REPAIR / REPLACEMENT TO JOINERY, KITCHEN CABINET AND MISC B/R ITEMS IN WING III UNDER GE NASIK ROAD.

Amount

Taking down MS window/ventilators frames with shutters of any size and any description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note:work is to be executed for high rise bldgs.Any damage during dismantiling of window shall be made good by contractor without any financial effect.

Taking down carefully MS window shutters of any size and description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note:Work is to be executed for high rise bldgs and occupied qtrs on urgency basis,hinges shall also be cut as reqd to fit new window properly.contractors quoted rate deems to be inclusive of the said provision.

S&F aluminium(50 micron powder coated) frame for doors,windows,ventilators and glazed partition frame of any size with one or more rebates including joining cleat,beading,glazing clips and connected accessories as required for fixing etc.complete all as specified. Note.work is to be executed for high rise bldgs.

S&F aluminium (50 micron powder coated) door shutters,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,handles 2 nos in each door shutter,hinges,anodised aluminium snap beading screws etc complete all as specified. Note.Work is to be executed for high rise bldgs.The quoted rate shall be deemed to be including cost of supply and fixing 4.0 mm thick glazing and 12 mm thick particle board prelaminated all as per site requirement and direction of engr-in-charge.

S&F aluminium(50 micron powder coated) window and ventilator shutters,sliding type without sash bars,aluminium sections weighing 0.55kg/m including necessary joing cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,rollers anodised aluminium fittings required to windows fully functional. Note. The quoted rate shall include cost of supply and fixing SS wire cltoh 0.36mm nominal dia and average width of aperture 1.40 mm ,4.00 mm thick glazing for shutter.only size of opening shall be measured for the purpose of payment.each shutter shall not be measured.

S&F aluminium(50 micron powder coated) window and ventilator shutters,side hung type without sash bars,aluminium sections weighing 0.55kg/m including necessary joing cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg peg stay/tower bolt 150 mm long(1nos),hinges type B-21,100 mm long(2 Nos),suitable handle(2 Nos per shutter) complete all as specified and directed by engr-in-charge. Note. The quoted rate shall include cost of supply and fixing SS wire cltoh 0.36mm nominal dia and average width of aperture 1.40 mm ,4.00 mm thick glazing for shutter.only size of opening shall be measured for the purpose of payment.each shutter shall not be measured.

M&L for 3.0mm thick frosted sheet glass,ordinary quality and glazing with silicon gel in square n.exc 0.5sqm in each pane.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average witdth of aperture 1.40mm and fixed with stainless steel wire staples. Note. Work is to be executed at any height and situation.

Dismantling wrought iron or mild any description such as steel gate,steel frame works,purlins,rafter,railings,balusters and window guard bars and directed by engr-in-charge. Note.work is to be executed at any height and situation.

S&F framed work as in grill,doors or gates of angle or other section with gusset plates,braces,etc. complete,drilled for fixing of steel sheeting or other coverings,doors,etc to be prepared for hanging or sliding with and inlcluding either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging;also fastening and fixing Fe Grade 290(Gde E-165) complete all over and including applying two coats of synthetic enamel paint over a coat of primer all as specified and directed by engr-in-charge. Note.work is to be executed at any height and situation.

M&L for preparation of old painted wooden surfaces of any description,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wooden surfaces of any description,not otherwise described,over 10cm width or girth and applying two coats of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint of tint as directed by engr-in-charge.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint of tint as directed by engr-in-charge.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs,soffits of the lintels etc. After fixing of new chowkhat or frame to match the existing surface. Note.work is to be executed at any height and situation.

S&F Factory made single extruded WPC (Wood Polymer Composite) Prelaminated solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note.shade of the shutter shall be as approved by GE.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) exc 1.5 sqm but n. exc 4 sqm each and making good the jambs,soffits of lintels etc. after fixing of new chowkhat or frame to match the existing surface. Note. Work is to be executed at any height and situation.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Prelaminated solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note. The shade of the shutter shall be as approved by GE.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Prelaminated solid decorative type flush door shutter (with provision of fixing mosquitto proofing in decorative fashion as directed by GE) of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note.wire mesh door shutter shall be factory made.quoted rate deems to be inclusive of all additional cost for cutting opening in door shutter in size and shape(designer) as directed by engr-in-charge,wastage and wiremesh beading etc.wiremesh shall not be paid separately.Material test certificate and authentication should be provided by the tender.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm(double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge over and including M.S. hold fast/ lugs or SS dash fasteners etc. Note. The shade of the shutter shall be as approved by GE.Material test certificate and authentication should be provided by the tender.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners. Note. The shade of the shutter shall be as approved by GE.Material test certificate and authentication should be provided by the tender.

