Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.7 LAccepted-AOC H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹49.1 L+₹74,359.65 (1.54%)Rejected-AOC | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹49.4 L+₹96,946.10 (2.00%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹49.6 L+₹1.2 L (2.43%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹49.6 L+₹1.2 L (2.44%)Rejected-AOC N S T COLONY CIRCULAR ROAD HOUSE NO 04 DMC DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹48.0 L
EMD Value
₹95,920
Closing Date
15 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIRS TO BLDG NO P170 OF 12 I R AND O FLT ADDN ALT TO BLDG NO T20 QUARTER GUARD BATHROOM OF BLDG NO T-15 OF 3 CESR CAFETERIA NEAR BLDG NO P105 UMED VIHAR PROVN OF SEPTIC TANK WITH CONNECTED PIPELINES SYSTEM NEAR PSY WARD BLDG NO T19 FOOTPATH W
2023_MES_609260_1
8558/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹95,920
12 Sept 2023
15 Jul 2023
17 Aug 2023
15 Jul 2023
15 Aug 2023
3 Aug 2023
15 Jul 2023 - 21 Jul 2023
Amount
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering etc complete all as specified and as directed.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed.
Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
M&L for rendering 15 mm thick in CM (1:4) on one side of lathing finished even and smooth without using extra cementetc complete all as specified and as directed.
M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and as directed..
Material & labour for brick work with sub class 'B' bricks old size straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed.
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames ) etc complete all as specified and as directed.
Taking down Chowkhat or frames exceeding 1.5 Sqm but not exc 4 sqm each with shutters(Without taking off shutters from the frames.) etc complete all as specified and as directed.
S&F size of frame 125 x 60mm Pressed steel frames(1.25mm thick MS sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and as directed.
M&L for 30mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.
M&L 35mm thick factory made 2nd class hard wood Glazed and skelton shutter factory made, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed.
S&F Anodised aluminium ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and as directed.
S & F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed by the Engineer-in-Charge
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed.
Supply and fixing in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing in repair 3 mm thick frosted glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge.
S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each etc complete all as specified and as directed.
S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each etc complete all as specified and as directed.
S&F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium frame work etc complete all as specified and as directed.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.
S&F 4 levers brass mortices lock, vertical type, size 100mm etc complete all as specified and as directed.
S&F Aluminium (Die cast) body , Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed etc complete all as specified and as directed.
S & F 100 size stainless steel butt hinges etc complete all as specified and as directed.
S & F 75 size stainless steel butt hinges etc complete all as specified and as directed.
Supply & Fixing 150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed.
Supply & Fixing 100 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed.
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and as directed.
S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed.
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint incl primer complete all as specified and directed.
S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.
M&L for 2 mm thick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface etc complete all as specified and as directed.
M&L for Preparation of plasterded or un plastered new surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.
All as per item no. 52.00 here-in-before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new wooden surfaces etc complete all as specified and as directed.
Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.
Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.
M&L for 25mm thick Cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate, finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L for PCC (1:3:6) type C-2, 75 mm thick using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed.
M & L for screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed.
M & L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed of 15 mm thick CM (1:6) etc complete all as specified and as directed.
All as per item No. 62.00 here in above but as in skirting/dados laid over and including 10mm thick backing coat in CM (1:4) etc complete all as specified and as directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and incl 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
All as per item No. 64.00 here-in-before but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick CM (1:4) screed bed etc complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, laid over and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed.
S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification etc complete all as specified and as directed.
M&L for cement concrete type C2 (1:3:6) type C2, using 40 mm graded stone agg as in surface channels and drains etc complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate as in roof kerb complete all as specified and directed.
Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed.
M&L for TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for precast cement concrete type B1 (1:2:4) type B2, Using 20 mm graded stone aggregate as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar (1:6) including necessary formwok complete all as specified and directed.
Taking up or down steel tubing and connections for 15 mm bore GI tubing etc complete all as specified and as directed.
Taking up or down steel tubing and connections for 20 mm bore GI tubing etc complete all as specified and as directed.
S&F steel tubes medium grade, galvanised including all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and as directed.
S&F steel tubes medium grade, galvanised including all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and as directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed.
M&L in repair for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete etc complete all as specified and as directed.
M&L in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader etc complete all as specified and as directed.
S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified (Make Cera, F1020106 or equivalent as approved by GE) etc complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed.
S& F in repairs Pillar taps, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed.
Supply and fixing 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking up or down old unserviceable valve complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers etc complete all as specified and as directed.
S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc complete all as specified and as directed.
Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and as directed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and as directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified.
S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and as directed.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc complete all as specified and as directed.
S & F 110mm bore PVC (SWR) junction single ,(Single T) equal or unequalcomplete all as specified and directed.
S&F of 110mm dia PVC (SWR) bends etc complete all as specified and as directed.
S&F 75mm PVC(SWR) bends any radius with acess door etc complete all as specified and as directed.
S&F of 75mm dia PVC (SWR) Vent cowl etc complete all as specified and as directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and as directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc complete all as specified and as directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed.
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of brick or concrete work even and smooth without using extra cement in ceiling etc complete all as specified and as directed.
M & L rendering 15mm thick in cement mortar (1:3) mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement . NOTE:-WPC will be measured and paid separately etc complete all as specified and as directed.
Supply only integral water proofing compound etc complete all as specified and as directed.
M & L for providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing membrane comprising of the following etc complete all as specified and as directed. (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. (d) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over polymeric membrane. (e) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.
Dismantling water tank of exc 250 ltr and not exc 500ltr Capacity etc complete all as specified and as directed.
S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified and directed.
Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m etc complete all as specified and as directed.
