Arresting Roof Leakage Works on Stores Building at LCA Tejas Division Plant-I, HAL BC.

Name of the individual/ Firm/ Company: *Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration

Address for Correspondence

PAN No.:

Service Tax Registration No.

Goods and service Tax ID No.

Contact Details

Registered Contractor

Related Document to be uploaded to HAL e Portal.

I.T Returns for past 03 Years (Assessment Years)

Related Document to be uploaded to HAL e Portal.

Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]

TURNOVER IN Rs.

Audited Report duly certified by the Auditor to be enclosed to support the Turnover.

ESI & PF Nos. with proof

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be uploaded to HAL e Portal( Cancelled cheque leaf to uploaded).

Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .

Related Document to be uploaded to HAL e Portal.

Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.

Type of work: [Incase of private works the same shall be supported with TDS certifcate]

Please Enter Details for Work No I.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III.

Details of person holding the Power of Attorney ( if different from the contact person)

Related Document to be uploaded to HAL e Portal.

Documents Need to Uploaded

Related Document to be uploaded to HAL e Portal.

DECLARATION I

DECLARATION II

Related Document to be uploaded to HAL e Portal.

DESCRIPTION

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)of total thickness 0.50 mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Dismantling corrugated steel/transperet roofing sheets including ridges,hips,valleys and gutters etc.,and stacking the material within 50 meters lead as Directed by Engineer in-charge.

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322.

Supplying and applying sealants on the existing self-tapping screws of Galvalume sheets, suitable for the galvalume surfaces, as per the manufacturers specifications, including preparation of surface, all required safety PPEs, etc, as directed by EIC.(A Performance Guarantee bond for 5 Years on Non judicial stamp paper of shall be given by the contractor. The 10% of completed value of this item shall be deducted as defect Liability Deposit and the same shall be returned after successful completion of 5 Years from the date of completion of contract / project as a whole).

Total (Exclusive of GST)

Percentage above or below for total value on Sl.No. 5

Total amount after Percentage Sl.No. 5 + Sl.No. 6

GST @ 18% for total value on Sl.No. 7

Total amount (Inclusive of GST) Sl.No. 7 + Sl.No. 8