SPECIAL REPAIR TO FAFA ACCN (OFFRS ACCN) P-29 (04 ACCN) IN SANCHI ENCLAVE AT BAIRAGARH, BHOPAL

Amount

Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each complete all as specified and directed

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply and fix factory made Window ECO 4000, supply and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge. Make: NCL Alltek & Seccolor Ltd, Ashwani & Sons or equivalent as approved by the GE.

S&F door stopper of aluminium alloy body anodised, complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.

S&F 105mmX60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 125mmX60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

M&L for cement concrete (1:2:4) Type B-0 (using 12.5mm graded crushed stone aggregate) as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panel will be of wire gauze in lieu of wood grain PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M S Solid tube and this tube will be welded to MS tubes. The wire gauge shall be stretched to tighten firmly and all as per specification complete all as specified and directed.

M&L for 35 mm thick IInd class HW rail & style factory made plain framed panelled door shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, kiln seasoned and chemically pressure treated complete all as specified and directed.

Refixing in same or other opening shutters exc 1.0 sqm and n.exc 2 Sqm complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

S&F in repairs 25mm dia drapery rod, mild steel, chromium plated 1mm thick of standard quality with fixing brackets, stops rollers fancy type etc complete all as specified and directed..

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and directed

S&F 100 mm mild steel butt hinges medium weight,cold rolled complete all as specified and directed

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick(below or above GL) incl tiling if any complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) in plinth protection,aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (Using 20 mm graded crushed stone aggregate) for sub base of floor, complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite (any type) 20 mm thick machine cut including 15mm thick screed bed in CM (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inlcluding grinding and polishing types complete all as specified and directed.

M&L for joint free coloured designer flooring tiles 10mm thick (square/rectangular) polished, heavy duty, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 15 mm thick rendering in CM (1:4) complete all as specified and directed. Make: Somany (Durastone)/ Johnson (Endura)/ Kajaria

M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450X350X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. Make: Somany (Durastone)/ Johnson (Endura)/ Kajaria

M&L for vitrified ceramics tiles 10mm thick (square/ rectangular ) polished, area of each tiles n. exc 0.36 Sqm(600mmX600mm) , in floors over and including 15mm thick screed in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Make: Somany (Durastone)/ Johnson (Endura)/ Kajaria

M&L for Vitrified Ceramic tiles 10 mm thick (Light shade) (square/ rectangular) polished, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:6) for backing of tiles on vertical surfaces complete all as specified and as directed. Make: Somany (Durastone)/ Johnson (Endura)/ Kajaria

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed Make: Somany (Durastone)/ Johnson (Endura)/ Kajaria

Taking down cement plaster on brick or concrete surfaces , including raking out joints , hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan any radius in half brick thick walls, built in CM (1:4) all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on brick/ concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed

M&L for 15mm thick rendering in CM (1:4) on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) including complete removal of entire existing treatment and washing complete all as specified and directed by Engr-In-Charge

M&L for 10mm thick rendering in cement mortar (1:3) on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, beams,chajjas and similar work not exceeding 200 mm thick (Horizontal/Sloping) receive for fair finished surfaces complete all as specified and directed.

M&L for Mild steel TMT Bar 6 to 8mmm dia cut to length, bent to shape to required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild seel wire ( anneled ) not less than 0.9mm dia or securing with clips quality confirming all as specifed and directed.

M&L for reinforced cement concrete (nominal mix) (using 20mm graded crushed stone aggregate) Type B1 (1:2:4) on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm, complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed.

S&F in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, oval type, size 520 x 450mm including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. Make:- SOMANY (Cat No.110501) or equivalent make in HINDWARE/ CERA/ PARRYWARE as approved by GE.

S&F in repairs 15 mm pillar cock swan neck, single lever, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 20 mm GI tubing and connection in new or old position(walls, ceiling and floors etc) including all fittings all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 15mm GI tubing and connection in new or old position(walls, ceiling and floors etc) including all fittings all as specified and directed.

S&F in repairs 32mm bore PVC waste pipe for WHB/ kitchen sink complete all as specified and directed.

S&F in repairs vitreous china wash down water closed pan(pedestal Pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.

Taking down existing old roof treatment of any description , any type including removal old Tar felt, screed bed and plastering etc complete all as specified and directed.

M&L for provn of water proofing roof treatment to accessible/Non accessible RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/Sqm of thickness not less than 3 mm having thermal; insulation with plain finish on upper side of membrane uniformely embedded during manufacturing process incl two coats of silver paint over the top surface of the membrance. All as per following specifications:-

10 mm thick plaster in CM (1:4) mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab. After the plaster is cured the roof will be tested for water tightening by ponding with water for seven days for any seepage/ leakages etc. if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repired the slab will be tested for watertightness aginst before processing further treatments.

The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners.

Bituminous primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm to be applied an prepared surface till the surface is properly impregnated.

APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.

All joints & changes in direction should be curved with cement morar (1:3) mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.