M&L for 10 mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.
Excavation over areas, n.exc 1.5m deep,and getting out for foundation, etc. soft/loose soil etc complete all as specified and as directed.
M&L for PCC (1:2:4) type B-2 150 mm thick (using 40mm graded crushed stone aggregate) as in Septic Tank etc complete all as specified and as directed.
M&L for RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shrlves and the like etc complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete etc complete all as specified and as directed.
S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia etc complete all as specified and as directed.
Excavation in trenches in soft/loose soil not exc 1.5mtr wide and not exc 1.5 mtr deep for foundation etc or for man holes not exc 10 sqm on plan and n.exc 1.5 m in depth and getting out etc complete all as specified and as directed.
M & L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete etc complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in man hole and like etc complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work etc complete all as specified and as directed.
M&L for Precast RCC (1:2:4)type B-1 using 20 mm graded stone aggregate in manhole/soakwell/septic tank slabs/covers etc including necessary form work complete set in cement mortar 1:6 etc complete all as specified and as directed.
S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required etc complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm etc complete all as specified and as directed.
Removing excavated soil to a dist n.exc. 50m and depositing where directed at a level n.exc.1.5m above the starting point etc complete all as specified and as directed.
M&L for mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.
M&L for rolled steel sections as in framing for clazing and the like fixed with angles cleats and connecting plates with timber foer eaves board etc complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and as directed.
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm complete including etc complete all as specified and as directed.
M&L for preparation of wood and wood based Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic paint over a coat of pink primer etc complete all as specified and as directed.
Welded steel wire fabric weight not exc 4.00 kg per Sqm supplied and fixed complete to wood or steel members etc complete all as specified and as directed.
S&F for 12mm thick toughness glass as in partition including all fitting, fixtures rubber beading, jointing cleats etc all as specified and directed.
M&L for 18-20 mm thick granite (of any type) machine cut bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM (1:6) including grinding and polising etc complete all as specified and directed.
Surface excavation n exc 30 cm deep and average 15 cm deep and getting out in hard and dense soil etc complete all as specified and directed.
M&L for brickwork with subclass 'B" bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:4) etc complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work finished even and fair without using extra cement etc complete all as specified and directed.
M&L for preparation of newly prepared plastered surfaces and applying three coats of white wash etc complete all as specified and directed.
M&L for precast kerb stone with PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) etc complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge exc 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to true surface etc complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block of any colour any shape and size conforming to IS 15658-2006 of rubber moulded 60mm thickness, M-40 grade with grey cement and pigment etc complete all as specified and directed.
M&L for 50mm thick sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge.
(a) One light point controlled by one, one way switch .
(b) One Ceiling fan/ exhaust fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 150.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 152.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 42 Watt (Warm colour), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free warm white light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
M&L for Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and sown conductors above ground etc complete all as specified and as directed.
M&L for Air termination, single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and as directed etc complete all as specified and as directed.
M&L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. Head screw complete all as specified and as directed.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and as directed.
M&L for VTPN 4 way,double door 415 Volts, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs incl taking down of DBs complete all as specified and as directed.
Supply and fixing MCCB 3 Pole .415 Volts fixed type, 25-100 Amps with breaking capacity 16 KA complete with connection testing and commissioning all as specified and as directed.
M&L for metal clad AC socket point single pole and neutral enclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.
M&L for 1.5 sqmm wire 2 core PVC insulated sheathed flexible copper cable as per IS 694 complete all as per specified and directed.
Supply and fix Rigid non-metallic PVC conduit 25mm inclusive of all tees, bends, elbows, reducers, bell mouth tube ends, junction boxes and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.
M&L for decorative pandant, surface mounting,20w, dome shaped pedant in black finish dome shape reflector for glare free light including 18 watt LED lamp with B-22 base complete all as specified and directed.
M&L for Garden light LED 9W bollards(Wram colour)1 mtrs long in cylindrical shape with opal acrylic diffuser and IP66 protection complete all as specified and directed. Make : Havells/CG/Bajaj/Philips
Supply and fix Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers etc complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed.
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed.
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed.
M&L for modular white cover plate with frame 1 module complete all as specified and as directed.
M&L for modular white cover plate with frame 2 module complete all as specified and as directed
M&L for modular white cover plate with frame 3 module complete all as specified and as directed.
M&L for modular white cover plate with frame 8 module complete all as specified and as directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn through and including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm + one run of 4.0 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.
M&L for 20 W LED, 4', Wall mounted LED tube light fitting batten with LED single side or double side connection, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting including taking down old unsv light fitting complete all as specified and as directed.
M&L for 09 W LED, 2', Wall mounted polycarbonate batten internally pre-wired with electronic driver and polycarbonate diffuser and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting including taking down old unsv light fitting complete all as specified and as directed.
M&L in replacement for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv holder fitting complete all as specified and directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.
M&L for Bldg Security LED 1x20W light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting including taking down old unsv light fitting complete all as specified and directed.
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan/Exhaust Fan complete all as specifed and as directed.
M&L for Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two etc complete all as specified and as directed.
M&L for Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long etc complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs making good the distrubed surfaces of various rating capacity including taking down old unsv DB, complete all as specified and as directed.
M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.
M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.
M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed including taking out old unserviceable cable. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of 25 x 4mm size by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking out unserviceable earthing plate and accessories all as specified and as directed. (Note: Earth strip upto a length of 7.50 m from earthplate shall be deemed to be included in quoted rate.)
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable
VIHUTO YEPTHO
Ms ARENKOKLA CONTRUCTION
Shri Atoshe Tuccu
SHRI VIKASHE ZHIMOMI
SHRIi Bachulal shah
M/S MUNGA LAL PRASAD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .