MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 240 volt, 50 Hz and complete accessories concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make as per PS

Supply and fixing in replacement MCB SP 5 to 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make: Make as per PS

Supply and fixing in replacement MCB SPN 40 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Sub main wiring with two run of 10 Sqmm (2x 10 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 10 Sqmm (2x 10 Sqmm), one run of 6 Sqmm (1x 6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F in replacement for switch socket combination, 2 in 1, 3/pin, 15 Amps, flush type, 230 volts complete all as specified and directed by Engr-in-Charge

S&F in replacement 18W LED 6000K with 18W LED Lamp decorative ultra slim round profile LED lighting fixtures with extruded polycarbonate environmental friendly, energy efficient, ready to use pack complete with all accessories prewired and connecting electrically to ceiling rose using flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing of exhaust fan, heavy duty steel body, AC single phase 230 volts of size 300 mm sweep with blades, frame and louvers including PCC and plywood packing work as per site requirement complete all as specified and as directed.

Rampal Singh Contractor