Krishnagir Dt BArgur Block MLACD 2024_25 Construction of PD Shop Building at Chinnapanamutlu Village Type I at Anchoor Panchayat BRG_90

Amount

1.Construction of PD Shop Building at Chinnapanamutlu Village Type I H/O Anchoor

Earth work excavation for foundation in all class of soils except hard rock requiring blasting including cost and conveyance of all etc.,complete

Filling with river sand including cost and conveyance of all materials to work site and all labour charges

Supply and Filling the basement Excavated earth other than sand including cost and Conveyance of all site etc. Complete.

Cement concrete 1:4:8 Using 40mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. .

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

For Column

For Lintel & Roof level Beam

Sunshade

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with CM 1:5, 12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Plastering with cement mortar 1:4mix to 20 mm thick includingcost and conveyance of all materials to site and all labour

Providing the following thickness of Granolothic pattern floor finishing with plain cement concrete cc 1:2: 4 using 10 mm to 12 mm size hard broken stone jelly and the top rubbed smooth etc complete complying with standard specification

Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supply and Cost of Steel door , Window, Ventilator

Door (0.75x 1.80m) D

Windows (0.90 x 1.30m)

Windows (0.75 x 0.90m)

Ventilator (0.90x0.60m)

Jolly (0.45x0.30m)

Towards Labour Charges of Fixing Steel Door including all Cost and conveyance

Towards Labour Charges of Fixing Steel Window and Ventilator including all Cost and conveyance

Supplying and errecting pull and push type rolling shutter with ISI make of approved size and section using 18GI sheet.the shutter shall be painted with paint charges etc.,

Provisions for electrification item including all cost and conveyance etc., all complete

Light Point and Fan Point

Fan set

Plug Point

Tube light Fitting

GI Pipe 25mm Service Connection

Service wire

Meter Board

EB Deposit

Provision of Water Supply & Sanitary arrangement

Supply and Fixing of EWC

Pvc Tank

110mm PVC Pipe

110mm PVC Elbow

32mm PVC Pipe

32mm PVC Elbow

32mm PVC Tee

Provision for writing Name board

Provision for Photo Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

KKM Construction (BID ID -1205113)