CA No. CWE(S)/NORTH/TOKEN/18 OF 2023-2024

Amount

Scarifying or picking gravelled, macadam or bituminous macadam including soling surfaces if required in area not exceeding 400 Sqm and depth exceeding 50mm and not exceeding 100mm deep and removing materials from site of work or stacking for reuse at site complete all as specified and directed.

Material & labour for Screening road metal, chippings etc on the site of work, when specially ordered including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both side of screen measured for payment) complete all as specified and directed.

M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with granite, trap or basalt stone complete.

Ditto all as per item No 3 above but except materials ( Material retrieved from item No 1 to be reused after screening)

Repairs to pot holes of any depth and n exc 1 Sqm each incl sweeping free from dust and mud, water scoring sunken surfaces in roads, paths etc cutting around edges at least 25mm in depth, making good by applying tack coat Vg-30 @ 5 kg per 10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (inc supply of premixed macadam, binder and chipping). depth of potholes exc 30mm.

M&L Premix bituminous, paving bitumen VG-30 grade any penetration laid/rolled macadam with binder content of 4% by weight of total mix and compacted to required gradient and camber (consolidated thickness 75mm or less)

Preparing unsurfaced water bound mecadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a tack coat of paving bitumen Vg-30 primer at 10 Kgs/10 sqm all as specified and directed

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a tack coat of paving bitumen Vg-30 primer at 5 Kgs/10 sqm all as specified and directed

Bituminous premixed semi dense asphaltic concrete, 30mm consolidated thicknes with 5.5% binder content(paving bitumen VG-30) by weight of total mix, mixed in hot mixed plant, rolled and compacted to required camber and gradient by using mechanical paver complete to be uniform surface all as specified and directed.

M&L 100mm thick(Spreaded thickness) approved moorum/red bajri for berms including spreading,levelling,watering and rolled with hand roller of 0.2 to 0.5 tonne capacity to required camber and gradient complete all as directed . Note : Moorum shall be brought from out side MD land.

M & L for painting lines, dashes, arrows, letters etc on road surfaces / over speed breakers exc 10 cm wide, with thermoplastic road marking paint, spray machine, preparing black top surface including fanning out dust and any other foreign matter complete all as specified and directed.

S&F in repairs ABS round body fitted with 2 Nos of 110mm dia highly reflective reflector made out of PMMA and having a pipe, (duly powder coated) . Sponser plate can be provided for sponsership. Two small rectangular reflector of size 70x23mm, 2 Nos each side are also provided for better reflecting including necessary excavation of size (300x300x450mm) and fixed with PCC (1:3:6) all as directed by GE.

S&F in repairs delinators dual directions retro reflective round made of 16 gauge MS pipe 75mm dia and 0.9 mtrs height duly powder coated painted with three reflective band of coloured (red white and yellow 150mm wide & 50 micron thick) and protected with welded wire mesh cage including necessary excavation of size (300x300x450mm) and fixed with PCC type C1 (1:3:6) all as directed by GE.

S&F solar road pavement markers ( solar stud) AK 970 of Aktion make or an equivalent in 3M / Mr. Illumination fixed on bituminous/ concrete surfaces as per manufacturer instructions complete as directed.

S & F road cat eyes of approved make pasted with the adhesive as per manufacturer instructions. Make: 3 M of series 290 C or equivalent in Mr. Illumination/ Dark eye / Aktion as approved by GE.

M&L for rubber based speed bumps of dimensions 500x420x75mm with reflective arrow stickers on both side with combination of approved colours ( black and yellow) fixed with necessary bolts etc., complete all as specified and as directed

S & F in repairs Convex Mirrior of 1000 mm Dia made of poly carbonate material fix to 100 mm dia MS Post 50mm nominal bore and of wall thickness 3.65mm conforming to IS-1161-1979 of grade St-240 of 3.0 metre long including two coats of epoxy paint, necessary earth work and excavation in post holes and PCC bed block 1:2:4 type B1 of size 450 X 450 x 600 mm,including removal of surplus soil and levelling of disturbed ground complete all specified and directed

Preparation of old surfaces and applying two coats of Synthetic enamel paint any description over 10cm girth or width not otherwise described, complete all as specified.

Preparation of old concrete/bituminous surfaces and applying two coats of radium paint of colour as approved by GE of any description over 10cm girth or width not otherwise described, complete all as specified.

BEKKAM CONSTRUCTIONS

SAI RUPA CONSTRUCTIONS

M/S B.SHRAVAN KUMAR

K CHANDRAPAL REDDY