GE/DE-33/2020-2021

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc, complete all as specified and as directed.

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc.) or insulation boards, slabs, blankets any thickness including cover fillets, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth : for foundation, etc or for shafts wells, cesspits, manholes etc., not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3.0mtr in depth for foundation, etc or for shafts wells, cesspits, manholes etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25cm thick on soft/loose soil, complete all as specified and as directed.

Removing excavated material not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting points in soils, complete all as specified and as directed.

Plain cement concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 as in benching, coping and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in slabs, floor slabs, landings, shelves and the like, supported on walls, beams, columns, etc., complete all as specified and as directed.

Plain cement concrete 1:3:6, Type C-2 using 40mm graded crushed stone aggregate, as in surface channels and drains, complete all as specified and as directed.

Plain cement concrete 1:2:4, Type B-2 using 40mm graded crushed stone aggregate, as in surface channels and drains, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 using old size bricks, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:4 using old size bricks, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan built to any radius in cement mortar 1:4 using old size bricks in half brick walls, complete all as specified and as directed.

Brick tile work with sub class “B” bricks tiles 40mm thick laid on mud mortar and joints grouted flush and pointed in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and as directed.

18-20mm thick Granite stone slab (table rubbed and polished) in steps, shelves, and the like not less than 1Sqm (in one piece), laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, complete all as specified and as directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, shelves etc., not exceeding 200mm thickness for fair finished concrete surfaces, complete all as specified and as directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and as directed.

Mild steel flat iron work as in wind ties for roofs, including securing bolts and all necessary drilling, bolting or cutting, bending, etc, complete all as specified and as directed.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165), complete all as specified and as directed.

10mm dia and above TMT bars cut to length, bend to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Taking down existing roof treatment any type including screed bed, if any and hacking for key, scrubbing down wih water including cleaning and clearing roof of all the rubbish. Rendering on top of concrete roofs with 15mm thick cement mortar in 1:4. Cleaning the plastered surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped. Apply evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Kg/Sqm. Over the primed surface apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Privide APP modified Polymeric five layered membrane with central core 100 micron high molecular high density polyethylene film. Minimum weight of membrane will be 3.6 Kg/Sqm. APP membrane will be laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. Over the APP membrane apply semi hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm and blinded with fine sand in dry condition @ 0.50Kg/Sqm dusted over the bitumen coat. Provide final layer of two coats of aluminium paint over a coat of primer as per manufacturer's instructions, complete all as specified and as directed.

Aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long, complete all as specified and as directed.

Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping, complete all as specified and as directed.

25 mm thick cement concrete 1:2:4 type B-0 (using 12.50mm grade crushed stone aggregate) finished even and fair as in sub base, complete all as specified and as directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20mm grade crushed stone aggregate) finished even and fair as in roof padding, complete all as specified and as directed.

Machine cut kota stone slab 20 to 25 mm thick as in flooring laid over and including cement screed base 15mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed

Machine cut kota stone slab 20 to 25 mm thick as in vertical surfaces of skirtings, dado etc., thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4 including taking down old tiles and backing layer, complete all as specified and as directed.

100 mm thick cement concrete 1:4:8 type D-2 (using 40mm grade crushed stone aggregate) finished even and fair as in sub base, complete all as specified and as directed.

75 mm thick cement concrete 1:4:8 type D-2 (using 40mm grade crushed stone aggregate) finished even and fair as in sub base, complete all as specified and as directed.

75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection including finishing the surface even and fair, complete all as specified and as directed.

Joint less Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 450mm x 300mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 300mm x 200mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:6 on fair faces of bricks or concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:4 on fair faces of bricks or concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:4 on other than fair faces of brick work including finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick on fair faces of concrete surfaces as in ceilings in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only liquid water proofing compound, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coat of cement based paint over a coat of primer, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of walls and applying three coats of white wash, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of ceilings and applying three coats of white wash, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description not exceeding 10 cm width or girth over a coat of red oxide complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide complete all as specified and as directed.

Cutting chases for concealed water tubing girth exceeding 10cm but not exceeding 20cm girth and making good in cement mortar 1:3 in brick walls, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

Angle valve of brass fancy type, chromium plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

Grating doom 125 mm dia with or without waste hole of PTMT. (Minimum weight 40 gms), fixed in repairs, complete all as specified and as directed.

Tubular towel rail 'D' type 20mm dia, chromium plated brass 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, Cat Part No. ACN7711NM of Jaquar or equivalent in Hindware/Cera/Marc complete all as specified and as directed.

Vitreous chinaware table top wash hand basin (WHB) of size 560mm x 450mm x 175mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., fixed in repairs, complete all as specified and as directed, (Make : Jaquar Cat Part No : KUS-WHT-35901 or equivalent in Hindware/Cera/Somany).