Taking down shutters of any description n.exc 1 sqm each. Note. Work is to be executed at any height and situation.quotated rate shall also deemed to be inclusive of all carpenter work required to fit new shutters of any thickness to frame.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each. Note. Work is to be executed at any height and situation.quotated rate shall also deemed to be inclusive of all carpenter work required to fit new shutters of any thickness to frame.

Taking down shutters of any description exc 2 sqm each. Note. Work is to be executed at any height and situation.Note. Work is to be executed at any height and situation.quotated rate shall also deemed to be inclusive of all carpenter work required to fit new shutters of any thickness to frame.

Re-fixing in shutters of any description n.exc 1.00 sqm each, in the same opening complete all as specified and directed by engr-in-charge. Note.The quoted rate shall be deemed to be inclusive of all beading and carpenter work are required to complete the work in all respect.

Re-fixing in shutters of any description exc 1.00 sqm n.exc 2.0 sqm, each in the same opening complete all as specified and directed by engr-in-charge. Note.The quoted rate shall be deemed to be inclusive of all beading and carpenter work are required to complete the work in all respect.

Re-fixing in shutters of any description exc 2.00 sqm each, in the same opening complete all as specified and directed by engr-in-charge. Note.The quoted rate shall be deemed to be inclusive of all beading and carpenter work are required to complete the work in all respect.

S&F 125mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type B-21.

S&F 200mm size aluminium anodised,barrel tower bolts of extruded section and fixed.

S&F 300 mm size aluminium alloy,anodised,sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed.

S&F extruded aluminium alloy handles,125mm size,fabricated type,anodised.

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar.

M&L for 18 to 20 mm thick Granite(telephonic black of highest grade/quality as approved by GE) work (Table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick.over and including different type shade/colour all as specified and directed. Note.Granite shall be telephonic black only.In aluminium windows granite shall be used in jambs of windows,umbra etc,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polshing complete.

Rounding to edges of stone slabs one edge,such as in steps,cooking platform and other similar situations(stone slabs so provided shall not be less than 900mm in length).

M&L for fixing in repairs 1mm thick,20-25 mm bore matt finish stainless steel(SS-201grade) curtain rod best quality as approved by Engr-in-charge over and including suitable projecting type brackets,end finals,socket for dead ends of pipe as the case may be.complete all as specified and directed.

Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blankets,kitchen cabinets board any thickness,including cover fillets,frame etc.

M&L for Factory made 18 mm thick 100% Solid WPC(wood polymer composite) Prelaminated board of required size comprising of virgin PVC resin of K value value 57-60(suspension grade),Calcium carbonate and natural fibers(woos powders/rice husk/wheat husk) and non toxic additives,made from extrusion process WPC foam sheet single extruded(inner) with density not less than 650kg/cum,having good screw holding capacity(screw withdrawal strength of 200 N(Face) & 1100 N (Edge),minimum compressive strength of 50N/mm2,modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/borer free.water/moisture proof,Fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk ss crews all as per direction of engr-in-charge. Note. The quoted rate shall also be deemed to be inclusive of suitble handle for shutters. Material test certificate and authentication should be provided by the tender.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30(single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners. Note. The quoted rate shall also be deemed to be inclusive of suitble handle for shutters.

Supply and fix in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm ,duly assembled and fixed to wall with wall screws/fasterners all as specified and directed.

S&F in repairs aluminium extruded section Door closer hydrau?lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F aluminium (overall length of cover plate150mm) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm for wiremesh doors,windows etc over and including beading,screws as required to complete the work in all respect.

Resecuring or easing and adjusting without taking down shutter of any description n.exc 1.0 sqm each.complete all as specified and directed by engr-in-charge. Note. Quoted rate shall be deemed to be inclusive of all builders hardware and carpenter work required to resecure the shutters on urgent basis.

Resecuring or easing and adjusting without taking down shutter of any description exc 1.0 sqm and n.exc 2.0 sqm each.complete all as specified and directed by engr-in-charge. Note. Quoted rate shall be deemed to be inclusive of all builders hardware and carpenter work required to resecure the shutters on urgent basis.

Resecuring or easing and adjusting without taking down shutter of any description exc 2.0 sqm each.complete all as specified and directed by engr-in-charge. Note. Quoted rate shall be deemed to be inclusive of all builders hardware and carpenter work required to resecure the shutters on urgent basis.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 90,965.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Vinod Enterprises (BID ID -3108467)

MANOVANDANA CONSTRUCTION (BID ID -3119922)

M/S SAMEER SUBHASH PATANI (BID ID -3107380)

Abhiraj Enterprises (BID ID -3108860)

Bidder Name

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

Vinod Enterprises

Abhiraj Enterprises

MANOVANDANA CONSTRUCTION