Certain building work in lower area units at Nimu under AGE (I) Nimu

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275.

S&F 0.80mm thick Plain, Galvanised, mild steel sheeting in ridges, hips, valley gutters straight flashings and etc (length and girth as fixed) complete and all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No 04 here-in-before but plain steel sheet.

S & F fibre glass reinforced translucent corruggated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A'.

M&L applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4.

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4.

S&F glazed coloured ceramic tiles 300x200x 6 to 7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified.

M&L for Vitrified ceramic (Light Shade) tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick sreed bedding layer in CM 1:4.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness un-reinforced (below or above ground level).

M&L for 75mm thick Cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub-base in floor finishes.

M&L 75mm thickness PCC M-10 type C-2 as in plinth protection and paving, complete all as specified.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in Ceilling.

M & L 6mm thick Plywood, 5 no of ply, grade BWR, type BB, fixed with nails to timber frame work as in ceilling complete.

M&L applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.

M & L Plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.

All as per item No 24 here in before but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by Engr In Charge.

Taking down cement or cement lime plaster any description incl raking out joints, hacking.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement.

M&L preparing new plastered surfaces of walls and applying three coats of white wash on walls.

M&L for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement.

M&L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer.

Demolition and breaking up drain pipes (salt glazed ware , AC, PVC or reinforced concrete) set in cement mortar of internal dia 75-100mm incl any earth work and demolition of PCC, complete all as specified.

M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe.

M&L PVC (SWR) bends any radius of 110mm bore.

M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 75mm bore pipe.

M&L PVC (SWR) bends any radius of 75mm bore.

Dismantling water tanks upto 500 litres capacity.

Dismantling water tanks Exc 500 & n.exc 1000 litres capacity.

S&F 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified.

All as per item No 40 here but capactity of 1000 ltrs.

S & F 20mm dia nipple suitable for water tank.

Taking up/down 15mm bore old tubing on walls and connection of size 15mm bore complete all as specified and as directed.

All as per item No 43 here but 20mm bore.

M &L 15mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

All as per item No 45 here but 20mm bore.

S & F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair.

S &F in repair 15mm dia Pillar taps cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type.

Supply only 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm.

M & L for PVC connection of 300mm long.

S&F in repair 20mm dia CP single towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified.

S & F in repair 15mm bore Bib taps, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type.

S&F in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S & F in repair PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets.

S&F in repair Vitreous china wash down water closet pan "Pedestal Pattern" white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as specified & directed.

S&F in repair sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

S&F in repair washdown water closet orissa pattern size 580 x 440 mm white with integral foot rest and trap, including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket of wepan.

S&F in repair vitreous china wash basin white flat back size 550x400mm (including tap, waste chain and plug and porcelain stopper and brackets all complete.

supply only pedestal for WHB.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe.

S & F in repair brass Chromium plated wash hand basin mixer tap 15mm bore. Make: Cera, Jaquar, Marc & Hindware as per Sample and directed by Engr -in Charge.

S&F in repair 15mm bore CP angular stop cook long thread screwed both ends for iron pipe or for unions and fixed complete all as specified. Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge.

S&F in repairs CP wall mixer 3-in-1 system with provision for both telephone shower & overhead shower complete with 115mm long bend pipe, complete all as specified & dirercted Make: Cera, Jaquar, Marc & Hindware as per Sample and directed by Engr -in Charge.

S & F in repair CP toilet paper holder. Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge.

S&F Steel Dropery rod 25mm dia PVC colour coated of desired colour with pair of PVC Funnel and 2x Boacket for length n exc 2.0 m Max length each.

S&F in repairs hand shower (health faucet ) with 15mm dia and 1.5 meter long CP flexible tube and wall hook complete all as specified Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge.

S & F for vetreous China wawash down water closet "Padestal pattern' single piece white with moulded cistern complete set with saat cover and fixing arrangement with fixing bolt etc including making good the disturbed portion of floor in cement 1:2:4 B-O as in repair complete all specified and directed by EIC Make :- cera. jaquar and hindware or equalant

Dismantling stone slabs and tiles of any description or thickness in floors approns etc, laid bedded and pointed in any mortar.

M&L Granite (of Any Type) Tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing type, all as specified and as directed by Engr-in-charge.

CHHIRPON BUILDERS