PVC 110mm bore (SWR) pipes double socketed, in any length with rubber ring joints, flaid in trenches or in floors, complete all as specified and as directed.

Vitreous china wash down closet pan (pedestal pattern), white with "S" trap, including plastic seat and cover and connecting to outgoing pipe, flush pipe and anti syphonage pipe, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down closet pan (pedestal pattern), white with "S" trap, including plastic seat and cover and connecting to outgoing pipe, flush pipe and anti syphonage pipe, fixed in repairs, complete all as specified and as directed.

CP bottle trap with connection fixed to wall with CP screws & connection to tap, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Pt No-ALD-769L or equivalent in Hindware/Cera/Somany).

CP brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-FUS-29267 or equivalent in Hindware/Cera/Somany).

CP toilet paper holder with stainless steel fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-APN-35751P or equivalent in Hindware/Cera/Somany).

CP health faucet with connection fixed to wall with CP screws & connection to tap, fixed in repairs, complete all as specified and as directed, (Make : Jaquar Cat Part No-ALD-CHR 593N or equivalent in Hindware/Cera/Somany).

CI floor trap, with grating including jointing to 75mm bore waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and as directed.

15mm bore bib tap chromium plated brass, Fancy type, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

Sheet Glass shelf fancy type, having 5mm thick sheet glass shelf 12cm wide with aluminium alloy guard railing 60cm long with aluminium brackets, fixed in repairs, complete all as specified and as directed.

Soap dish chromium plated brass fixed in position with PVC plugs and chromium plated brass screws, fixed in repairs, Cat Part No. ACN1131N of Jaquar or equivalent in Hindware/Cera/Marc complete all as specified and as directed.

Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position including 20mm dia float valve and dismantling of existing tank, complete all as specified and as directed.

20 mm bore,PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe (min weight 210gms) , complete all as specified and as directed.

Vitreous china wash hand basin, white flat back size 550mm x 400mm including waste pipe, brackets and 32mm dia bore CP coupling, complete all as specified and as directed.

CP brass WHB Mixer Single Lever Extended Basin Mixer (Height-85mm) with Popup Waste System with 450mm Long Braided Hoses fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-FUS-29052B or equivalent in Hindware/Cera/Somany).

15mm bore fancy type Pillar Tap, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed.

Stop valve cast copper alloy, screwed down high pressure with capstan head for iron pipe 15mm bore, complete all as specified and as directed.

PVC connection 15 mm size with CP Brass nuts 450mm long, complete all as specified and as directed.

PVC connection 15 mm size with CP Brass nuts 300mm long, complete all as specified and as directed.

PVC valve less syphonic action type coloured flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections, complete all as specified and as directed.

Vitreous china squatting pan ‘Orissa’ pattern size 580 x 440 mm white with integral foot rests including P or S trap including provn of lime concrete bedding including connections to flushing cistern/pipe, complete all as specified and as directed.

Sink with draining board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 1145mm x 510mm x 200mm bowl size 510mm x 400mm x 200mm with all fitting and fixture, fixed in repairs, complete all as specified and as directed.

CP brass shower rose fancy type 150mm x 150mm size with swivel joint fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make : Somany Cat Part No-240406, Cera Cat Part No. F7010506, Hindware Cat Part No. 240806 or equivalent in Jaquar.

Gun metal globe or gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe 15mm bore, complete all as specified and as directed.

Cutting into existing manholes including cuttng out existing benching for connecting new drains and forming branch channel (1/2 or 3/4 section), making good to pipe in cement concrete 1:2:4 type B-1 and finished smooth and reforming benching as required for 150mm dia pipe, complete all as specified and as directed.

Cutting into existing manholes including cuttng out existing benching for connecting new drains and forming branch channel (1/2 or 3/4 section), making good to pipe in cement concrete 1:2:4 type B-1 and finished smooth and reforming benching as required for 250mm dia pipe, complete all as specified and as directed.

Cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate) in bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate) in bed to drain pipe 250 mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and directed.

DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

Reinforced concrete pipes NP-2, nominal size 150 mm (internal dia), laid in trenches and fixed with cement joints, complete all as specified and directed.

Precast SFRC man hole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.

PFRC (plastic fibre reinforced concrete) drain medium duty cover of clear cover size exc. 0.35 sqm but n.exc. 1.5 sqm, 75mm thick provided with provision of two lifting hooks at appropriate locations, factory made, complete all as specified and as directed. Make : Polycrete or equivalent in Binayak Hi Tech Engg Pvt Ltd/Everlast Composites/Tribeni Fibre Pvt Ltd.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-14,15 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

sunil traders

Simran construction Company

M/s Durga Traders