A fillet of PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) of 100 mm wide and 100 mm height in rounded / triangular shape shall be provided at all junctions of vertical and horizontal surfaces and whereever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.

S&F in repairs 25mm dia curtain rails, mild steel, chromium plated with fixing brackets, stops rollers etc complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed. Note: Weight shall be verified by the GE.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two coats of white wash complete all as specified and as directed.

Ditto all as per Item No.73 above but on ceiling, complete all as specified and as directed.

M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item.

M&L for complete removal of existing treatment from walls and applying two coats of weather proof water base emulsion paint with modified acrylic, exterior wall finished with silicon adhesive complete all as specified and as directed.

M&L for applying one coat of white wall care putty on walls complete all as specified and directed.

M&L for preparation of old or previously treated surfaces wood/wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

M&L for cleaning thoroughly complete existing surface from walls & roofs and applying two coats of acrylic polymer modified cementitions based protective and water proofing coating as per manufacture instruction and directed by Engr-in-Charge.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of weather proof water base emulsion paint with modified acrylic, exterior wall finished with silicon adhesive on walls complete all as specified and as directed.

S&F in repair 100mm dia CP grating complete all as specified and directed.

M&L for precast cement concrete (1:2:4) Type B1 (Using 20mm graded crushed stone aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:6 complete all as specified and directed.

Returning filling in with excavated soil of any type including spreading, leveling, watering and well ramming in layers n exc 25 cm thick.

Removing excavated material exc 250 m and not exc 500 mtr and depositing where directed complete all as specified and directed by Engr-In-Charge.

Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate), concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm dia all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

S&F IInd class hard wood plain, solid, straight chowkhats and frames, wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.

M&L in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/ nails to timber frame work including taking down old board complete all as specified and directed.

S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for 6mm thick lipping for external teak wood or veneered particle board or block board fixed with nails complete all as specified and directed.

S&F100mm hasp and staple, safety type, anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed

S&F 75 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed

S&F in repairs 15 mm bore twin angle valve (single lever) , cast copper alloy, chromium plated with screwed down , high pressure with crutch butterfly handle, screwed for iron pipe or union and fixed complete all as specified and directed.

S&F in repairs hand shower (health faucet) with 8mm dia 1.0 mter long flexible tube and wall hook complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size 30cm, chromium plated bracket guard and railing complete all as specified and as directed.

S&F in repair CP soap dish of standard quality complete all as specified and as directed.

S&F Bathroom cabinet of hard thermosetting plastic of size 622 x 422 mm, fitted with superior quality distortion free 4 mm thick mirror complete all as specified and directed. Make: PRAYAG (Model No. 555) or equivalent in NEELKAMAL /PARRYWARE.

S&F self closing hinges for kitchen cabinet, stainless steel, any type complete all as specified and as directed.

S&F stainless steel plate/cup saucer tray unit, sliding channel for tray, etc, for use in modular kitchen any size and shape as per sample and as approved complete all as specified and as directed.

S&F PVC moulded kitchen cabinet shutters, sides, partitions,shape and size as per sample ans as approved complete all as specified and as directed.

S&F magnetic catcher fixed in cabinets complete all as specified and directed

S&F in repairs wash basin mixture, centre hole, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated screwed for iron pipe or for unions 15mm bore, complete all as specified and directed.

S&F in repairs wall mixture telephonic with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack, made up of 0.63 mm thick stainless steel sheet, overall minimum size: 31" x 24" x 10" fixed to walls with chromium plated brass screws complete all as specified and directed.

M&L for cement concrete type B-1, (1:2:4) (Using 20mm graded crushed stone aggregate) as in Foundations , sub base and mass concrete complete all as specified and directed by Engr-In-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring for one light point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit ISI marked of size 20mm dia, with all accessories(concealing to be done in any type of wall only)(PVC Casing and caping to be done wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly,including provision of appropriate size of modular metal flush boxes concealed with modular natural/white finish front plate with base plate for the mounting of modular switches, sockets & fan regulators etc. complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before, but for Fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before, but for bell buzzer point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before but for one light point controlled by two 2 way switches, with FRLS cables of 1.5 sqmm complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

Ditto all as per item No. 120.00 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

Ditto all as per item No. 120.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F modular switch one way 6 Amp one module, 240 volts.

S&F ceiling rose, surface type, 3 terminal, 240 V.

S&F lamp holder (Angle holder) PVC/ polycarbonate type cased body with back plate suitable for pendent fittings including LED bulb of 9 Watt.

S&F stepped type modular fan regulator 120W.

S&F modular socket outlet 2-in-1, 5pin, 6 Amps, 240 volts, controlled by one switch.

S&F modular socket outlet multipurpose 5 pin 6/16 amp and one pin, 6 amp controlled by one switch.

S&F modular switch one way 16 Amp one module, 240 volts.

S&F electric door bell, Ding Dong AC. 230 volts, single pole.

S&F Modular Bell push, flush type, SP, 5 amp, 240V.

