Renovation / Modification of Seed Testing Lab Building for Tissue Culture Lab at Sippighat SW Providing and EEI

Amount

1. WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group-C

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

c) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

d) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

e) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.. a) 5/6 A switch

b) 15/16 A switch

c) 3 pin 5/6 A socket outlet

d) 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.. a) 3 Module (100 mmX75 mm)

b) 4 Module (125 mmX75 mm)

c) 6 Module (200 mmX75 mm)

d) 8 Module (125 mmX125 mm)

e) 12 Module (200 mmX150 mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

2. MCB & DB's Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 8 way (4 + 24), Double Door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 4 way (4 + 12), Double Door

Supplying and fixing MCB Enclosure Sheet Steel, Phosphatized Powder Painted with Din Rail for mounting MCB's (But without MCB's and Incomer as required. a) 4 Way

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

b) Triple pole and neutral

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

b) 63 Amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

b) 63 Amps

3. Fitting and Fixtures Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying of 12 Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP 12W/B22 as., as required.

Supplying of LED Bulkhead fitting 10W similar to Crompton cat No. LBHP - 10- CDL suitable for indoor and outdoor applications or its equivalent.

Supplying and fixing of surface mounted LED Batten Fitting for 20 Watt T-8 Lamp similar to Crompton Cat No. DMLN1LT8-16 with LED 20 Watt T-8 Tube Lamp similar to Crompton Cat No. LT8-20-865-2 or its equivalent

Supplying of A.C Ceiling fan (1200 mm) sweep 5 Star rated without regulator i/c wiring down rod of standard length (upto 30 cm) with all accessories etc as required. Similar to make Crompton Code No. Empower 50-5 Star & ISI Marked or its equivalent

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of Ventilating Fan of 150 mm sweep, similar to Havells Model Ventil Air DXZ or equivalent to ISI Standards

Supplying fo Ventilating Fan of 200 mm Sweep, similar to Havells Model Ventil Air DX white or equivalent to ISI Standards.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

4. Earthing Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2000mm, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required

5. UG Cable Supplying and Laying of following sizes of XLPE insulated Heavy duty armoured Aluminium conductor UG Cable of 1.1 KV grade conforming to IS:7098 (Part-I) and IS No. 1554 (Part-I) 1988 as applicable Make: CCI/Gloster/Havells/ Polycab/ Finolex etc., as required. a) 6 Sqmm x 2 Core

b) 50 Sqmm x 3.5 Core

c) 185 Sqmm x 3.5 Core

Supplying and Laying of One Number Double Walled Corrugated high density polythelene Pipe having corrugated on the outer wall and plain surface inner wall confirming to IS: 14930 Part -I & II completed with necessary HDPE ground cable directly in ground at depth of 50 cm i/c excavation and refilling the trench as required. a) 40 mm outer and 32 mm inner dia Nominal Size.

b) 90 mm outer and 76 mm inner dia Nominal Size.

c) 145 mm outer and 126 mm inner dia Nominal Size.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

b) Above 35 sq. mm and upto 95 sq. mm

c) Above 95 sq. mm and upto 185 sq. mm

6. External Lighting Supplying and Erection of Metallic Pole of 40 mm dia, 2.5 meter Long in cement concrete 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregated 40mm nominal size) foundation including excavation and refilling etc., and plastering the concrete for fixing light fitting with painting of one coat of metallic primer and 2 coats of synthetic enamel paint, fixing of SMC box of 200 x 140 x 95 mm (inside) to house 4 pole connector and 6 amps MCB with clamping arrangement for SMC box etc., as required.

Supplying and fixing of LED Post top lantern similar to Crompton Cat no.LPTH-20-W or its equivalent.

7. Air Conditioner, Air Purifier & Air Curtain SITC of 2 Ton 5 Star Split Type Digital Invertor Air Conditioner having the following features glossy finish, high air throw, 4 way Air Direction, filter cleaning indicator, anti bacterial coating, auto clean, dehumidification and auto restart as required. similar to Mitsubishi model MSZ- HP24VA or its equivalent

Supplying and installation of 4KVA Stabilizer, 12A , 170V - 270V operation with 20 Sec. initial time delay start, quick start and auto cut off as required

Supplying and fixing of pre-fabricated stand for outdoor of Split Type AC of capacity 1/1.5 /2 ton as required.

Providing and Fixing 1No. Analog 24 Hours programmable Time Switch (SST-15 min) along with 2 Pole 20 Amps Power Contactor for Air Conditioner

Providing and Fixing AC smart Controller (ATM Timer) for alternate operation of Air Conditioner in 24 Hrs (for complete day) along with Four Pole 20 A Power Contactor

SITC of Air Purifier mark V of capacity 3500sqft. having prefiter, Ioniser or ESP, Activated Carbon filters, HEPA Filter & Ultra violet Tube etc as required

SITC of 4 feet stainless steel high velocity Air Curtain operating in 220V/50Hz (single phase), 560 w, 21 m/s Air Throw as required

Installation, Testing and Commissioning of 1.5 /2 Ton Split Type Air Conditioner i/c cutting, drilling holes on the wall for passing gas pipes, cementing, painting to give on even look and smooth finish, wrapping PVC non adhessive white tape over insulation of gas pipe and fixing of prefabricated stand, voltage stabilizer, connection etc., required and as per the direction of engineer-in-charge.

8. Fire Alarm Supplying installation testing and commissioning of 4 Zone Fire Alarm Control Panel with LED Display make: CE with Backup Batteries or its equivalent as required.

Supplying, installation testing and Commissioning of conventional photo Electronic smoke detector make: CE or its equivalent as required

Supplying, installation testing and Commissioning of Manual Call Point make: Agni or its equivalent as required

Supplying, and fixing of response indicator make: Agni or its equivalent as required

Supplying, and fixing of Strobe hooter/Sounder make: CE or its equivalent as required

Wiring with 2 Core 2.5 Sqmm FRLS armoured cable with all accessories as required

SITC of Water Softener plant of capacity of 1000 Ltrs. / Hr (minimum) with the out put water quality of less than 5 ppm having auto and manual mode operation and it consists of Raw Water Pump, Disc Filter, multi- grade sand filter, resin softner, Jumbo Cartridge filter, ultra violet lamp, regeneration tank and control panel are mounted on the plant skid with necessary UPVC Pipe line from Raw Water Tank to plant upto treated water tank (within 3 mtrs.) including multiport valves for back wash, rinnse and service operation of reputed make similar to lon Exchange, Siddhant Water, GES and Eureka Forbes Ltd. complete as required.

Transportation of Genset with electrical panel and other equipments / items from existing Lab at Jirgatang to proposed tissue culture Lab at Sippighat Agriculture Farm (Coffee bagicha) by means of mechanical transport including lifting, Loading and positioning at work site as required.

M/s G K Construction

M/s Sai Electrical Works

BLUE CHIP CONSULTANCY SERVICE

SHANTI ENTERPRISES