Construction of Parking Shed for Vehicle of Officers Working Station for Staff and allied works in CAPD

Amount

Dismantling roofing of CGI sheet including ridges hips valleys and gutters etc. and stacking with in 50 m lead.

Dismantling steelwork in builtup sections in angles tees flats and channels including all gusset plates bolts nuts cutting rivets welding etc.aqnd stacking within 50 m lead

Dismantling doors windows and clerestorey windows shutters including cowkhats holdfasts etc. complete and stacking within 50 m lead

Dismantling of flushing cistern of all types including oan and stacking of useful material near the site and disposal of unserviceable materials within 50 m lead.

Demolishing brickwork manually including stacking of serviceable material and disposal of unserviceable material within 50 m lead in cement mortar.

Removing mortar from bricks and cleaning bricksincluding stacking within lead of 50m .Stacks of cleaned bricks shall be measured

Eartwork in excavation by manual means in trenches for foundations including disposal of excavated earth upto 1 m from cutting edge .

Providing and laying in position cement concrete of specified grade M5.0including curing but excluding formwork costs

Providing and laying in position reinforcd cement concrete of specified grade M 20 including curing but excluding formwork costs

Centering and shuttering including strutting ,propping etc. and removal of same for foundations.

Structural steelwork welded in builtup sections ,trussesand framed including cutting ,hoisting,fixing in position and applying a priming coat of approved steel prmer.

Fillling available excavated earth in trenches ,sides of foundations etc in layers not exceeding in 20 cm layers in depth,consolidating each deposited layer byb ramming and watering lead upto 50 m and lift 1.5 m.

Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'l' hooks, bolts and nuts 8mm dia. G.l plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2mm thick flat

Providing and fixing of UPVC rain water pipes conforming to IS;13592 including jointing with seal ring conforming to IS;5382 leaving 10 mm gap for thermal expansion 110mm dia single socketed pipes

110 mm dia bend

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarseDark shade using ordinary cement.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade

Providing of fixing working stations by way of wooden partitions consisting of wooden frame of first class kail wood of size 65 mm*65mm fixed in position with hold fasts ,lugs or dash fasteners both sides covered with 6 mm thick waqterproof plywood of is grade 710 BWPof superior and approved make like century, green,sainik or equivalent including finishing with imm thick laminated glossy or matt finshed sunmica sheets of superior and approved make like merino,century,green or equivalent make including fixing of 5mm thick plain /pinhead glass on top of partions of av. height of 450mm (Saint gobain/gold plus or equivalent)make with wooden beadings including all carriages and taxes complete,

Providing and fixing of 25 mm dia chromium plated stainless steel drapery/ curtain rods (304 grade) of superior and approved make as per direction of Engineer-in -incharge including all carriages and taxes complete seamless finish.

stainless steel holding down brackets with necessary screws and plugs complete

stainless steel finials/end caps with necessary screws complete

Providing and fixing of curtains with fabric of curtain cloth of 100% polyster filament,usable fabric width 140cms/54" martinale not less than 12000 rubs ,weight not less than 300 gsm,density of fabric is of non transparent composition of soft and smooth texture,durable and goodv dropability, colours and prints as approved by Engineer -in-charge and of approved brand lke kc fabrics ,d'dcor or similar.the stiching of the curtains shall be modern, functional with eyelet platter etc.for easy sliding and maintenance.The curtains will be stiched as per site requirement with necessary modifications in stiching as per site/size requirement. For fabricating tapery heading permanent finish buckram shall be double folded into the heading (3" thickness of fabric)and sewn with triple strand thread,colour mtched to fabric used,equidistant circles should be cut into the top of draped fabric and then the circular metal islets should be secured within each other so that a curtain rod can slide through with ease.Lower end to be stiched after double turn to improve the fall of curtain (net150mm to 200mm).Upper side will have nefa with round cuts with buckrum lining 150-200mm.Bottom hems/edge and side hems are to be blind stiched so that stichesw are not visible on face of fabric. Measurements shall be made end to end finished length of the curtains.

Providing and fixing of roller blinds with powder coated decorative cassesste of make Marvel/Hunterdoglos in white colour made of extracting non-rusting aluminium with a pocket to insert the fabric inside of it with end plugs and operating mechanism made up of ABS plastic with ball chain of 1.00 mm thick for lowering or raising the blind and can be positioned n right /left part of thje blind.The ball chain shallbe minimum1.5mm dia cord with 4.5 mm dia acetal balls moulded co-axially to it on 6 mm pitch to form an endless ball chain.The brackets should be zinc plated /powder coated mild steel,bottom rail 1.5 mm thick of non-rusting aluminium alloy in round/pentagon shape with powder coatingb ofb matching shade/colour nearest to the colour of fabrics as per approved manufacturers standard.The fabric has to be transluscent/blackout (as approved by Engineer-in-charge)100% polyster,weight 270 gms/sqm and 335 gms/sqm with excellenthanging and tearing strength of approved colour complete as per directions of Engineer-in -incharge.

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic meterial by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications

P/F of S.S Letters including Fixing on bord complete job as per direction of Engineer-in-Charge.

Disposal of building rubbish /mulba by M.T outside municipal limits

Cariges of materials by M.T

stone aggregate

Measurable quantities may vary at the time of actual execution of the work and shall be allowed as per actual with in the cost.

RAVI CHANDER GUPTA

M/s Satish Ganjoo

Chander Gupta