S&F modular switch two way 6 Amp one module, 240 volts.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of capacity 20 amps, complete all as specified and as directed.

Taking down old unserviceable sub main wiring of any size and any description all as directed by Engr-In-Charge.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 10 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit oe size 25 mm dia ISI marked including PVC insulated unsheathed 10 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as directed.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

S&F LED 20/21Watt tube light fitting (T8 type) , including LED retrofit tube 20/21 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make:- C&S cat Part No. LTDC01220WLED/WD (LED battan T8 TARA -M) or equivalent in Philips/ Crompton/Bajaj/Wipro and Havells (Titania LED tube with Regal batten LED) as approved by GE.

Taking down existing u/s fitting and S&F LED 9/10Watt tube light fitting, surface mounting fitting for mirror light with slik and light weight batton, 240 Volt, with PF >0.95, efficacy >95 , colour temp 6500K complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make:- Havells cat Part No. LHEXBQP7PN1W009 or equivalent in Philips/ Crompton/Bajaj/Wipro and C&S as approved by GE.

Supply and fixing energy saving and environment friendly LED Security light fitting of 25 watt with high power LED's with lens and IP66 protection and luminaire housing is of pressure die-cast alluminium alloy for heat sink for better heat transmission with polycarbonate cover and fixing on bracket of suitable size and making electrical connection from light fitting to source with PVC insulated, sheathed alumium conductor cable of 1.5 Sqmm x 2 core complete with all as specified and directed by EIC. Make- Wipro Cat No . Wipro Cat No. LR02-291-XXX-57-XX, .or equivalent in Philips/ Havells

Taking down old unserviceable Geyser and supply fixing connecting with cold and hot water pipe lines and testing of storage water heater , 40V, SP, 25 ltrs capacity including PVC hot and cold water pipe connections. Make:- Bajaj Modle No Majesty-25) or equivalent as approved by the GE. Note:- Old geysers to be deposited in EM store yard.

Taking down main switches/MCB DBs of any capacity/type including MCBs.

S&F sheet metal enclosure for VTPN DB 4 way, double door including 63 Amp,25 KA,3 pole MCCB and space for accommodating of MCB SP required rating for outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 4 way, single door without bus bar, enclosure made up of CRCA sheet steel RAL 9003 powder coated, IP 30 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S&F MCB SPN 32 Amp 10 KA , 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge Make- Legrand/ Seimens/ Schinder.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ Seimens/ Schinder.

Fixing/hanging only ceiling fan 1200/1400mm sweep and connecting up including provision of 1.5 sqmm copper conductor cable from celing rose/ connector to fan complete all as specified and directed by Engr-in-Charge.

Taking down old us exhaust fan and S&F exhaust fan 300 mm sweep complete with louvers including all civil work like cutting and making circular opening in existing wall of kitchen etc ,including including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make:CG. Note: Old exhaust fan to be deposite in AGE E/M store.

S&F PVC body fresh air fan of 300 mm sweep in toilets compete with louvers including all civil work like cutting and making opening in existing wall of toilet etc ,including including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Taking out old energy meter and Supply and Fixing only single phase KWH meter with LCD display 10-40 Amp with box in existing position by providing wooden board first quality of size 250 mm x 300 mm, including making complete elctric connections all as directed specifed and directed by EIC. Note: Old meter to be deposite in AGE E/M store.

Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 (Using 20mm graded crushed stone aggregate), water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note: Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F rigid non metallic PVC conduit ISI marked of size 20mm dia,including of all tees, bends, elbows reducers,etc and fixing accessories such as coupler, lock nuts, saddles pipe hook etc. of 32 mm bore

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

M&L for clean, dry sand filled in trenches/ ducts for cushioning of cables complete all as specified. Note:- Punned thickness shall be measured & paid.

Brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified.

Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 x 3.5 sqmm, laid in trenches/floor or fixed on wall/ pole complete all as specified.

GI Tubes, 'medium grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 50 mm.

Taking up or down steel tubing and connction including cleaning for refixing or removal in store all as specified and directed of following size:-

25 mm bore

Supply , fixing & laying in repairs GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size Make: Surya Prakash / Jindal/ TATA / BST/ Swastik

25 mm bore

M&L for refixing of existing old GI tubing taking down under item 5 above and connections in new or old position including cleaning internally and externally, any grade/make laid in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

25 mm bore

Taking out UNSV Gun metal globe & S&F Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following size:- Make: Leader/ Zoloto/ sant

25 mm bore

20 mm bore

15 mm bore

Taking down u/s tank and Supply and fiixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer, ISI marked hoisting & fixed in position all as specified in SSR part-I of following capacity:- Make: Sintex (Ist Quality)/ Polywell/ Plasto

1000 Ltr capacity

500 ltr capacity

Taking down u/s float valve and M&L for PTMT float valve high pressure with high density plastic ball, with epoxy coated Aluminium rod screwed for iron pipe and fixed in all as specified and directed of following size:-

20 mm bore

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

Jyoti enterprises

RAJPATI CONSTRUCTION

M/S Shanti Traders