S/R to Repair to Hl Bridge over river Rushikulya connecting NH-217 to Jhagadei-Jahada road under Special Repair of Bridges and Approaches for the year 2025-26.

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 kms spreading, grading to required slope and compacting to meet requirement.

Providing , laying, spreading and compacting stone aggregates using IRC GR-II size granite metal to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonne in stages to proper grade and camber, applying and brooming requsite type of screening / blinding materials as crusher dust to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface of granular base including clearing of road surface and spraying primer at the rate of 06 Kg/sqm using mechanical clause 502 of MOSRT & H specifications for raod

Providing and applying tack coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface of granular base including clearing of road surface and spraying primer at the rate of 0.6 Kg/sqm using mechanical clause 502 of MOSRT & H specifications for raod Over Granular base (3 Kg/10 Sqmt)

Over BT Surface (2 Kg/10 Sqmt)

20mm thick premix carpet using 0.27cum of 13.2mm 5.6mm size broken chips and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR inclusive of hire and running charges of PRR , hot mix plant, bitumen boilers and all other T & P articles including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in-charge.

6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm. including hire and running charges of PRR, Hot mix plant, tar boilerand all other T&P articals etc including cost and conveyance of chips and bitumen etc. complete as per direction of the Engineer-in-charge.

Providing strip seal expansion joint as per MORT &H specification etc. complete as per direction of the Engineer-in-charge.

RCC work of M 30 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying etc. complete as per direction of the Engineer-in-charge.

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification etc. complete as per direction of the Engineer-in-charge.